NC Parting a complete 1971 Blazer 4x4 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 01-14-2012, 12:00 PM

Any chance the under dash lights are available with intact wiring? Pete

jeffg1010 · 01-14-2012, 12:36 PM

Quote:

Originally Posted by jaros44sr

Any word if the one good bucket seat sold, also need reinforcement plates on doors

I had someone wanting the seats mounting brackets, but the seat itself hasnt had any takers. In fact, the guy on the bracket hasn't replied either. Would you want to pick up or have it shipped. Philly is about 6 hours from Beckley.

Quote:

Originally Posted by DeadheadNM

Any chance the under dash lights are available with intact wiring? Pete

I've never even noticed these lights. Where are they located? I did see the light that goes in the heater, but I didn't pay attention to any others.

jaros44sr · 01-14-2012, 01:00 PM

[QUOTE=jeffg1010;5122445]I had someone wanting the seats mounting brackets, but the seat itself hasnt had any takers. In fact, the guy on the bracket hasn't replied either. Would you want to pick up or have it shipped. Philly is about 6 hours from Beckley.

How much for the seat, and what does the mount look like on the passenger side? Do you live near a greyhound bus terminal

How about the reinforcement plates on the back of the doors

jeffg1010 · 01-14-2012, 01:41 PM

[quote=jaros44sr;5122484]

Quote:

Originally Posted by jeffg1010

I had someone wanting the seats mounting brackets, but the seat itself hasnt had any takers. In fact, the guy on the bracket hasn't replied either. Would you want to pick up or have it shipped. Philly is about 6 hours from Beckley.

How much for the seat, and what does the mount look like on the passenger side? Do you live near a greyhound bus terminal

How about the reinforcement plates on the back of the doors

I just messaged the guy who had dibs on the brackets to see if he still wants them. Would you want JUST the seat minus brackets if he wants the brackets?

There is a greyhound station in Beckley (i think it's still there). The seat that is in good shape is the passenger seat. I'd like to get $50 for it -minus the bracket, ($75 with the bracket), but I have no idea what the shipping would be. I am sure it would be quite a bit cheaper minus the bracket.

Where are the reinforcement plates on the back of the door? Are they in the door or the door jamb? I am sure they are still there.

**DeadheadNM** · 01-14-2012, 02:39 PM

Some Blazers had under dash lights mounted on each side near the pulls for the kick panel vents. These would illuminate when the doors opened. Should be easy to locate if these are there....

lynnfield · 01-14-2012, 04:48 PM

I know it's a long shot, but I'd like to get in line for the gas tank.......been looking for one for a while. Thanks, Greg

jaros44sr · 01-14-2012, 08:04 PM

[quote=jeffg1010;5122552]

Quote:

Originally Posted by jaros44sr

I just messaged the guy who had dibs on the brackets to see if he still wants them. Would you want JUST the seat minus brackets if he wants the brackets?

There is a greyhound station in Beckley (i think it's still there). The seat that is in good shape is the passenger seat. I'd like to get $50 for it -minus the bracket, ($75 with the bracket), but I have no idea what the shipping would be. I am sure it would be quite a bit cheaper minus the bracket.

Where are the reinforcement plates on the back of the door? Are they in the door or the door jamb? I am sure they are still there.

Jeff, i would interested in just the seat. If you cut the hog rings on the bottom side flap vynil, you will have access to the mounting screws toremove the back. You can now ship it in two pieces. Soak the scews with PB Powerblaster for a couple days, if you cant get them out, just drill the phillips head, and ill deal with them

The reinforcement plate is located at the back of the door, by the closer. Dont drill the spot welds, just cut it larger with a sawsall. About a 1/2 " Larger on all sides

jeffg1010 · 01-14-2012, 08:14 PM

Quote:

Originally Posted by DeadheadNM

Some Blazers had under dash lights mounted on each side near the pulls for the kick panel vents. These would illuminate when the doors opened. Should be easy to locate if these are there....

Sounds easy enough. I'll check 'em out.

Quote:

Originally Posted by lynnfield

I know it's a long shot, but I'd like to get in line for the gas tank.......been looking for one for a while. Thanks, Greg

I'll let you know if he doesn't take it.

[quote=jaros44sr;5123087]

Quote:

Originally Posted by jeffg1010

Jeff, i would interested in just the seat. If you cut the hog rings on the bottom side flap vynil, you will have access to the mounting screws toremove the back. You can now ship it in two pieces. Soak the scews with PB Powerblaster for a couple days, if you cant get them out, just drill the phillips head, and ill deal with them

The reinforcement plate is located at the back of the door, by the closer. Dont drill the spot welds, just cut it larger with a sawsall. About a 1/2 " Larger on all sides

OK, good deal. I'll check on it and let you know.

jeffg1010 · 01-17-2012, 12:58 PM

Quote:

Originally Posted by highrpm

Did the gas tank straps go with the tank, if not I would be interested if the are in decent shape.

