The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > S10 S15 Luv Blazer

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-17-2018, 02:18 PM   #1
Mr_Rich
Registered User
 
Mr_Rich's Avatar
 
Join Date: May 2006
Location: Santa Maria, Calif.
Posts: 781
S-10/ Blazer rear rotors

Does anyone have the dimensions on the rear rotors for the late '90's Blazers? I have a set of rotors that were part of a Baer Brakes kit for a full-size truck that they put together. Yeah, I know, two different vehicles, but supposedly this kit was put together with those particular rotors and I want to verify that fact. I used a different kit on my K1500 and I've had this one on the shelf. It's time to sell the parts and I need to identify them. (These were five lug rotors also...)
__________________
1989 K1500 Chev. EC
Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit.
2009 Hummer H3T 3.7L 5M (sold)
1997 K2500 Chev. EC 7.4L/ 4L80E
2018 Dodge Ram 2500 HD R/C
Mr_Rich is offline   Reply With Quote
Old 09-17-2018, 09:35 PM   #2
Mr_Rich
Registered User
 
Mr_Rich's Avatar
 
Join Date: May 2006
Location: Santa Maria, Calif.
Posts: 781
Re: S-10/ Blazer rear rotors

I took pics of these rotors I have. They are 11 5/8" or 295mm in dia. Thickness is 20mm and the height of the hat is 60mm. Depth of the hat is 54mm. The lug holes were drilled by Baer.
Attached Images
  
__________________
1989 K1500 Chev. EC
Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit.
2009 Hummer H3T 3.7L 5M (sold)
1997 K2500 Chev. EC 7.4L/ 4L80E
2018 Dodge Ram 2500 HD R/C
Mr_Rich is offline   Reply With Quote
Old 09-17-2018, 09:38 PM   #3
Mr_Rich
Registered User
 
Mr_Rich's Avatar
 
Join Date: May 2006
Location: Santa Maria, Calif.
Posts: 781
Re: S-10/ Blazer rear rotors

These may also fit '94-'96 Chevrolet Impalas (?).
__________________
1989 K1500 Chev. EC
Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit.
2009 Hummer H3T 3.7L 5M (sold)
1997 K2500 Chev. EC 7.4L/ 4L80E
2018 Dodge Ram 2500 HD R/C
Mr_Rich is offline   Reply With Quote
Old 09-19-2018, 08:46 AM   #4
95 S_Trucker
Registered User
 
95 S_Trucker's Avatar
 
Join Date: Oct 2009
Location: .
Posts: 2,178
Re: S-10/ Blazer rear rotors

Disc brakes came out in 98 for the blazer. 97 and earlier were drum.

98-05 2wd rear rotor: 296mm diameter, 20,mm thick, 72.8mm total height(so the hat would be 62.8mm tall)

98-05 4wd rear rotor: 295 mm diameter, 20mm thick, 95.3 mm total height(so the hat would be 75.3 mm tall)

From the measurements you gave, they are close, but not a direct fit for a blazer.




94-96 Impala SS rear rotor: 295mm diameter, 20mm thick, 59.1 total height(so the hat would be 39.1mm)

That's not a direct fit either
95 S_Trucker is offline   Reply With Quote
Old 09-19-2018, 12:47 PM   #5
Mr_Rich
Registered User
 
Mr_Rich's Avatar
 
Join Date: May 2006
Location: Santa Maria, Calif.
Posts: 781
Re: S-10/ Blazer rear rotors

Quote:
Originally Posted by 95 S_Trucker View Post
Disc brakes came out in 98 for the blazer. 97 and earlier were drum.

98-05 2wd rear rotor: 296mm diameter, 20,mm thick, 72.8mm total height(so the hat would be 62.8mm tall)

98-05 4wd rear rotor: 295 mm diameter, 20mm thick, 95.3 mm total height(so the hat would be 75.3 mm tall)

From the measurements you gave, they are close, but not a direct fit for a blazer.




94-96 Impala SS rear rotor: 295mm diameter, 20mm thick, 59.1 total height(so the hat would be 39.1mm)

That's not a direct fit either

Thanks for that info. I think I "ballparked" that height measurement and I need to take that measurement again on a flat surface with my digital caliper.
__________________
1989 K1500 Chev. EC
Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit.
2009 Hummer H3T 3.7L 5M (sold)
1997 K2500 Chev. EC 7.4L/ 4L80E
2018 Dodge Ram 2500 HD R/C
Mr_Rich is offline   Reply With Quote
Old 09-20-2018, 04:18 AM   #6
Mr_Rich
Registered User
 
Mr_Rich's Avatar
 
Join Date: May 2006
Location: Santa Maria, Calif.
Posts: 781
Re: S-10/ Blazer rear rotors

I think these are Impala rear disk rotors. Total height is approx. 60mm and thickness of the rotor is 20mm (39.1mm + 20mm). That math is close enough for me.
__________________
1989 K1500 Chev. EC
Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit.
2009 Hummer H3T 3.7L 5M (sold)
1997 K2500 Chev. EC 7.4L/ 4L80E
2018 Dodge Ram 2500 HD R/C
Mr_Rich is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com