08-15-2017, 10:06 AM | #1 |
Registered User
Join Date: Apr 2017
Location: Brazil In.
Posts: 2
|
Shortening a bed
I'm sure this is on here some where but I'm cutting a long bed down to make a short bed on my 66 can anyone tell me how much comes out of the front and the rear. Thanks
|
08-15-2017, 10:31 AM | #2 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: Shortening a bed
I believe you want to take 12" out of the front and 8" out of the rear.
|
08-15-2017, 11:43 AM | #3 |
Senior Member
Join Date: Jun 2014
Location: Mocksville, NC
Posts: 1,724
|
Re: Shortening a bed
I thought I remember reading somewhere that the wheel well opening on the shortbeds is 2" shorter as well, but I don't know if that's in addition to the 12" and 8" cuts, or included in those.
__________________
Builds: Green Gus the 68 C10 ; Sullii the 72 1500 - Instagram: @dr.hewitt - C10 Concept/Development Photos: Master Thread |
08-22-2017, 11:56 AM | #4 |
Registered User
Join Date: May 2017
Location: Morgantown Kentucky
Posts: 24
|
Re: Shortening a bed
Sound about right I think if I'm correct which if im not someone correct me if you measure from the center or the wheel forward 12 inches and make a mark and measure 12 inches from the font if the bed back and Mark the measurement between the 2 marks is what should be removed to make the wheel bust center of the wheel arch then the 8 inches off the back and should be correct length
|
08-22-2017, 02:34 PM | #5 |
Registered User
Join Date: Oct 2012
Location: Philly, PA
Posts: 535
|
Re: Shortening a bed
If you haven't, do a search in The 1960 - 1966 Chevrolet & GMC Pickups section, there's several threads about shortening the bed, like this ... http://67-72chevytrucks.com/vboard/s...ght=shortening
__________________
My truck ain't dead, it just smells funny. |
08-23-2017, 08:50 AM | #6 |
Registered User
Join Date: Apr 2006
Location: Spring, Texas
Posts: 167
|
Re: Shortening a bed
Powerblock guys did this on a build. Should be able to find it online.
__________________
'72 3/4 Cheyenne Super 402/TH400 Gear Vendors '72 3/4 Cheyenne Super 350/200R4 '50 1/2 Chevy 3 Window |
Bookmarks |
|
|