Power Steering Adapter Plates - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 11-07-2018, 01:34 AM

I really know nothing about those generator/power steering pump combos. I would think it would work as long as it is working properly. I'll send you a PM with ordering and payment info.

**Fleet '66** · 11-10-2018, 12:39 PM

Hi Capt. It's time for me to redo the PS update on my 66 C-10. The PO made a rather crude attempt at it and I need to clean it up a bit. He probably didn't know about your bracket. I believe that all I will need is just the plate and hardware but you might send me info on the tube and flange as well.

Thanks,
Bob...

**Captainfab** · 11-10-2018, 11:59 PM

I'll send you a PM.......

Quote:

Originally Posted by Fleet '66

Hi Capt. It's time for me to redo the PS update on my 66 C-10. The PO made a rather crude attempt at it and I need to clean it up a bit. He probably didn't know about your bracket. I believe that all I will need is just the plate and hardware but you might send me info on the tube and flange as well.

Thanks,
Bob...

**Fleet '66** · 11-11-2018, 12:42 PM

Received your PM and replied with request for further info. Thanks.

**Fleet '66** · 11-12-2018, 12:21 PM

PM received and payment sent via paypal. Thank you John.

**Captainfab** · 11-13-2018, 12:15 AM

Payment received, thanks

Quote:

Originally Posted by Fleet '66

PM received and payment sent via paypal. Thank you John.

**Fleet '66** · 11-17-2018, 08:30 PM

Received adapter plate in the mail today. Looks fantastic..as expected!! Thanks.

**Captainfab** · 11-18-2018, 12:33 AM

Thanks for the purchase and the compliment

mehoff400 · 01-13-2019, 09:44 PM

Does the steering shaft adapter need to be welded to the steering shaft?

dont have a welder so want to make sure i have everything needed.

**Captainfab** · 01-13-2019, 11:41 PM

No, the tube and flange does not have to be welded to the steering column shaft. It would be perfectly acceptable to drill thru both the tube and the shaft inside of it and install either a 1/4" or 5/16" grade 8 bolt.

Quote:

Originally Posted by mehoff400

Does the steering shaft adapter need to be welded to the steering shaft?

dont have a welder so want to make sure i have everything needed.

66_c10 · 03-06-2019, 12:06 AM

Does anyone have the pattern/template to install the power steering box in relation to the old holes? It would be nice to double check my work before I drill the holes. I would really appreciate it

**Captainfab** · 03-06-2019, 12:52 AM

My steering box adapter plate comes with a template to position the plate in the correct location.

Quote:

Originally Posted by 66_c10

Does anyone have the pattern/template to install the power steering box in relation to the old holes? It would be nice to double check my work before I drill the holes. I would really appreciate it

66_c10 · 03-06-2019, 01:24 AM

I know your plate is very nice just don't have the money right now. I already made a plate that places the box away from the frame and has the bolt hole layout of the box, just need to get it in the right position and drill my holes.

66_c10 · 03-06-2019, 10:36 AM

If I were to use the adapter plate will I run into any issues not being able to fully turn to the right, will the tire hit the steering box? Will I have any issue adjusting the alignment?

**Captainfab** · 03-07-2019, 12:21 AM

Regardless whether you use my adapter plate, one of the others on the market or the one you make, the turn to the right will be less than the turn to the left. It is just the nature of the installation. This is easily corrected during an alignment. No the right tire will not hit the steering box unless you have a very wide wheel with a deep backspacing. This power steering conversion has been done successfully thousands of times.

Quote:

Originally Posted by 66_c10

If I were to use the adapter plate will I run into any issues not being able to fully turn to the right, will the tire hit the steering box? Will I have any issue adjusting the alignment?

demian5 · 03-21-2019, 02:53 PM

Any install pictures on a 60-62? I'm having a tough time with the CPP kit and haven't committed to installing it yet. I have the box and shaft end, but I could go either way on the bracket.

