65 C10 bagged and turbo 5.3 Ls - Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Goodfellers_Kustoms · 01-03-2018, 12:51 PM

Finally joined here and figured I'd put the current build up.

1965 C10 long bed
w/ PB stage 3 front drop member, 3" drop spindles, Michigan Metalwork's flat control arms, Dominator 2600 bags, Shaved dash, firewall, and pinch welds, 22" transports, CPP drilled/slotted

Currently working on:

We were going the wishbone 3-link route for the rear. Decided to change it up and go triangulated 4-link.

Ordering parts to build the cast 5.3 LS motor and 4l80e up to handle a good amount of boost. Planning to run a big single s480+-

aggie91 · 01-03-2018, 02:34 PM

Welcome to the forum!

Looks like its off to a good start. Who's valve cover adapters did you use on the LS?

tinydb84 · 01-03-2018, 02:43 PM

Love that color combo. Which intake is that?

**hewittca** · 01-03-2018, 03:02 PM

Cool truck! Question, where did you find 3.5" drop spindles?!

Goodfellers_Kustoms · 01-03-2018, 04:12 PM

Quote:

Originally Posted by aggie91

Welcome to the forum!

Looks like its off to a good start. Who's valve cover adapters did you use on the LS?

Thanks, went with ICT Billet for the adapters. works perfect even has the stock o-ring type gasket milled in.

Goodfellers_Kustoms · 01-03-2018, 04:15 PM

Quote:

Originally Posted by tinydb84

Love that color combo. Which intake is that?

Same here, for a short time I had owned a matching 66 c10. Driveway looked good.

The intake is an ICT Billet intake, picked up due to being cheaper then the Holley sniper.

Goodfellers_Kustoms · 01-03-2018, 04:18 PM

Quote:

Originally Posted by hewittca

Cool truck! Question, where did you find 3.5" drop spindles?!

typo meant 3" but they're CPP drop spindles.

**DPowers** · 01-03-2018, 10:27 PM

Welcome to the forum.

**Captainfab** · 01-04-2018, 01:04 AM

Welcome to the forum

Good looking build you have going on.

Goodfellers_Kustoms · 01-09-2018, 04:10 PM

Been bad weather and busy lately. So figured I'd post some of the truck sold couple months ago.

Goodfellers_Kustoms · 02-13-2018, 04:37 PM

Finished up reworking the suspension. Currently I have the frame stripped down, and sending parts off to powder coat.

Jferrante · 02-13-2018, 05:14 PM

awesome! similar to my build but yours is cleaner. Following along

Bentbolt · 02-13-2018, 08:28 PM

How do you like the Michigan metalwork arms? I asked about them while back as a cheap option and only heard bad reviews about the company. Project looks great

Notch1988 · 02-13-2018, 09:35 PM

Keep the updates coming.

Goodfellers_Kustoms · 02-14-2018, 08:53 AM

Quote:

Originally Posted by Bentbolt

How do you like the Michigan metalwork arms? I asked about them while back as a cheap option and only heard bad reviews about the company. Project looks great

I like them, was kind of skeptic on strength at first but these things are built thick man.

Goodfellers_Kustoms · 02-15-2018, 10:02 AM

Maybe yall can help me out.

The Frame will be coated Por-15 black but having a hard time deciding on which color to go with for powder coating.
Going to do the front cross member, A-arms, Shock mounts, Motor mounts, Trans cross member, Rear 4-link bars.

Open to suggestions

Bentbolt · 02-15-2018, 11:05 AM

silvers or grays go with the engine color pretty well

slimjim66 · 02-15-2018, 03:13 PM

I agree with "bentbolt" grays and silvers will go well with the motor colour and then give you some contrast from he black frame. personally i would do a dark gray like a graphite or charcoal gray.

Goodfellers_Kustoms · 02-16-2018, 08:40 AM

Quote:

Originally Posted by Bentbolt

silvers or grays go with the engine color pretty well

Quote:

Originally Posted by slimjim66

I agree with "bentbolt" grays and silvers will go well with the motor colour and then give you some contrast from he black frame. personally i would do a dark gray like a graphite or charcoal gray.

Thanks yall, I was thinking the same thing. Going with a charcoal or graphite with a little metallic to give it a slight pop from the frame but not to much.

