The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-05-2018, 08:13 PM   #1
Praxiss454
Registered User
 
Praxiss454's Avatar
 
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
Leaking near flywheel

I've noticed a few puddles of oil under my truck lately, and so I finally get under there to look around. This may be a really stupid question, but am I supposed to be able to see my flywheel like this? This *seems* like the origin of my oil leak.

I guess maybe it's leaking from the oil pan gasket or elsewhere and just blowing back to this spot but this just doesn't seem right to me.

__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
Praxiss454 is offline   Reply With Quote
Old 03-05-2018, 08:21 PM   #2
61_FL_Apache
Who Me?
 
61_FL_Apache's Avatar
 
Join Date: Sep 2010
Location: Royal Palm Beach, FL
Posts: 4,064
Re: Leaking near flywheel

What engine and trans do you have? that's usually covered up by an inspection cover.
__________________
Steve

1997 Tahoe LT 4D 2WD (DD)
1961 Apache 10 (sold)
1965 C10 Stepper (sold)
61_FL_Apache is offline   Reply With Quote
Old 03-05-2018, 08:25 PM   #3
Praxiss454
Registered User
 
Praxiss454's Avatar
 
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
Re: Leaking near flywheel

Quote:
Originally Posted by 61_FL_Apache View Post
What engine and trans do you have? that's usually covered up by an inspection cover.
It is the L6 230 engine, and 3 speed manual trans. Assume it's the SM318 but I don't know how to confirm that. In any case, do you think this would cause a bunch of oil to leak out? Seems like it to me.
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
Praxiss454 is offline   Reply With Quote
Old 03-05-2018, 08:27 PM   #4
61_FL_Apache
Who Me?
 
61_FL_Apache's Avatar
 
Join Date: Sep 2010
Location: Royal Palm Beach, FL
Posts: 4,064
Re: Leaking near flywheel

I had a combo like that on my 65, but dont remember what was covered up or if some of the flywheel was exposed.
__________________
Steve

1997 Tahoe LT 4D 2WD (DD)
1961 Apache 10 (sold)
1965 C10 Stepper (sold)
61_FL_Apache is offline   Reply With Quote
Old 03-05-2018, 09:18 PM   #5
Nanook
Registered User
 
Nanook's Avatar
 
Join Date: Feb 2016
Location: Georgetown, TX and Bragg Creek, AB
Posts: 172
Re: Leaking near flywheel

It seems you are missing part of the inspection cover...I can try and get a picture when I am in the shop. Could be a pan gasket or rear engine seal leak.
Nanook is offline   Reply With Quote
Old 03-05-2018, 09:22 PM   #6
Nanook
Registered User
 
Nanook's Avatar
 
Join Date: Feb 2016
Location: Georgetown, TX and Bragg Creek, AB
Posts: 172
Re: Leaking near flywheel

Try this....
Attached Images
 
Nanook is offline   Reply With Quote
Old 03-05-2018, 10:02 PM   #7
Praxiss454
Registered User
 
Praxiss454's Avatar
 
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
Re: Leaking near flywheel

Thanks Nanook, got a part number by chance? Having trouble finding it for sale anywhere that fits my engine/trans.
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
Praxiss454 is offline   Reply With Quote
Old 03-05-2018, 10:09 PM   #8
hotrodder
Registered User
 
Join Date: Oct 2011
Location: Bloomington Indiana
Posts: 322
Re: Leaking near flywheel

I don't think the cover is going to cure the leak. Most likley rear main seal, or pan gasket.
hotrodder is offline   Reply With Quote
Old 03-05-2018, 10:17 PM   #9
vetnat
Senior Member
 
Join Date: Jun 2015
Location: Moose Jaw, SK
Posts: 510
Re: Leaking near flywheel

Hi Praxiss. My truck was also missing this piece. 235 and 3 speed manual trans, so the cover looks a bit different on mine. I got the cover from a wrecking yard, but you could try Aspen Auto.
__________________
1961 GMC half ton, short step, Canadian model. Just starting work on it.
vetnat is offline   Reply With Quote
Old 03-06-2018, 12:19 AM   #10
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Leaking near flywheel

You have either a leaking pan gasket or a rear main seal. The missing cover has nothing to do with the leak.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 03-06-2018, 01:40 AM   #11
Praxiss454
Registered User
 
