The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-17-2018, 03:23 AM   #1
Mr.Rogers
Registered User
 
Mr.Rogers's Avatar
 
Join Date: May 2013
Location: Phoenix, AZ
Posts: 12
Need Input on Suspension Choices - QA1 or RideTech

Hello All! So I m in the final stages of making my mind up on a suspension setup but could use some input. I have a 1978 2wd LWB C10 that currently has 1/2 ton springs in front and 3/4 ton leafs out back with ride assist air bags. After purchasing the truck I immediately put dropped shackles on it to level the ride height. I am nearing the start of my ls swap and want to address the suspension and braking (which I already have figured out).

I am on the fence about installing the RideTech Street Grip kit for the truck. Or I am considering going with QA1's new tubular control arms for standard shocks and springs not the coil over setup as they still offer up to a 7 degree gain in caster. The RideTech Street Grip kit is a complete system. If I go with the QA1 control arms my thoughts are to add a QA1 sway bar, RideTech HQ shocks, RideTech lowering springs, and CPP modular spindle. I would also replace the leaf spring bushings with poly, remove 4 or 5 leaf springs from the pack and have the remaining leaf springs dearched.

I should mention that the truck is gaining an LS3 and 4l80e. Although there is plenty of power on tap I am not building a drag or an auto cross truck. Just building something I can hop in and simply drive the wheels off of, be super comfortable in, and that handles well. Also not looking to have a truck that is laid out. Any input/feedback you all may have is greatly appreciated.
Mr.Rogers is offline   Reply With Quote
Old 05-18-2018, 09:31 AM   #2
68Stepbed
Living The Dream
 
68Stepbed's Avatar
 
Join Date: Mar 2005
Location: Sevierville,Tennessee
Posts: 5,262
Re: Need Input on Suspension Choices - QA1 or RideTech

I'd personally go with the RideTech setup. Do they offer the kit for leaf spring trucks?
__________________
Matt

68 C10 stepside, LS1/700R4, TCI Engineering suspension system
68Stepbed is offline   Reply With Quote
Old 06-12-2018, 04:37 PM   #3
C10punk
Registered User
 
Join Date: Nov 2017
Location: Niceville
Posts: 1
Re: Need Input on Suspension Choices - QA1 or RideTech

I would go with the Qa1 if you are looking for great handling with less work and a bit cheeper. The Qa1 the main difference is that u don't have to change the crossmembers.
C10punk is offline   Reply With Quote
Old 06-15-2018, 12:56 PM   #4
cruizin01
Active Member
 
Join Date: Mar 2016
Location: Cbus, Ohio
Posts: 192
Re: Need Input on Suspension Choices - QA1 or RideTech

I was real happy with the street grip kit on my build. I don't have it on the road yet but the height and quality and support was all very good.
__________________
'78 C10 Build
cruizin01 is offline   Reply With Quote
Reply

Bookmarks

Tags
lwb, qa1, ridetech, streetgrip, suspension

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com