Roushinator's 72 C10 Stepside Restore/Build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 06-22-2013, 09:31 AM

Nice !

**roushinator** · 06-28-2013, 08:29 PM

Body Work has started.....

oilyrag80 · 06-28-2013, 09:09 PM

Lookin good man!

**roushinator** · 07-02-2013, 03:15 PM

Got some sanding done today. Ran out of sanding disks.

**roushinator** · 07-08-2013, 04:18 PM

Drivers side fender...

Two hours of sanding later....

Some damage up front...

Some damage in the back...

**roushinator** · 07-08-2013, 04:21 PM

A little work done on the cab too....

**roushinator** · 09-23-2013, 08:38 AM

Here is my new tank.Since i went fuel injection i decided to switch tanks. It is a Boyds welding tank. The quality is amazing. As the weather cools down there will be a lot of progress.

**roushinator** · 09-30-2013, 10:07 AM

I guess it has been a while since the last update...

The cab finally got primed this weekend. Now i can start Body work.

Oh and i picked up this timing cover.

**roushinator** · 10-16-2013, 03:50 PM

A little work left to do on the underside and i can mount the cab back onto the frame.

**roushinator** · 11-18-2013, 09:04 AM

Got a little work done this weekend....

**67cheby** · 11-18-2013, 02:18 PM

looking good !

**roushinator** · 11-20-2013, 09:20 AM

Got the new doors on. I will have to adjust it more to get them to open perfectly. The body lines match up nicely.

**GAc10boy** · 11-20-2013, 06:40 PM

Looking great!

In The Ten Ring · 04-23-2014, 06:14 AM

Say,

Those car (wheel/tire) dollies I see your project sitting on, are those the 1,000 pounders from Harbor Freight?

orngsikL · 05-01-2014, 03:07 AM

nice build. im in baton rouge / denham springs also. You don't happen to live in springlake /fairhill do you?

**roushinator** · 06-22-2014, 10:07 PM

Working like crazy but picked this up a few weeks ago.

This bed is 100 times better than mine. Still I am going to use a few pieces off of mine to make It better. Good thing about this deal was that I already has a good wood bed and came with a new rear bumper and rear sliding window.

**roushinator** · 06-22-2014, 10:08 PM

Got some work done today. Ready for blasting and Primer.

**roushinator** · 02-04-2015, 10:41 AM

Here are my goodies that came in....

And here it is Powder Coated..

**roushinator** · 02-04-2015, 10:43 AM

Ditched the rebuild effort on the old motor.

2014 Camaro SS 6.2L with 6 Speed Auto. 196 miles.

But.... i dont think the porter-built inner frame stiffner will work with my new motor/trans that i just got....

Justin@EntropyRad · 02-04-2015, 01:29 PM

Serious gear in that thing!

**Hart_Rod** · 02-19-2015, 11:21 AM

Nice build!

**roushinator** · 02-19-2015, 06:06 PM

Quote:

Originally Posted by Hart_Rod

Nice build!

Thanks!

Picked up some nice motor mount plates...

Headers came in....

Xeen · 02-19-2015, 06:23 PM

That Camaro motor is wicked, your truck just went to bad to the bone status.

Brannon yazell · 02-19-2015, 06:30 PM

Nice...

knomadd · 02-26-2015, 04:29 PM

Nice! I'm late, but will be watching. Carry on!

06-22-2013, 09:31 AM	#101
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Roushinator's 72 C10 Stepside Restore/Build Nice ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-28-2013, 08:29 PM	#102
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Body Work has started..... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

06-28-2013, 09:09 PM	#103
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Roushinator's 72 C10 Stepside Restore/Build Lookin good man!

07-02-2013, 03:15 PM	#104
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Got some sanding done today. Ran out of sanding disks. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

07-08-2013, 04:18 PM	#105
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Drivers side fender... Two hours of sanding later.... Some damage up front... Some damage in the back... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

07-08-2013, 04:21 PM	#106
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build A little work done on the cab too.... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

09-23-2013, 08:38 AM	#107
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Here is my new tank.Since i went fuel injection i decided to switch tanks. It is a Boyds welding tank. The quality is amazing. As the weather cools down there will be a lot of progress. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

09-30-2013, 10:07 AM	#108
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build I guess it has been a while since the last update... The cab finally got primed this weekend. Now i can start Body work. Oh and i picked up this timing cover. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

10-16-2013, 03:50 PM	#109
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build A little work left to do on the underside and i can mount the cab back onto the frame. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

11-18-2013, 09:04 AM	#110
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Got a little work done this weekend.... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

11-18-2013, 02:18 PM	#111
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Roushinator's 72 C10 Stepside Restore/Build looking good ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-20-2013, 09:20 AM	#112
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Got the new doors on. I will have to adjust it more to get them to open perfectly. The body lines match up nicely. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

11-20-2013, 06:40 PM	#113
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: Roushinator's 72 C10 Stepside Restore/Build Looking great!

04-23-2014, 06:14 AM	#114
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Roushinator's 72 C10 Stepside Restore/Build Say, Those car (wheel/tire) dollies I see your project sitting on, are those the 1,000 pounders from Harbor Freight?

05-01-2014, 03:07 AM	#115
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Roushinator's 72 C10 Stepside Restore/Build nice build. im in baton rouge / denham springs also. You don't happen to live in springlake /fairhill do you? __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw



Register or Log In To remove these advertisements.

06-22-2014, 10:07 PM	#116
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Working like crazy but picked this up a few weeks ago. This bed is 100 times better than mine. Still I am going to use a few pieces off of mine to make It better. Good thing about this deal was that I already has a good wood bed and came with a new rear bumper and rear sliding window. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

06-22-2014, 10:08 PM	#117
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Got some work done today. Ready for blasting and Primer. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

02-04-2015, 10:41 AM	#118
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Here are my goodies that came in.... And here it is Powder Coated.. __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

02-04-2015, 10:43 AM	#119
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: Roushinator's 72 C10 Stepside Restore/Build Ditched the rebuild effort on the old motor. 2014 Camaro SS 6.2L with 6 Speed Auto. 196 miles. But.... i dont think the porter-built inner frame stiffner will work with my new motor/trans that i just got.... __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

02-04-2015, 01:29 PM	#120
Justin@EntropyRad Registered User Join Date: Jan 2015 Location: Charlotte, NC Posts: 483	Re: Roushinator's 72 C10 Stepside Restore/Build Serious gear in that thing!

02-19-2015, 11:21 AM	#121
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Roushinator's 72 C10 Stepside Restore/Build Nice build! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-19-2015, 06:23 PM	#123
Xeen Registered User Join Date: Aug 2012 Location: Topeka Kansas Posts: 2,655	Re: Roushinator's 72 C10 Stepside Restore/Build That Camaro motor is wicked, your truck just went to bad to the bone status. __________________ Please call me Brian. Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build

02-19-2015, 06:30 PM	#124
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Roushinator's 72 C10 Stepside Restore/Build Nice... __________________ Brannon Yazell 67' C10 mated w/ a 01' Silverado, extreme custom 2015 Chevy 2500 Z71 LTZ Crew Cab MSA, Motorsports Authority, Rigid Industries, Magnaflow, Michigan Metal Works, Raceline, BASF, Street Trucks http://67-72chevytrucks.com/vboard/s...d.php?t=624964

02-26-2015, 04:29 PM	#125
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Roushinator's 72 C10 Stepside Restore/Build Nice! I'm late, but will be watching. Carry on! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

Register or Log In To remove these advertisements.