KS 71 blazer getting parted - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-27-2011, 08:57 PM

Ryan, not sure size I can check Mon. Thanks Randy

Dzlhead · 03-27-2011, 09:09 PM

Zip is 53005 for the air cleaner. Thanks for being honest about the sides... it was a haymaker on my end.

Walts_restoration · 03-27-2011, 09:23 PM

no rush randy. Im packed all day tomorrow, but free tuesday. Let me know.

*sharpie1972* · 03-27-2011, 10:03 PM

Quote:

Originally Posted by teeitup

Sharpie, Dennis, the chrome pieces for rear panels are pretty decent, need a good cleaning and the pass side has some black paint on it $30 for those. The 6 side panel brackets $30 plus shipping on all

Thanks Randy

Hi Randy, I'll take the chrome strips and pass on the brackets.
Thanks, Sharpie

teeitup · 03-27-2011, 10:46 PM

Dzlhead and Sharpie, I'll get quotes Mon after work hopefully
Walts, I'll look after work
Thanks Randy

kilomanjaro · 03-28-2011, 02:49 AM

Hi Randy,
I am interested in the tailgate weatherstrip retainers...the metal strips that mount on the sides of the bedside just inside the tailgate. Let me know if they are in decent shape. Thanks
John

**too much stuff** · 03-28-2011, 09:58 AM

Randy, i think bigeasycigars has been looking for a blazer emblem. Lets give him a shot at one or both and let me know what is left. I will pass on the cst and 350 emblems.
Also, i see one rear top hold down, is the other one there?
Thanks, Eric

Fesser · 03-28-2011, 10:47 AM

How much for the AC ball holder things, w/screws; rear bumper brackets if still available; 6 side panel brackets; and the k5 Blazer emblems if they get to me? All to 94559.

Fesser · 03-28-2011, 10:54 AM

...and the wood trim pieces if they get to me...

**71blksuper4x4** · 03-28-2011, 11:18 AM

Randy, put me down for the woodgrain. I'll pass on the lockouts and thanks for getting back to me on the bucket brackets. Trevor

47thriftmaster · 03-28-2011, 04:56 PM

Quote:

Originally Posted by teeitup

47thriftmaster, Monte, sorry not making that trip down there. Fuel down pipe is the short one $25 plus shipping. I forgot to look at cig housing. I don't ship windshield chrome, sorry. Door shims are there $15 for set of 4. $30 for rear panel chrome, 3rd in line on them. $20 for outer chrome hubs and one good blue knob. All plus shipping
Thanks Randy

Randy,
Sounds good will pass on the wheels then. Will take the chrome hubs and one good blue knob, door shims, wait in line for the rear panel chrome, and still interested in a good cig housing. Will pass on the fuel down pipe.
Thanks, Monte

1949gmc · 03-28-2011, 06:00 PM

Quote:

Originally Posted by teeitup

1949gmc, no twist its straight but does have the one small dent. Pics coming. $80 plus shipping for bumper only, no brackets or tag holder
Thanks Randy

This is an OEM bumper, not a repop, correct? If its oem, I'll take it. PM me the total charges. Would you have decent shields and a tag holder to go with it?

Dirt1972 · 03-28-2011, 07:04 PM

Randy put me down for the center dash piece if you cut it up..also, how is the right side wheel house tub? Are those rust spots or oil marks?
Posted via Mobile Device

teeitup · 03-28-2011, 09:17 PM

kilomanjaro, John, not bad shape, each one has a ding in them. I'll have pics later tonight $10 plus shipping. Thanks Randy

teeitup · 03-28-2011, 09:19 PM

toomuchstuff, Eric, I'll give him first shot. Only has one rear top bracket. Thanks Randy

teeitup · 03-28-2011, 09:22 PM

Fesser, $20 for outer AC vents, they are in good shape. Rear bumper brackets, the inner ones have had a piece welded on them, they are good shape just a little extra stuff welded on them, outers are good $40 for all 4. 6 rear panel brackets $30. Blazer emblems $30, your 3rd right now on them. Woodgrain is sold already, sorry.
Thanks Randy

teeitup · 03-28-2011, 09:23 PM

71blksuper4x4, Trevor, chrome is yours. Thanks Randy

teeitup · 03-28-2011, 09:25 PM

47thriftmaster, Monte, chrome hubs and blue knob $20, cig housing $5, 3rd in line on rear panel chrome. Door shims $15 are yours. Thanks Randy

teeitup · 03-28-2011, 09:28 PM

1949gmc, its OEM original. It has some weather wear (I guess thats what you'd call it, I think it will wax out but not sure. Its hard to get a pic of it. It would look fine on a original truck. I have a set of gravel guards off it, one has a spot of rust $10 for the pair. I have the tag bracket $15 for it, has a bolt hole in middle where hitch was mounted, would be hidden when tag is on it. Thanks Randy