Goodfellers_Kustoms · 03-05-2018, 12:29 PM

Finished painting the frame last week. Also picked the stuff up from powdercoat over the weekend. Decided to change it up last second, and went with a bronze. Camera doesn't do this color justice

Notch1988 · 03-06-2018, 09:17 PM

Looks good. I think the hardest part of my build is deciding color and what part gets what color. I've got a big bag of titanium bronze powder that I once had decided on and now I've changed my mind. So frustrating LOL

Goodfellers_Kustoms · 03-12-2018, 01:52 PM

slowly going back together. I've been waiting on engine and turbo parts to come in.

Goodfellers_Kustoms · 05-21-2018, 10:58 AM

https://www.youtube.com/watch?v=_cuFs8iOqDw

65 c10 bagged turbo ls build - YouTube

**Sac** · 05-21-2018, 05:18 PM

Liking the color combo, looks good together.

Goodfellers_Kustoms · 02-05-2019, 04:08 PM

disappointed to say that we havent made much lead way on the truck. Parts are sitting on the shelves. Work and life have gotten in the way

On a good note tho we're in the process of moving shop.

01-03-2018, 12:51 PM	#1
Goodfellers_Kustoms Registered User Join Date: Dec 2017 Location: LaPlata, MD Posts: 13	65 C10 bagged and turbo 5.3 Ls - Build Finally joined here and figured I'd put the current build up. 1965 C10 long bed w/ PB stage 3 front drop member, 3" drop spindles, Michigan Metalwork's flat control arms, Dominator 2600 bags, Shaved dash, firewall, and pinch welds, 22" transports, CPP drilled/slotted Currently working on: We were going the wishbone 3-link route for the rear. Decided to change it up and go triangulated 4-link. Ordering parts to build the cast 5.3 LS motor and 4l80e up to handle a good amount of boost. Planning to run a big single s480+- Attached Images __________________ Current - 65 C10/Turbo LS/Bagged Current - 32 Pickup Sold - 71 C10 Sold - 66 C10 Last edited by Goodfellers_Kustoms; 01-03-2018 at 04:19 PM.

01-03-2018, 02:34 PM	#2
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 65 C10 bagged and turbo 5.3 Ls - Build Welcome to the forum! Looks like its off to a good start. Who's valve cover adapters did you use on the LS? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-03-2018, 02:43 PM	#3
tinydb84 Registered User Join Date: Jul 2009 Location: San Jose Ca Posts: 2,871	Re: 65 C10 bagged and turbo 5.3 Ls - Build Love that color combo. Which intake is that? __________________ David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy

01-03-2018, 03:02 PM	#4
hewittca Senior Member Join Date: Jun 2014 Location: Mocksville, NC Posts: 1,723	Re: 65 C10 bagged and turbo 5.3 Ls - Build Cool truck! Question, where did you find 3.5" drop spindles?! __________________ Builds: Green Gus the 68 C10 ; Sullii the 72 1500 - Instagram: @dr.hewitt - C10 Concept/Development Photos: Master Thread

01-03-2018, 10:27 PM	#8
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,422	Re: 65 C10 bagged and turbo 5.3 Ls - Build Welcome to the forum. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-04-2018, 01:04 AM	#9
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 65 C10 bagged and turbo 5.3 Ls - Build Welcome to the forum Good looking build you have going on. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-09-2018, 04:10 PM	#10
Goodfellers_Kustoms Registered User Join Date: Dec 2017 Location: LaPlata, MD Posts: 13	Re: 65 C10 bagged and turbo 5.3 Ls - Build Been bad weather and busy lately. So figured I'd post some of the truck sold couple months ago. Attached Images __________________ Current - 65 C10/Turbo LS/Bagged Current - 32 Pickup Sold - 71 C10 Sold - 66 C10

02-13-2018, 04:37 PM	#11
Goodfellers_Kustoms Registered User Join Date: Dec 2017 Location: LaPlata, MD Posts: 13	Re: 65 C10 bagged and turbo 5.3 Ls - Build Finished up reworking the suspension. Currently I have the frame stripped down, and sending parts off to powder coat. Attached Images __________________ Current - 65 C10/Turbo LS/Bagged Current - 32 Pickup Sold - 71 C10 Sold - 66 C10

02-13-2018, 05:14 PM	#12
Jferrante Registered User Join Date: Jan 2015 Location: Arlington VA Posts: 359	Re: 65 C10 bagged and turbo 5.3 Ls - Build awesome! similar to my build but yours is cleaner. Following along