Thanks

Tank straps are off.
Did I give you a price yet? How about $20? They are decent.

[quote=jaros44sr;5123087]

Quote:

Originally Posted by jeffg1010

Jeff, i would interested in just the seat. If you cut the hog rings on the bottom side flap vynil, you will have access to the mounting screws toremove the back. You can now ship it in two pieces. Soak the scews with PB Powerblaster for a couple days, if you cant get them out, just drill the phillips head, and ill deal with them

The reinforcement plate is located at the back of the door, by the closer. Dont drill the spot welds, just cut it larger with a sawsall. About a 1/2 " Larger on all sides

I ran up last night and brought back a large load of parts. I brought the seats home with me, so I will try to take them apart this week.

teeitup · 01-17-2012, 01:29 PM

Got the parts today, THANKS Jeff, Randy

OL SKOOL · 01-17-2012, 04:49 PM

if gas pedal assembly still available does it come with the cable? if it does i will take it pm me for payment instructions and total 60129 zip. i will send postal money order i don't have paypal thank you.

tanman722001 · 01-18-2012, 12:31 AM

Do you still have the door panels,Arm rest.Sun visors,Radiator?Got and pics of any I listed?Thanks Tony

jeffg1010 · 01-18-2012, 12:37 PM

Quote:

Originally Posted by OL SKOOL

if gas pedal assembly still available does it come with the cable? if it does i will take it pm me for payment instructions and total 60129 zip. i will send postal money order i don't have paypal thank you.

I am pretty certain my dad said he cut the cable. Are you still interested in the assembly?

Quote:

Originally Posted by tanman722001

Do you still have the door panels,Arm rest.Sun visors,Radiator?Got and pics of any I listed?Thanks Tony

The arm rests and radiator are still available. Sun visors and door panels are sold.

**va72longhorn** · 01-18-2012, 01:09 PM

Jeff, I'll have to apologize early if I over looked it, but do you still have the fuel filler neck shroud? If so, how what would be the shipped price to 22701?

jeffg1010 · 01-18-2012, 01:12 PM

haha, ironic. I just pulled it out of the parts bin last night to hang on to it. I noticed mine doesn't have one. I am considering fab'ing a set of interior side panels, so I may not need it. I'll let you know.
Jeff

**va72longhorn** · 01-18-2012, 01:16 PM

Thanks, jeff, let me know. I have a Longhorn with a aux tank, but i think it'll work.

tanman722001 · 01-18-2012, 02:16 PM

What are you asking for them?Do you have any pics of them?

OL SKOOL · 01-18-2012, 04:20 PM

I'm just going to wait till i can get it all with the cable.Long way to go before i need a gas pedal.Thanx for your time .

jeffg1010 · 01-18-2012, 04:48 PM

Quote:

Originally Posted by tanman722001

What are you asking for them?Do you have any pics of them?

Are you gonna pick them up? If so, then how about $50.00 for the radiator and the armrests.

Armrests are in real good shape.

pics...

Radiator
The dark marks on the top is where some anti freeze spilled out when I pulled it out of the trailer. I don't think it's leaking because it was full when we pulled it out.

blazin71K5 · 01-19-2012, 02:52 PM

Jeff,
Payment was sent for the seat brackets.
Thanks again
Matt

205harleyman · 01-19-2012, 06:35 PM

Can Tou send me some pictures of top of windshield post where the top sits and points above vent windows?

72blazer_mud_bogger · 01-19-2012, 07:00 PM

when did you ship the handles and knob or when should I start lookin for the package?

**richard2717** · 01-19-2012, 08:27 PM

Jeff I will get in line for the black arm rests pending price with shipping to 21801

Thanks
Richard

jeffg1010 · 01-19-2012, 08:50 PM

Quote:

Originally Posted by 72blazer_mud_bogger

when did you ship the handles and knob or when should I start lookin for the package?

I picked the handles up on Tuesday, but I just got a box big enough to fit the shifter today. They should go out tomorrow. Thanks!

Quote:

Originally Posted by 205harleyman

Can Tou send me some pictures of top of windshield post where the top sits and points above vent windows?

It may take me a week or so to get them. The windshield frame is still in WV. Did you look through the 140+ photos in the photobucket link on page 1. There is some photos of that area, but nothing specifically targeting the point above the vent window.