66_c10 · 03-21-2019, 03:01 PM

Ok, thanks. I am going with my homemade bracket, just have to figure out where to position it and drill the holes so the pit-man arm is in the right place, its not the space shuttle right?

**Captainfab** · 03-22-2019, 12:01 AM

I do have some installed pics of the '60-'62 kit that I make. My products are not just a copy of someone else's product. My steering box adapter plates are a bit different than every other one on the market. So the pics of mine installed will likely not work with another brand of steering box adapter plate.

Quote:

Originally Posted by demian5

Any install pictures on a 60-62? I'm having a tough time with the CPP kit and haven't committed to installing it yet. I have the box and shaft end, but I could go either way on the bracket.

Budman56 · 04-03-2019, 03:27 PM

Payment sent for 63-66 powder steering bracket not powder coated. Thank you again.

**Captainfab** · 04-03-2019, 11:02 PM

Payment received.

**Vero67** · 04-27-2019, 03:01 PM

I sent you a paypal payment for a 67 K10 adapter plate. Thank you John

**Captainfab** · 04-27-2019, 11:40 PM

I received a couple blank PM's and an email from you? I assume that the payment I received from someone for a steering box adapter plate for a '67 K10 was you. There was no info with the payment to connect the person's real name to your user name here.

Quote:

Originally Posted by Vero67

I sent you a paypal payment for a 67 K10 adapter plate. Thank you John

**Vero67** · 04-28-2019, 07:00 AM

Yes it was me, not sure why the pm's were empty.

**Vero67** · 04-28-2019, 10:28 PM

I looked at the pm's. My replies are at the top of the PM. Do you need any more information?

**Captainfab** · 04-28-2019, 11:25 PM

I went back and looked. Your replies are hidden in the midst of my PM's to you. I do not have time to reread all of every PM I receive to determine what is old and what is a new message.

I will weld up a steering box adapter plate and ship it to the address on PayPal.

Quote:

Originally Posted by Vero67

I looked at the pm's. My replies are at the top of the PM. Do you need any more information?

11-07-2018, 01:34 AM	#826
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Power Steering Adapter Plates I really know nothing about those generator/power steering pump combos. I would think it would work as long as it is working properly. I'll send you a PM with ordering and payment info. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-10-2018, 12:39 PM	#827
Fleet '66 Active Member Join Date: Aug 2011 Location: Salem, Oregon Posts: 112	Re: Power Steering Adapter Plates Hi Capt. It's time for me to redo the PS update on my 66 C-10. The PO made a rather crude attempt at it and I need to clean it up a bit. He probably didn't know about your bracket. I believe that all I will need is just the plate and hardware but you might send me info on the tube and flange as well. Thanks, Bob... __________________ Fleet '66 ***************** '66 C-10 SWB 350 w/3 spd OD 4:11's - driver/project...future T-5 trans upgrade '64 C-10 LWB BBW near future project - "The Wife's Ride" '58 "Apache"Stepside BBW w/'75 K-10 4x4 conversion 331 w/350TH and NP 205 transfer 3:73's - occasional driver/ show

11-11-2018, 12:42 PM	#829
Fleet '66 Active Member Join Date: Aug 2011 Location: Salem, Oregon Posts: 112	Re: Power Steering Adapter Plates Received your PM and replied with request for further info. Thanks. __________________ Fleet '66 ***************** '66 C-10 SWB 350 w/3 spd OD 4:11's - driver/project...future T-5 trans upgrade '64 C-10 LWB BBW near future project - "The Wife's Ride" '58 "Apache"Stepside BBW w/'75 K-10 4x4 conversion 331 w/350TH and NP 205 transfer 3:73's - occasional driver/ show

11-12-2018, 12:21 PM	#830
Fleet '66 Active Member Join Date: Aug 2011 Location: Salem, Oregon Posts: 112	Re: Power Steering Adapter Plates PM received and payment sent via paypal. Thank you John. __________________ Fleet '66 ***************** '66 C-10 SWB 350 w/3 spd OD 4:11's - driver/project...future T-5 trans upgrade '64 C-10 LWB BBW near future project - "The Wife's Ride" '58 "Apache"Stepside BBW w/'75 K-10 4x4 conversion 331 w/350TH and NP 205 transfer 3:73's - occasional driver/ show

