The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 Chevy & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-18-2018, 05:30 PM   #1
livermorek5
Registered User
 
Join Date: Feb 2014
Location: Livermore, Ca
Posts: 4
1995 K1500 With 2004 Column and ls5.3 help?

I picked up this project a few weeks ago but I'm having a hard time finding anyone who has installed the 04 column in a 95 truck. Who ever did the install pretty much stopped at getting the engine running and left the lighting a mess. I could really use a pinout of the large column plug on the 95. I Have some wire diagrams but trying to find all the circuits associated with the column is beyond my hobbyist abilities.


Also any info on the wires coming from the 2004 column.

Last edited by livermorek5; 05-18-2018 at 05:59 PM.
livermorek5 is offline   Reply With Quote
Old 05-18-2018, 06:00 PM   #2
livermorek5
Registered User
 
Join Date: Feb 2014
Location: Livermore, Ca
Posts: 4
Re: 1995 K1500 With 2004 Column and ls5.3 help?



Here's a pic of the plug un-plugged its 3 pieces.
livermorek5 is offline   Reply With Quote
Old 05-18-2018, 11:49 PM   #3
Mr_Rich
Registered User
 
Mr_Rich's Avatar
 
Join Date: May 2006
Location: Santa Maria, Calif.
Posts: 480
Re: 1995 K1500 With 2004 Column and ls5.3 help?

I kind a think you have a square peg in a round hole situation. It looks like you have an OBDI diag plug just below the column and the column is OBDII. I don't see how that's going to work. You need more of the 5.3L wiring to get past this spot from what it appears to me. I haven't done this kind of transplant but I would do a lot more research at this point before going any further.
__________________
1989 K1500 Chev. EC
Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit.
2009 Hummer H3T 3.7L 5M.
1997 K2500 Chev. EC 7.4L/ 4L80E
Mr_Rich is offline   Reply With Quote
Old 05-19-2018, 12:11 AM   #4
livermorek5
Registered User
 
Join Date: Feb 2014
Location: Livermore, Ca
Posts: 4
Re: 1995 K1500 With 2004 Column and ls5.3 help?

I was at work when I posted this. The two pictures are not my truck. My truck has both obd1 and 2 diag. ports. The problem I have is not with any of the engine controls. Its only with the exterior lighting. After more research I'm thinking I need to add the 04 body control module or just try and make a 95 multifunction turn signal switch work on a 04 column.
livermorek5 is offline   Reply With Quote
Old 05-19-2018, 08:20 PM   #5
livermorek5
Registered User
 
Join Date: Feb 2014
Location: Livermore, Ca
Posts: 4
Re: 1995 K1500 With 2004 Column and ls5.3 help?

A pin out of the plug would still be nice to have, but I solved all my exterior lighting issues by swapping out the 2004 multifunction turn signal switch with a 1995 version. Bolted right in amazingly just had to trim the column cover a lil bit.
livermorek5 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com