Small drops on 3/4 - 1 tons? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

w00dst0ck · 10-10-2017, 02:13 PM

Wanting to do a small drop on my 3+3. The only threads I'm finding are 5/7-6/8 etc.

Anyone have a smaller drop with some insight on how it rides? Also whats a decent setup to go with?

I don't want to have to cut the bed, remove inner fenders or c notch the frame.

**mongocanfly** · 10-10-2017, 02:54 PM

yep...I looked into dropping my c30 once but I didn't want to much...all the stuff I found is like you described. ..the easiest way to do a small drop would be start cutting coils on the front and pulling leaves out back...and best of all its free..except for your labor...
I think the smallest drop spindle I could find was 3"...I was looking for 2" drop

w00dst0ck · 10-10-2017, 03:35 PM

Yeah. I was honestly looking for a 2.5. My c30 has a 12v cummins, so the front end is already somewhat low.

I don't really want to cut springs or pull leafs.

I'm thinking of just doing the 3" drop spindles and Western Chassis makes a 4" drop leaf pack, I'm just wondering if their leafs are still stiff enough to haul with.

I already have both bagged and static dropped trucks, and I really want to keep the nice smooth ride that this one has for a DD.

DieselSJ · 10-10-2017, 03:44 PM

Look over in the suspension forums. One of the vendors has a heavy duty link kit for the rear that uses airbags and you can install it to run at stock height. I'm going to do this to my dually as soon as I get a couple other projects cleared out.

Here - http://67-72chevytrucks.com/vboard/s...d.php?t=669016

daddyjeep · 10-11-2017, 12:15 PM

Quote:

Originally Posted by DieselSJ

Look over in the suspension forums. One of the vendors has a heavy duty link kit for the rear that uses airbags and you can install it to run at stock height. I'm going to do this to my dually as soon as I get a couple other projects cleared out.

Here - http://67-72chevytrucks.com/vboard/s...d.php?t=669016

That is what I was going to suggest. Some day I would like to run air ride all the way around on my K30 just for the ride quality.

**kwmech** · 10-11-2017, 12:24 PM

A lowered 3+3 in Texas? is that legal?

SCOTI · 10-12-2017, 01:52 PM

Quote:

Originally Posted by kwmech

A lowered 3+3 in Texas? is that legal?

Yes.....

w00dst0ck · 10-12-2017, 03:28 PM

Quote:

Originally Posted by SCOTI

Yes.....

Details on your setup and how it rides?

**kwmech** · 10-12-2017, 08:00 PM

Quote:

Originally Posted by SCOTI

Yes.....

That was kind of a tounge-in-cheek question

w00dst0ck · 10-11-2017, 01:45 PM

Quote:

Originally Posted by DieselSJ

Look over in the suspension forums. One of the vendors has a heavy duty link kit for the rear that uses airbags and you can install it to run at stock height. I'm going to do this to my dually as soon as I get a couple other projects cleared out.

Here - http://67-72chevytrucks.com/vboard/s...d.php?t=669016

I really don't want another bagged truck at the moment. Plus, that kit looks like $3-4k

There has to be a relatively inexpensive and good setup for around ~800-1k

DieselSJ · 10-11-2017, 07:34 PM

Quote:

Originally Posted by w00dst0ck

I really don't want another bagged truck at the moment. Plus, that kit looks like $3-4k

There has to be a relatively inexpensive and good setup for around ~800-1k

Looks like $3-4K, but it is not. It is $1500.

http://www.ridetech.com/products/uni...es_hash=15-553

Super_Dave · 10-12-2017, 01:09 AM

Western Chassis 2.5" Drop Spindles for C20. . . $399 (have seen them for less.)
https://www.performanceonline.com/71...e-2-half-inch/

Add some lowering shackles in the back. . . you have a package for around $500.

w00dst0ck · 10-12-2017, 03:28 PM

Quote:

Originally Posted by Super_Dave

Western Chassis 2.5" Drop Spindles for C20. . . $399 (have seen them for less.)
https://www.performanceonline.com/71...e-2-half-inch/

Add some lowering shackles in the back. . . you have a package for around $500.

c20/30's share the same balljoints and tie rod ends?

w00dst0ck · 10-12-2017, 07:52 PM

It's linked near the top. POL. Not sure who actually makes them though.

https://www.performanceonline.com/71...e-2-half-inch/

w00dst0ck · 10-12-2017, 10:40 PM

Just noticed that the 3/4 ton and 1 ton spindles are different, so that 2.5" probably wouldn't work. I still need to measure, just worried that 3" with this heavy motor is going to be too much.