11-17-2018, 08:30 PM	#832
Fleet '66 Active Member Join Date: Aug 2011 Location: Salem, Oregon Posts: 112	Re: Power Steering Adapter Plates Received adapter plate in the mail today. Looks fantastic..as expected!! Thanks. __________________ Fleet '66 ***************** '66 C-10 SWB 350 w/3 spd OD 4:11's - driver/project...future T-5 trans upgrade '64 C-10 LWB BBW near future project - "The Wife's Ride" '58 "Apache"Stepside BBW w/'75 K-10 4x4 conversion 331 w/350TH and NP 205 transfer 3:73's - occasional driver/ show

11-18-2018, 12:33 AM	#833
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Power Steering Adapter Plates Thanks for the purchase and the compliment __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-13-2019, 09:44 PM	#834
mehoff400 Registered User Join Date: Apr 2015 Location: Puyallup WA Posts: 362	Re: Power Steering Adapter Plates Does the steering shaft adapter need to be welded to the steering shaft? dont have a welder so want to make sure i have everything needed. __________________ 66 c10 patina 250 T-5 My truck

03-06-2019, 12:06 AM	#836
66_c10 Registered User Join Date: Jun 2018 Location: Temecula, CA Posts: 23	Re: Power Steering Adapter Plates Does anyone have the pattern/template to install the power steering box in relation to the old holes? It would be nice to double check my work before I drill the holes. I would really appreciate it

03-06-2019, 01:24 AM	#838
66_c10 Registered User Join Date: Jun 2018 Location: Temecula, CA Posts: 23	Re: Power Steering Adapter Plates I know your plate is very nice just don't have the money right now. I already made a plate that places the box away from the frame and has the bolt hole layout of the box, just need to get it in the right position and drill my holes.

03-06-2019, 10:36 AM	#839
66_c10 Registered User Join Date: Jun 2018 Location: Temecula, CA Posts: 23	Re: Power Steering Adapter Plates If I were to use the adapter plate will I run into any issues not being able to fully turn to the right, will the tire hit the steering box? Will I have any issue adjusting the alignment?

03-21-2019, 02:53 PM	#841
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	Re: Power Steering Adapter Plates Any install pictures on a 60-62? I'm having a tough time with the CPP kit and haven't committed to installing it yet. I have the box and shaft end, but I could go either way on the bracket. __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC

03-21-2019, 03:01 PM	#842
66_c10 Registered User Join Date: Jun 2018 Location: Temecula, CA Posts: 23	Re: Power Steering Adapter Plates Ok, thanks. I am going with my homemade bracket, just have to figure out where to position it and drill the holes so the pit-man arm is in the right place, its not the space shuttle right?

04-03-2019, 03:27 PM	#844
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: Power Steering Adapter Plates Payment sent for 63-66 powder steering bracket not powder coated. Thank you again. Attached Images __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

04-03-2019, 11:02 PM	#845
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Power Steering Adapter Plates Payment received. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-27-2019, 03:01 PM	#846
Vero67 Registered User Join Date: May 2013 Location: Vero Beach FL Posts: 290	Re: Power Steering Adapter Plates I sent you a paypal payment for a 67 K10 adapter plate. Thank you John



Register or Log In To remove these advertisements.

04-28-2019, 07:00 AM	#848
Vero67 Registered User Join Date: May 2013 Location: Vero Beach FL Posts: 290	Re: Power Steering Adapter Plates Yes it was me, not sure why the pm's were empty.

04-28-2019, 10:28 PM	#849
Vero67 Registered User Join Date: May 2013 Location: Vero Beach FL Posts: 290	Re: Power Steering Adapter Plates I looked at the pm's. My replies are at the top of the PM. Do you need any more information?

Register or Log In To remove these advertisements.