You guessed it, 1950 s10 swap. - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steve aleve · 09-04-2014, 11:33 PM

That's all great info. Thanks guys!!! I know the truck intake will provide more power but I ended up snagging an ls1 intake, rails and injectors. I'm not overly worried about horsepower and part of the reason I went with an ls is cause I love the look of the ls1 with the rail covers in a truck like this. I have an l98 350 supercharged that I decided not to use in lieu of the ls. I can already see the dollar signs add up but it will be exactly what I wanted. All rambling aside, I wanted to know what you did for your steam lines and did you use the truck throttle body? Now I've gotta keep my eyes out for a 4l60e trans. All of the newer silverados and sierras are stripped to the bones within minutes of hitting the yard and I'm too ignorant to know what other vehicles have the same trans (able to use with no mods). Any thoughts or ideas would be much appreciated!!! Thanks again and this thread is my motivation.

dirtybirdindian · 09-09-2014, 12:19 AM

Quote:

Originally Posted by Layedoutsonoma91

Updates!!!

How wide are those whitewalls?

Layedoutsonoma91 · 09-09-2014, 01:00 AM

I used the truck throttle body. The steam ports i ran a line to the waterpump spacers i used. I tapped the spacer.

The white walls are 2 inches i think

tattooedblue · 09-09-2014, 07:32 AM

Looks Awesome!!

Layedoutsonoma91 · 09-14-2014, 08:59 PM

Thank guys. Havent been working on it layely been so busy. More updates soon

chuckmc8 · 09-17-2014, 05:49 AM

Subbin in for this awesome build

steve aleve · 09-21-2014, 12:19 AM

Dude I don't know where I would be without your build. So I got the block back together and the ls1 intake in and it's looking like the fuel rail is going to hit the coil pack on the drivers side. Did you run into this?

Root2812 · 09-21-2014, 12:24 AM

Quote:

Originally Posted by steve aleve

Dude I don't know where I would be without your build. So I got the block back together and the ls1 intake in and it's looking like the fuel rail is going to hit the coil pack on the drivers side. Did you run into this?

Truck coil packs and ls1 fuel rails? You will run into that. Just lightly bend the fuel rail nipple up to clear the coil pack. Its a simple fix and commonly done over on ls1tech.com

steve aleve · 09-21-2014, 01:29 AM

Awesome thanks!!!! I guess I should spend a little more time over at the ls1tech forums. Thanks again

Layedoutsonoma91 · 09-22-2014, 01:31 PM

I had to bend the fuel rail up a little. No big deal just dont kink it.

whiteheadcycle · 10-10-2014, 12:13 AM

Great looking truck! I would change a thing. Just curious if you could give me a lenght of your lower 4-link arms (center of axle tube to center of front mounting bolt. I'm trying to rap-up my suspension work while in the proses of getting the title for my 55 1st ser. I don't want to tear the body off untill I have that title in my hand. Also what backspacing are you running front and rear on your wheels?

tlorber · 10-10-2014, 12:17 PM

Layedout,
Can I please get some specs on the steering column you used? Brand, length etc.
Your headers look like the same ones I bought, so I figure if your linkage clears, I should copy it. Did you move the steering hole in the firewall from the stock location?

Thanks for any input you can supply.

**Advanced Design** · 10-10-2014, 06:52 PM

Awesome truck and great job on the build! Thanks for sharing it.

Layedoutsonoma91 · 10-10-2014, 06:58 PM

Quote:

Originally Posted by whiteheadcycle

Great looking truck! I would change a thing. Just curious if you could give me a lenght of your lower 4-link arms (center of axle tube to center of front mounting bolt. I'm trying to rap-up my suspension work while in the proses of getting the title for my 55 1st ser. I don't want to tear the body off untill I have that title in my hand. Also what backspacing are you running front and rear on your wheels?

The lower link bars are roughly 21.5 inches center hole to center axle. They are adjustable ends tho and can be changed. I also moved my front leaf spring perch back about 5 inches. Not sure on my back spacing 15x7 with s10 back spacing. I have spacers on front and 4x4 rear end.

Layedoutsonoma91 · 10-10-2014, 07:01 PM

Quote:

Originally Posted by tlorber

Layedout,
Can I please get some specs on the steering column you used? Brand, length etc.
Your headers look like the same ones I bought, so I figure if your linkage clears, I should copy it. Did you move the steering hole in the firewall from the stock location?

Thanks for any input you can supply.

The steering column is an ebay one. I have no clue on how long it was. I think it was 46"?? Dont quote me tho. I moved the firewall hole down where it was in the floor part more. None of it in the wall portion. Also moved it over about an inch to the driver side to clear the headers better. I had to buy a couple joints and fab the linkage to make a turn around the headers anyway.

whiteheadcycle · 10-10-2014, 07:33 PM

Quote:

Originally Posted by Layedoutsonoma91

The lower link bars are roughly 21.5 inches center hole to center axle. They are adjustable ends tho and can be changed. I also moved my front leaf spring perch back about 5 inches. Not sure on my back spacing 15x7 with s10 back spacing. I have spacers on front and 4x4 rear end.

