The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 Chevy & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-04-2018, 10:17 PM   #1
BrokenBowties
Registered User
 
Join Date: Jun 2018
Location: Stowe
Posts: 1
Post Looking for advice

Hi ladies and gents. I've got a 2wd 94 suburban with a 5/7 beltech lowering kit. However I've got some rubbing in the front when I lock the wheel to either side or hit a bump rear hard in the front. Anyone have any reccmendations on how to resolve this? I'm thinking I might make a homemade somebody kit of some sort but wanted to hear ideas before I start tearing everything apart.
Thanks in advance
Attached Images
 
BrokenBowties is offline   Reply With Quote
Old 06-05-2018, 08:04 AM   #2
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 37,585
Re: Looking for advice

The burb looks nice. I myself am not familiar with any kits so I am not much help there. Maybe a smaller profile tire will clear.
__________________
Bill

1981 GMC High Sierra SWB Stepside

"Whitey" 2002 Chevy Silverado 1500 SWB W/T
Member of Louisiana Classic Truck Club (LCTC)
Board Vendors
Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
It's scary when you start making the same noises as your coffee maker.
Palf70Step is offline   Reply With Quote
Old 06-06-2018, 03:13 AM   #3
fredscarryall
Registered User
 
fredscarryall's Avatar
 
Join Date: Feb 2010
Location: gresham oregon
Posts: 763
Re: Looking for advice

With a 5 inch drop in the front. This kit is mostly designed for 17” and taller rims. If you have a 15” or 16” wheel ,your rim may be rubbing on the lower control arm. Or your tire may be rubbing on the inside of the fender opening lip. The tires look pretty tall. I had to roll a baseball bat under the fender lip on the inside. Between the tire and inside fender lips by pulling the car back and forth. It could be one or both. I had to do both. If both of these are ok. Turn your wheel full lock and shine a light and look for contact. Here’s a pic of were to look. Looks like someone used a cutting torch in the picture. A torch will melt the lower ball joint. I just used a hand cut off wheel and then a Hand grinder. Just don’t grind off to much
Attached Images
 
fredscarryall is offline   Reply With Quote
Old 06-06-2018, 09:02 AM   #4
Kudzupatch
Registered User
 
Kudzupatch's Avatar
 
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 499
Re: Looking for advice

I had the same issue when I bought my 93. Your front tires, assuming you are running a stock height tire are just too big and scrub on top of the fender wheels.

What I did was put 215/70 tires on the front. They are 2" smaller dia and very close in width to stock. Then I added 1" spacer under the front springs, lifting it 1". If you have a 2" drop spring you could go with a 1" drop spring instead. You end up with same ride height and it fixes all the rubbing issues.

Just save the front tires and put them on the rear when you wear out the ones on it now.

It got to the point I would just cringe when I saw a big bump in the road anticipating the scrubbing sound of the tire hitting the fender wells and I had to do something and came up with this. It's been 3+ years now and no issues what so ever. Plus I think the smaller tires look better on the front but that is personal opinion.


Last edited by Kudzupatch; 06-06-2018 at 06:03 PM.
Kudzupatch is offline   Reply With Quote
Old 06-07-2018, 01:45 PM   #5
Tom
driving is in my blood
 
Tom's Avatar
 
Join Date: Dec 1999
Location: Mesa AZ
Posts: 4,721
Re: Looking for advice

The passenger wheel well on my 98 has a bolt sticking into it that holds the airbox up in the engine bay. My tire would rub that bolt over bumps if I had a passenger in and was running 245/50/17's. 255/45/17's would not ever rub, but i liked the other profile better so I just removed the bolt. As for grinding when turning, that's your a-arms hitting the rim most likely.
__________________
-78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle.
-98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes.
-06 CBR600F4i: 110mph in 2nd at 14,000rpm= happiness.
-02 Suburban 4x4: stock
DISCLAIMER: I cant spell for the life of me.
Tom is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com