I know this isn't a C10 and off topic - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bagged1972 · 01-21-2014, 09:26 PM

well here it is I ran across this 65 Divco milk truck and I was trying to figure out what to do with it cause I don't won't to send it to the crusher and I'm a true believer of everything can be fixed but anyway does anyone know if I can take the body off and sit on a 67-72 C10 frame thanks guys for the help

flashed · 01-21-2014, 09:47 PM

WOW ,that thing is sooo cool.

Pro Performance · 01-21-2014, 10:08 PM

I like it! Would look sweet on a set of Diesel Wheels and laying on the ground. I don't have any information on fitting on a 67-72 frame, but sure anything is possible. I would check into the wheel base difference between the two frames, and go from there.

Bagged1972 · 01-21-2014, 10:45 PM

Thanks guys it will be sweet once it's finished it's gonna be a long road ahead but the good thing is just about everything on it that's rusted is flat and unbolts so maybe it won't be to bad. But anyway I own a 72 C10 and the wheel base is the exact same as the milk truck

LONGHAIR · 01-22-2014, 07:37 PM

That is awesome, I have wanted to build a Divco truck for years.

midniteblues · 01-23-2014, 07:21 PM

that will make a cool ride one day.

Bagged1972 · 01-23-2014, 07:43 PM

It's a long road ahead

team39763 · 01-23-2014, 10:03 PM

I would love to have something like that to use as a mobile tool box/shop truck.
Check this ad out.
http://sanantonio.craigslist.org/cto/4279168663.html

RaceAGMC · 01-24-2014, 06:33 PM

Where did you find that gem?

Bagged1972 · 01-24-2014, 06:53 PM

Buried deep in the woods in North Carolina they guy I got it from drove it in the early 80's the he parked it in the woods and never looked back

kamikazekyle05 · 01-24-2014, 10:12 PM

That thing is sweet!!!

3drburb · 01-25-2014, 11:56 AM

Thats a very nice truck you have.
I think you are on the right track with the frame, but keep in mind that the Divco have the steps into the van and the newer frame may be a little wider if so you will need to alter the floor but that may be needed to add seats anyway. If you find a 3/4 or 1 ton truck frame it should work better because the weight of the truck. You can also consider putting the newer crossmember and rearend on the old frame, this maybe be the best way to do it if the old frame is still solid.

I am considering this on my 1946 Chevy Package Delivery with the 127 wheelbase also.

Be extra carefull with this one its a very top heavy truck.

01-21-2014, 09:26 PM	#1
Bagged1972 Registered User Join Date: Aug 2013 Location: NC Posts: 113	I know this isn't a C10 and off topic well here it is I ran across this 65 Divco milk truck and I was trying to figure out what to do with it cause I don't won't to send it to the crusher and I'm a true believer of everything can be fixed but anyway does anyone know if I can take the body off and sit on a 67-72 C10 frame thanks guys for the help

01-21-2014, 09:47 PM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: I know this isn't a C10 and off topic WOW ,that thing is sooo cool.

01-21-2014, 10:08 PM	#3
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: I know this isn't a C10 and off topic I like it! Would look sweet on a set of Diesel Wheels and laying on the ground. I don't have any information on fitting on a 67-72 frame, but sure anything is possible. I would check into the wheel base difference between the two frames, and go from there.

01-21-2014, 10:45 PM	#4
Bagged1972 Registered User Join Date: Aug 2013 Location: NC Posts: 113	Re: I know this isn't a C10 and off topic Thanks guys it will be sweet once it's finished it's gonna be a long road ahead but the good thing is just about everything on it that's rusted is flat and unbolts so maybe it won't be to bad. But anyway I own a 72 C10 and the wheel base is the exact same as the milk truck

01-23-2014, 07:21 PM	#6
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: I know this isn't a C10 and off topic that will make a cool ride one day. __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

01-23-2014, 07:43 PM	#7
Bagged1972 Registered User Join Date: Aug 2013 Location: NC Posts: 113	Re: I know this isn't a C10 and off topic It's a long road ahead

01-23-2014, 10:03 PM	#8
team39763 Registered User Join Date: Feb 2007 Location: Texas Posts: 469	Re: I know this isn't a C10 and off topic I would love to have something like that to use as a mobile tool box/shop truck. Check this ad out. http://sanantonio.craigslist.org/cto/4279168663.html __________________ 1982 Silverado - SBE, cleaned up GM heads, small cam, TH350, 850 Demon, 4.56 gears, and caltracs. Best time so far 11.8@XXXMPH

01-24-2014, 06:33 PM	#9
RaceAGMC Registered User Join Date: Jul 2007 Location: Charlotte, NC Posts: 350	Re: I know this isn't a C10 and off topic Where did you find that gem? __________________ 70 CST, 6.0/ 4L80E in the works. Custom harness by 68 Short Step

01-24-2014, 06:53 PM	#10
Bagged1972 Registered User Join Date: Aug 2013 Location: NC Posts: 113	Re: I know this isn't a C10 and off topic Buried deep in the woods in North Carolina they guy I got it from drove it in the early 80's the he parked it in the woods and never looked back

01-24-2014, 10:12 PM	#11
kamikazekyle05 Registered User Join Date: Nov 2007 Location: Vernon, Texas Posts: 331	Re: I know this isn't a C10 and off topic That thing is sweet!!!

01-25-2014, 11:56 AM	#12
3drburb Registered User Join Date: Jul 2011 Location: Kent, WA. Posts: 834	Re: I know this isn't a C10 and off topic Thats a very nice truck you have. I think you are on the right track with the frame, but keep in mind that the Divco have the steps into the van and the newer frame may be a little wider if so you will need to alter the floor but that may be needed to add seats anyway. If you find a 3/4 or 1 ton truck frame it should work better because the weight of the truck. You can also consider putting the newer crossmember and rearend on the old frame, this maybe be the best way to do it if the old frame is still solid. I am considering this on my 1946 Chevy Package Delivery with the 127 wheelbase also. Be extra carefull with this one its a very top heavy truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.