Thanks for the info! Are you still using the small tank (13.3gal) that came with the s10 or did you move up to the 18gal tanks? Also what setup did you use for the fuel pump?

tlorber · 10-11-2014, 10:59 AM

Ok, thanks for the reply.

Layedoutsonoma91 · 10-19-2014, 11:21 AM

Still using the stock s10 tank. The transmission took a dump on me. On the search for a rebuilt 4l60e now....

99 to Life · 10-19-2014, 11:40 AM

sorry to hear about the trans. are you running a standalone harness for the trans?

Layedoutsonoma91 · 10-19-2014, 11:45 AM

Im using the stock harness for everything

99 to Life · 10-19-2014, 11:51 AM

right on, so with that are you only able to run the 60e? could you run an 80e?

Layedoutsonoma91 · 10-19-2014, 12:12 PM

To use a 4l80e i would have to change the harness. Also the yoke is different and i would have to remake the trans crossmember. Then i would have to buy a shifter. Mine wouldnt go over a 4l80

99 to Life · 10-19-2014, 09:51 PM

cool, good to know. haven't dove into that info yet.

mr incredible · 10-31-2014, 07:32 PM

find your trans yet

pigpin · 11-21-2014, 08:18 AM

Looks great. I'm just getting started on my '51. What size are the tires?

09-04-2014, 11:33 PM	#151
steve aleve Registered User Join Date: Nov 2012 Location: Albuquerque New Mexico Posts: 187	Re: You guessed it, 1950 s10 swap. That's all great info. Thanks guys!!! I know the truck intake will provide more power but I ended up snagging an ls1 intake, rails and injectors. I'm not overly worried about horsepower and part of the reason I went with an ls is cause I love the look of the ls1 with the rail covers in a truck like this. I have an l98 350 supercharged that I decided not to use in lieu of the ls. I can already see the dollar signs add up but it will be exactly what I wanted. All rambling aside, I wanted to know what you did for your steam lines and did you use the truck throttle body? Now I've gotta keep my eyes out for a 4l60e trans. All of the newer silverados and sierras are stripped to the bones within minutes of hitting the yard and I'm too ignorant to know what other vehicles have the same trans (able to use with no mods). Any thoughts or ideas would be much appreciated!!! Thanks again and this thread is my motivation.

09-09-2014, 01:00 AM	#153
Layedoutsonoma91 Registered User Join Date: Mar 2011 Location: Birmingham, AL Posts: 290	Re: You guessed it, 1950 s10 swap. I used the truck throttle body. The steam ports i ran a line to the waterpump spacers i used. I tapped the spacer. The white walls are 2 inches i think __________________ 1954 Chevy 3100 5 window, bagged on s10 frame, 6.0 ls swap/4l80e Past build thread http://67-72chevytrucks.com/vboard/s...=531261&page=3 1949 3100 s10 swap 5.3. Instagram -@thejcates

09-09-2014, 07:32 AM	#154
tattooedblue Registered User Join Date: Jun 2014 Location: Wilmington NC Posts: 48	Re: You guessed it, 1950 s10 swap. Looks Awesome!!

09-14-2014, 08:59 PM	#155
Layedoutsonoma91 Registered User Join Date: Mar 2011 Location: Birmingham, AL Posts: 290	Re: You guessed it, 1950 s10 swap. Thank guys. Havent been working on it layely been so busy. More updates soon __________________ 1954 Chevy 3100 5 window, bagged on s10 frame, 6.0 ls swap/4l80e Past build thread http://67-72chevytrucks.com/vboard/s...=531261&page=3 1949 3100 s10 swap 5.3. Instagram -@thejcates

09-17-2014, 05:49 AM	#156
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: You guessed it, 1950 s10 swap. Subbin in for this awesome build __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-21-2014, 12:19 AM	#157
steve aleve Registered User Join Date: Nov 2012 Location: Albuquerque New Mexico Posts: 187	Re: You guessed it, 1950 s10 swap. Dude I don't know where I would be without your build. So I got the block back together and the ls1 intake in and it's looking like the fuel rail is going to hit the coil pack on the drivers side. Did you run into this?