SCOTI · 10-12-2017, 11:45 PM

3

Quote:

Originally Posted by w00dst0ck

Just noticed that the 3/4 ton and 1 ton spindles are different, so that 2.5" probably wouldn't work. I still need to measure, just worried that 3" with this heavy motor is going to be too much.

I'll do more research but never saw different spindles for the 20/30. BJ are the same. Don't know about tie rods though.

w00dst0ck · 10-13-2017, 07:03 PM

http://www.bcfab.com/McGaughys-254-L...les_p_882.html

Found this. 2.5/4 drop.

Did the c30's come with both 1" and 1.25" rotors. It's asking if it's an HD or LD.

wahl4m · 10-14-2017, 07:56 AM

that kit is neat -probably do it on my 39 international school bus ! would rather have a air kit for better ride ?? BUT ?? the kit is priced right !!if anybody has installed one ?please post some info on it !! thanks mike

Matt Man · 10-14-2017, 12:40 PM

This was my 86 dually, had western chassis 3" drop spindles in the front and some leafs springs removed in the back and drop shackles which was about a 4" drop. So 3/4 drop.

SCOTI · 10-14-2017, 01:27 PM

Quote:

Originally Posted by w00dst0ck

http://www.bcfab.com/McGaughys-254-L...les_p_882.html

Found this. 2.5/4 drop.

Did the c30's come with both 1" and 1.25" rotors. It's asking if it's an HD or LD.

3/4 ton 88-98 OBS style trucks came in 2 versions (LD=6-lug; HD=8-lug).
1-ton trucks are all HD 8-lug set-ups.

The spindles shown in that ad are for '99 & later style trucks (exceptions are the 3/4 & 1-ton CC's since they remained OBS).

These are the 'kits' for square body trucks:

https://westernchassisinc.com/1973-9...-Front-5-Rear/
https://westernchassisinc.com/1973-9...-Front-5-Rear/
https://westernchassisinc.com/1973-9...-Front-7-Rear/

SCOTI · 10-14-2017, 01:49 PM

Well, the web site add when you copy/paste it is not correct.

They offer 2/4; 3/5; 5/7; & 6/8 drops for square body trucks. The 2/4 would be using front drop springs. The 3/5 through 6/8 utilize their spindles which are 3" drop or the spindles & a drop spring combo.

tucsonjwt · 10-17-2017, 10:34 PM

If you just want a small drop, try smaller tires on the stock rims.

SCOTI · 10-18-2017, 10:37 AM

Quote:

Originally Posted by tucsonjwt

If you just want a small drop, try smaller tires on the stock rims.

If this is the answer, just leave it alone. Please.....

10-10-2017, 02:13 PM	#1
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Small drops on 3/4 - 1 tons? Wanting to do a small drop on my 3+3. The only threads I'm finding are 5/7-6/8 etc. Anyone have a smaller drop with some insight on how it rides? Also whats a decent setup to go with? I don't want to have to cut the bed, remove inner fenders or c notch the frame.

10-10-2017, 02:54 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,585	Re: Small drops on 3/4 - 1 tons? yep...I looked into dropping my c30 once but I didn't want to much...all the stuff I found is like you described. ..the easiest way to do a small drop would be start cutting coils on the front and pulling leaves out back...and best of all its free..except for your labor... I think the smallest drop spindle I could find was 3"...I was looking for 2" drop

10-10-2017, 03:35 PM	#3
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Small drops on 3/4 - 1 tons? Yeah. I was honestly looking for a 2.5. My c30 has a 12v cummins, so the front end is already somewhat low. I don't really want to cut springs or pull leafs. I'm thinking of just doing the 3" drop spindles and Western Chassis makes a 4" drop leaf pack, I'm just wondering if their leafs are still stiff enough to haul with. I already have both bagged and static dropped trucks, and I really want to keep the nice smooth ride that this one has for a DD.