47thriftmaster · 03-28-2011, 09:29 PM

Randy,
got it $40 so far, if you don't mind I'll wait to see what happens with the panel chrome.
Monte

teeitup · 03-28-2011, 09:29 PM

Dirt72, not cutting center section out of this one, the whole dash will be cut out since it doesn't have the speaker slots on top side. Wheel tubs are junk, sorry. Thanks Randy

teeitup · 03-28-2011, 09:30 PM

Everyone, Pics of parts coming in a bit, never had a chance to get shipping quotes tonight, sorry. Thanks Randy

teeitup · 03-28-2011, 09:43 PM

pass side and surface rust down low pass side

teeitup · 03-28-2011, 09:45 PM

passs side splice

teeitup · 03-28-2011, 09:47 PM

pass side corner
and driver side splice

03-27-2011, 08:57 PM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Ryan, not sure size I can check Mon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-27-2011, 09:09 PM	#52
Dzlhead Registered User Join Date: Jan 2009 Location: Brookfield,WI Posts: 50	Re: 71 blazer getting parted Zip is 53005 for the air cleaner. Thanks for being honest about the sides... it was a haymaker on my end. __________________ '66 C-10 Panel '72 Jimmy 4x4

03-27-2011, 09:23 PM	#53
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: 71 blazer getting parted no rush randy. Im packed all day tomorrow, but free tuesday. Let me know. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

03-27-2011, 10:46 PM	#55
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Dzlhead and Sharpie, I'll get quotes Mon after work hopefully Walts, I'll look after work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 02:49 AM	#56
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: 71 blazer getting parted Hi Randy, I am interested in the tailgate weatherstrip retainers...the metal strips that mount on the sides of the bedside just inside the tailgate. Let me know if they are in decent shape. Thanks John __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

03-28-2011, 09:58 AM	#57
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,698	Re: 71 blazer getting parted Randy, i think bigeasycigars has been looking for a blazer emblem. Lets give him a shot at one or both and let me know what is left. I will pass on the cst and 350 emblems. Also, i see one rear top hold down, is the other one there? Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto Last edited by too much stuff; 03-28-2011 at 10:05 AM.

03-28-2011, 10:47 AM	#58
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 71 blazer getting parted How much for the AC ball holder things, w/screws; rear bumper brackets if still available; 6 side panel brackets; and the k5 Blazer emblems if they get to me? All to 94559.

03-28-2011, 10:54 AM	#59
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 71 blazer getting parted ...and the wood trim pieces if they get to me...

03-28-2011, 11:18 AM	#60
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,148	Re: 71 blazer getting parted Randy, put me down for the woodgrain. I'll pass on the lockouts and thanks for getting back to me on the bucket brackets. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

03-28-2011, 07:04 PM	#63
Dirt1972 Registered User Join Date: Apr 2009 Location: Mansfielde, Tx Posts: 33	Re: 71 blazer getting parted Randy put me down for the center dash piece if you cut it up..also, how is the right side wheel house tub? Are those rust spots or oil marks? Posted via Mobile Device

03-28-2011, 09:17 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted kilomanjaro, John, not bad shape, each one has a ding in them. I'll have pics later tonight $10 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:19 PM	#65
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted toomuchstuff, Eric, I'll give him first shot. Only has one rear top bracket. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:22 PM	#66
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Fesser, $20 for outer AC vents, they are in good shape. Rear bumper brackets, the inner ones have had a piece welded on them, they are good shape just a little extra stuff welded on them, outers are good $40 for all 4. 6 rear panel brackets $30. Blazer emblems $30, your 3rd right now on them. Woodgrain is sold already, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-28-2011 at 09:23 PM.

03-28-2011, 09:23 PM	#67
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted 71blksuper4x4, Trevor, chrome is yours. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:25 PM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted 47thriftmaster, Monte, chrome hubs and blue knob $20, cig housing $5, 3rd in line on rear panel chrome. Door shims $15 are yours. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-28-2011, 09:28 PM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted 1949gmc, its OEM original. It has some weather wear (I guess thats what you'd call it, I think it will wax out but not sure. Its hard to get a pic of it. It would look fine on a original truck. I have a set of gravel guards off it, one has a spot of rust $10 for the pair. I have the tag bracket $15 for it, has a bolt hole in middle where hitch was mounted, would be hidden when tag is on it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:29 PM	#70
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 71 blazer getting parted Randy, got it $40 so far, if you don't mind I'll wait to see what happens with the panel chrome. Monte

03-28-2011, 09:29 PM	#71
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Dirt72, not cutting center section out of this one, the whole dash will be cut out since it doesn't have the speaker slots on top side. Wheel tubs are junk, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:30 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Everyone, Pics of parts coming in a bit, never had a chance to get shipping quotes tonight, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:43 PM	#73
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted pass side and surface rust down low pass side Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-28-2011 at 09:43 PM.

03-28-2011, 09:45 PM	#74
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted passs side splice Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2011, 09:47 PM	#75
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted pass side corner and driver side splice Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-28-2011 at 09:48 PM.

Register or Log In To remove these advertisements.