09-21-2014, 01:29 AM	#159
steve aleve Registered User Join Date: Nov 2012 Location: Albuquerque New Mexico Posts: 187	Re: You guessed it, 1950 s10 swap. Awesome thanks!!!! I guess I should spend a little more time over at the ls1tech forums. Thanks again

09-22-2014, 01:31 PM	#160
Layedoutsonoma91 Registered User Join Date: Mar 2011 Location: Birmingham, AL Posts: 290	Re: You guessed it, 1950 s10 swap. I had to bend the fuel rail up a little. No big deal just dont kink it. __________________ 1954 Chevy 3100 5 window, bagged on s10 frame, 6.0 ls swap/4l80e Past build thread http://67-72chevytrucks.com/vboard/s...=531261&page=3 1949 3100 s10 swap 5.3. Instagram -@thejcates

10-10-2014, 12:13 AM	#161
whiteheadcycle Registered User Join Date: Oct 2009 Location: san jose ca Posts: 108	Re: You guessed it, 1950 s10 swap. Great looking truck! I would change a thing. Just curious if you could give me a lenght of your lower 4-link arms (center of axle tube to center of front mounting bolt. I'm trying to rap-up my suspension work while in the proses of getting the title for my 55 1st ser. I don't want to tear the body off untill I have that title in my hand. Also what backspacing are you running front and rear on your wheels?

10-10-2014, 12:17 PM	#162
tlorber Registered User Join Date: Nov 2013 Location: Los Angeles Posts: 236	Re: You guessed it, 1950 s10 swap. Layedout, Can I please get some specs on the steering column you used? Brand, length etc. Your headers look like the same ones I bought, so I figure if your linkage clears, I should copy it. Did you move the steering hole in the firewall from the stock location? Thanks for any input you can supply. __________________ http://67-72chevytrucks.com/vboard/s...s10+frame+swap

10-10-2014, 06:52 PM	#163
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: You guessed it, 1950 s10 swap. Awesome truck and great job on the build! Thanks for sharing it. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

10-11-2014, 10:59 AM	#167
tlorber Registered User Join Date: Nov 2013 Location: Los Angeles Posts: 236	Re: You guessed it, 1950 s10 swap. Ok, thanks for the reply. __________________ http://67-72chevytrucks.com/vboard/s...s10+frame+swap

10-19-2014, 11:21 AM	#168
Layedoutsonoma91 Registered User Join Date: Mar 2011 Location: Birmingham, AL Posts: 290	Re: You guessed it, 1950 s10 swap. Still using the stock s10 tank. The transmission took a dump on me. On the search for a rebuilt 4l60e now.... __________________ 1954 Chevy 3100 5 window, bagged on s10 frame, 6.0 ls swap/4l80e Past build thread http://67-72chevytrucks.com/vboard/s...=531261&page=3 1949 3100 s10 swap 5.3. Instagram -@thejcates

10-19-2014, 11:40 AM	#169
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: You guessed it, 1950 s10 swap. sorry to hear about the trans. are you running a standalone harness for the trans? __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

10-19-2014, 11:45 AM	#170
Layedoutsonoma91 Registered User Join Date: Mar 2011 Location: Birmingham, AL Posts: 290	Re: You guessed it, 1950 s10 swap. Im using the stock harness for everything __________________ 1954 Chevy 3100 5 window, bagged on s10 frame, 6.0 ls swap/4l80e Past build thread http://67-72chevytrucks.com/vboard/s...=531261&page=3 1949 3100 s10 swap 5.3. Instagram -@thejcates



Register or Log In To remove these advertisements.

10-19-2014, 11:51 AM	#171
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: You guessed it, 1950 s10 swap. right on, so with that are you only able to run the 60e? could you run an 80e? __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

10-19-2014, 12:12 PM	#172
Layedoutsonoma91 Registered User Join Date: Mar 2011 Location: Birmingham, AL Posts: 290	Re: You guessed it, 1950 s10 swap. To use a 4l80e i would have to change the harness. Also the yoke is different and i would have to remake the trans crossmember. Then i would have to buy a shifter. Mine wouldnt go over a 4l80 __________________ 1954 Chevy 3100 5 window, bagged on s10 frame, 6.0 ls swap/4l80e Past build thread http://67-72chevytrucks.com/vboard/s...=531261&page=3 1949 3100 s10 swap 5.3. Instagram -@thejcates

10-19-2014, 09:51 PM	#173
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: You guessed it, 1950 s10 swap. cool, good to know. haven't dove into that info yet. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

10-31-2014, 07:32 PM	#174
mr incredible Registered User Join Date: Jun 2013 Location: mchenry ill Posts: 55	Re: You guessed it, 1950 s10 swap. find your trans yet __________________ USN RETIRED there are two things you don't need in the navy. that's a wife and a pick up truck. cause when your out to sea someone else is using them

11-21-2014, 08:18 AM	#175
pigpin Registered User Join Date: Sep 2014 Location: Auburn IN Posts: 34	Re: You guessed it, 1950 s10 swap. Looks great. I'm just getting started on my '51. What size are the tires?

Register or Log In To remove these advertisements.