10-10-2017, 03:44 PM	#4
DieselSJ Registered User Join Date: Jun 2016 Location: Phoenix, AZ Posts: 574	Re: Small drops on 3/4 - 1 tons? Look over in the suspension forums. One of the vendors has a heavy duty link kit for the rear that uses airbags and you can install it to run at stock height. I'm going to do this to my dually as soon as I get a couple other projects cleared out. Here - http://67-72chevytrucks.com/vboard/s...d.php?t=669016 __________________ 87 R30 CC Dually, TBI 454, NV4500, zero rust barn find 87 Jeep Grand Wagoneer, 6.5 turbodiesel, 700R4

10-11-2017, 12:24 PM	#6
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,389	Re: Small drops on 3/4 - 1 tons? A lowered 3+3 in Texas? is that legal?

10-12-2017, 01:09 AM	#12
Super_Dave Registered User Join Date: Jul 2014 Location: Sherwood, Oregon Posts: 974	Re: Small drops on 3/4 - 1 tons? Western Chassis 2.5" Drop Spindles for C20. . . $399 (have seen them for less.) https://www.performanceonline.com/71...e-2-half-inch/ Add some lowering shackles in the back. . . you have a package for around $500. __________________ --Project BABA YAGA!... http://67-72chevytrucks.com/vboard/s...d.php?t=655783 --Project BABA YAGA!... http://67-72chevytrucks.com/vboard/s...ghlight=Belair "Life is tough - wear a cup!" "Old Enough to Know Better - Too Young to Resist" "Junk is something you will need three weeks after you throw it away."

10-12-2017, 07:52 PM	#14
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Small drops on 3/4 - 1 tons? It's linked near the top. POL. Not sure who actually makes them though. https://www.performanceonline.com/71...e-2-half-inch/

10-12-2017, 10:40 PM	#15
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Small drops on 3/4 - 1 tons? Just noticed that the 3/4 ton and 1 ton spindles are different, so that 2.5" probably wouldn't work. I still need to measure, just worried that 3" with this heavy motor is going to be too much.

10-13-2017, 07:03 PM	#17
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Small drops on 3/4 - 1 tons? http://www.bcfab.com/McGaughys-254-L...les_p_882.html Found this. 2.5/4 drop. Did the c30's come with both 1" and 1.25" rotors. It's asking if it's an HD or LD. Last edited by w00dst0ck; 10-13-2017 at 07:12 PM.

10-14-2017, 07:56 AM	#18
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: Small drops on 3/4 - 1 tons? that kit is neat -probably do it on my 39 international school bus ! would rather have a air kit for better ride ?? BUT ?? the kit is priced right !!if anybody has installed one ?please post some info on it !! thanks mike

10-14-2017, 12:40 PM	#19
Matt Man Registered User Join Date: Oct 2009 Location: Buhl, Idaho Posts: 1,438	Re: Small drops on 3/4 - 1 tons? This was my 86 dually, had western chassis 3" drop spindles in the front and some leafs springs removed in the back and drop shackles which was about a 4" drop. So 3/4 drop. __________________ 86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903

10-14-2017, 01:49 PM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	Re: Small drops on 3/4 - 1 tons? Well, the web site add when you copy/paste it is not correct. They offer 2/4; 3/5; 5/7; & 6/8 drops for square body trucks. The 2/4 would be using front drop springs. The 3/5 through 6/8 utilize their spindles which are 3" drop or the spindles & a drop spring combo. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-17-2017, 10:34 PM	#22
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,188	Re: Small drops on 3/4 - 1 tons? If you just want a small drop, try smaller tires on the stock rims.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.