Quote:

Originally Posted by richard2717

Jeff I will get in line for the black arm rests pending price with shipping to 21801

Thanks
Richard

I've got you on the list.

Quote:

Originally Posted by tanman722001

What are you asking for them?Do you have any pics of them?

Did you get my phone #?

72blazer_mud_bogger · 01-19-2012, 09:04 PM

You know I only need the knob on the Tcase shifter and not the entire shifter right?

01-14-2012, 12:00 PM	#101
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,286	Re: Parting a complete 1971 Blazer 4x4 Any chance the under dash lights are available with intact wiring? Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-14-2012, 01:00 PM	#103
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Parting a complete 1971 Blazer 4x4 [QUOTE=jeffg1010;5122445]I had someone wanting the seats mounting brackets, but the seat itself hasnt had any takers. In fact, the guy on the bracket hasn't replied either. Would you want to pick up or have it shipped. Philly is about 6 hours from Beckley. How much for the seat, and what does the mount look like on the passenger side? Do you live near a greyhound bus terminal How about the reinforcement plates on the back of the doors __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-14-2012, 02:39 PM	#105
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,286	Re: Parting a complete 1971 Blazer 4x4 Some Blazers had under dash lights mounted on each side near the pulls for the kick panel vents. These would illuminate when the doors opened. Should be easy to locate if these are there.... __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-14-2012, 04:48 PM	#106
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting a complete 1971 Blazer 4x4 I know it's a long shot, but I'd like to get in line for the gas tank.......been looking for one for a while. Thanks, Greg

01-17-2012, 01:29 PM	#110
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a complete 1971 Blazer 4x4 Got the parts today, THANKS Jeff, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-17-2012, 04:49 PM	#111
OL SKOOL Registered User Join Date: Feb 2010 Location: rochelle il. Posts: 356	Re: Parting a complete 1971 Blazer 4x4 if gas pedal assembly still available does it come with the cable? if it does i will take it pm me for payment instructions and total 60129 zip. i will send postal money order i don't have paypal thank you.

01-18-2012, 12:31 AM	#112
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Parting a complete 1971 Blazer 4x4 Do you still have the door panels,Arm rest.Sun visors,Radiator?Got and pics of any I listed?Thanks Tony __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

01-18-2012, 01:09 PM	#114
va72longhorn Registered User Join Date: Dec 2009 Location: Culpeper, VA Posts: 430	Re: Parting a complete 1971 Blazer 4x4 Jeff, I'll have to apologize early if I over looked it, but do you still have the fuel filler neck shroud? If so, how what would be the shipped price to 22701?

01-18-2012, 01:12 PM	#115
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: Parting a complete 1971 Blazer 4x4 haha, ironic. I just pulled it out of the parts bin last night to hang on to it. I noticed mine doesn't have one. I am considering fab'ing a set of interior side panels, so I may not need it. I'll let you know. Jeff __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

01-18-2012, 01:16 PM	#116
va72longhorn Registered User Join Date: Dec 2009 Location: Culpeper, VA Posts: 430	Re: Parting a complete 1971 Blazer 4x4 Thanks, jeff, let me know. I have a Longhorn with a aux tank, but i think it'll work.

01-18-2012, 02:16 PM	#117
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Parting a complete 1971 Blazer 4x4 What are you asking for them?Do you have any pics of them? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

01-18-2012, 04:20 PM	#118
OL SKOOL Registered User Join Date: Feb 2010 Location: rochelle il. Posts: 356	Re: Parting a complete 1971 Blazer 4x4 I'm just going to wait till i can get it all with the cable.Long way to go before i need a gas pedal.Thanx for your time .

01-19-2012, 02:52 PM	#120
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	Re: Parting a complete 1971 Blazer 4x4 Jeff, Payment was sent for the seat brackets. Thanks again Matt __________________ 71 2wd k5 67 Nova

01-19-2012, 06:35 PM	#121
205harleyman Registered User Join Date: May 2011 Location: birmingham, al Posts: 209	Re: Parting a complete 1971 Blazer 4x4 Can Tou send me some pictures of top of windshield post where the top sits and points above vent windows?

01-19-2012, 07:00 PM	#122
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: Parting a complete 1971 Blazer 4x4 when did you ship the handles and knob or when should I start lookin for the package?



Register or Log In To remove these advertisements.

01-19-2012, 08:27 PM	#123
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,887	Re: Parting a complete 1971 Blazer 4x4 Jeff I will get in line for the black arm rests pending price with shipping to 21801 Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-19-2012, 09:04 PM	#125
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: Parting a complete 1971 Blazer 4x4 You know I only need the knob on the Tcase shifter and not the entire shifter right?

Register or Log In To remove these advertisements.