02-13-2018, 08:28 PM	#13
Bentbolt Registered User Join Date: Apr 2015 Location: New Sharon iowa Posts: 75	Re: 65 C10 bagged and turbo 5.3 Ls - Build How do you like the Michigan metalwork arms? I asked about them while back as a cheap option and only heard bad reviews about the company. Project looks great

02-13-2018, 09:35 PM	#14
Notch1988 Registered User Join Date: Aug 2009 Location: Lacombe, Alberta Posts: 335	Re: 65 C10 bagged and turbo 5.3 Ls - Build Keep the updates coming. __________________ 66 GMC swb dropmember accuair Link to my build: My GMC Project

02-15-2018, 10:02 AM	#16
Goodfellers_Kustoms Registered User Join Date: Dec 2017 Location: LaPlata, MD Posts: 13	Re: 65 C10 bagged and turbo 5.3 Ls - Build Maybe yall can help me out. The Frame will be coated Por-15 black but having a hard time deciding on which color to go with for powder coating. Going to do the front cross member, A-arms, Shock mounts, Motor mounts, Trans cross member, Rear 4-link bars. Open to suggestions __________________ Current - 65 C10/Turbo LS/Bagged Current - 32 Pickup Sold - 71 C10 Sold - 66 C10

02-15-2018, 11:05 AM	#17
Bentbolt Registered User Join Date: Apr 2015 Location: New Sharon iowa Posts: 75	Re: 65 C10 bagged and turbo 5.3 Ls - Build silvers or grays go with the engine color pretty well

02-15-2018, 03:13 PM	#18
slimjim66 Registered User Join Date: Nov 2017 Location: Toronto Posts: 158	Re: 65 C10 bagged and turbo 5.3 Ls - Build I agree with "bentbolt" grays and silvers will go well with the motor colour and then give you some contrast from he black frame. personally i would do a dark gray like a graphite or charcoal gray.

03-05-2018, 12:29 PM	#20
Goodfellers_Kustoms Registered User Join Date: Dec 2017 Location: LaPlata, MD Posts: 13	Re: 65 C10 bagged and turbo 5.3 Ls - Build Finished painting the frame last week. Also picked the stuff up from powdercoat over the weekend. Decided to change it up last second, and went with a bronze. Camera doesn't do this color justice Attached Images __________________ Current - 65 C10/Turbo LS/Bagged Current - 32 Pickup Sold - 71 C10 Sold - 66 C10 Last edited by Goodfellers_Kustoms; 03-05-2018 at 12:40 PM.



Register or Log In To remove these advertisements.

03-06-2018, 09:17 PM	#21
Notch1988 Registered User Join Date: Aug 2009 Location: Lacombe, Alberta Posts: 335	Re: 65 C10 bagged and turbo 5.3 Ls - Build Looks good. I think the hardest part of my build is deciding color and what part gets what color. I've got a big bag of titanium bronze powder that I once had decided on and now I've changed my mind. So frustrating LOL __________________ 66 GMC swb dropmember accuair Link to my build: My GMC Project

03-12-2018, 01:52 PM	#22
Goodfellers_Kustoms Registered User Join Date: Dec 2017 Location: LaPlata, MD Posts: 13	Re: 65 C10 bagged and turbo 5.3 Ls - Build slowly going back together. I've been waiting on engine and turbo parts to come in. Attached Images __________________ Current - 65 C10/Turbo LS/Bagged Current - 32 Pickup Sold - 71 C10 Sold - 66 C10

05-21-2018, 05:18 PM	#24
Sac Senior Member Join Date: Nov 2013 Location: Franklinton, LA Posts: 256	Re: 65 C10 bagged and turbo 5.3 Ls - Build Liking the color combo, looks good together. __________________ Green Survivor Father/Son Truck <SeveredTies>

02-05-2019, 04:08 PM	#25
Goodfellers_Kustoms Registered User Join Date: Dec 2017 Location: LaPlata, MD Posts: 13	Re: 65 C10 bagged and turbo 5.3 Ls - Build disappointed to say that we havent made much lead way on the truck. Parts are sitting on the shelves. Work and life have gotten in the way On a good note tho we're in the process of moving shop. Attached Images __________________ Current - 65 C10/Turbo LS/Bagged Current - 32 Pickup Sold - 71 C10 Sold - 66 C10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.