Praxiss454's Avatar
 
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
Re: Leaking near flywheel

Thanks for confirming, Captainfab, hotrodder. It sounds like in order to change the main seal I'd have to drop the oil pan so I might as well do both at the same time.
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
Praxiss454 is offline   Reply With Quote
Old 03-06-2018, 09:15 AM   #12
dracko
Registered User
 
dracko's Avatar
 
Join Date: Jan 2010
Location: Regina, SK
Posts: 804
Re: Leaking near flywheel

Try to get a 1 piece felpro blueline pan gasket. They’re the bees knees compared to the old ones you have to piece together and join with silicone. They also come with little tabs that hold the gasket in place while you install the pan.
dracko is offline   Reply With Quote
Old 03-06-2018, 09:23 AM   #13
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: Leaking near flywheel

https://www.summitracing.com/parts/FEL-OS34509T/
Best ones I have ever used.
The Rocknrod is offline   Reply With Quote
Old 03-06-2018, 09:33 AM   #14
61_FL_Apache
Who Me?
 
61_FL_Apache's Avatar
 
Join Date: Sep 2010
Location: Royal Palm Beach, FL
Posts: 4,064
Re: Leaking near flywheel

I used one on my 61 and loved it!
__________________
Steve

1997 Tahoe LT 4D 2WD (DD)
1961 Apache 10 (sold)
1965 C10 Stepper (sold)
61_FL_Apache is offline   Reply With Quote
Old 03-06-2018, 10:35 AM   #15
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,495
Re: Leaking near flywheel

Quote:
Originally Posted by Praxiss454 View Post
Thanks for confirming, Captainfab, hotrodder. It sounds like in order to change the main seal I'd have to drop the oil pan so I might as well do both at the same time.
Whoa! Backup!
Never assume anything!
First order of business is clean up the oil mess. Clean enough to eat off it. Clean enough to see where it’s actually leaking from. Start at the top and work down.
Most of that oil is likely from the valve cover. Somewhere high up and to the front of the motor.
I had a strange leak once on my old 283. Valve cover leaking at the front. Ran down to the pan, along the pan rail and showed up on the tranny shift rods.
So before you put a wrench to it or open your wallet real wide, do yourself a favour and find the source.
geezer#99 is online now   Reply With Quote
Old 03-06-2018, 11:17 AM   #16
dracko
Registered User
 
dracko's Avatar
 
Join Date: Jan 2010
Location: Regina, SK
Posts: 804
Re: Leaking near flywheel

Valve covers, timing cover, pan gasket....have some fun and do’em all with good gaskets. You won’t regret it, nice having a 60 year old truck that doesn’t leak.

Of course, it’s a lot more fun if it’s on an engine stand and you don’t have oil dripping in your eye as you put the pan on.
dracko is offline   Reply With Quote
Old 03-06-2018, 12:35 PM   #17
Praxiss454
Registered User
 
Praxiss454's Avatar
 
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
Re: Leaking near flywheel

Quote:
Originally Posted by geezer#99 View Post
Whoa! Backup!
Never assume anything!
First order of business is clean up the oil mess. Clean enough to eat off it. Clean enough to see where it’s actually leaking from. Start at the top and work down.
Most of that oil is likely from the valve cover. Somewhere high up and to the front of the motor.
I had a strange leak once on my old 283. Valve cover leaking at the front. Ran down to the pan, along the pan rail and showed up on the tranny shift rods.
So before you put a wrench to it or open your wallet real wide, do yourself a favour and find the source.
Valve cover gasket is new and that area looks clean, but I agree cleaning everything is a good first step. Though I'm not entirely sure how to accomplish that with the engine still in the truck. I've read dollar store oven cleaner is good.
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
Praxiss454 is offline   Reply With Quote
Old 03-07-2018, 12:29 AM   #18
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Leaking near flywheel

To my knowledge, Fel Pro doesn't make the one piece reuseable pan gasket for the 230/250 I6 that the OP has.

Quote:
Originally Posted by dracko View Post
Try to get a 1 piece felpro blueline pan gasket. They’re the bees knees compared to the old ones you have to piece together and join with silicone. They also come with little tabs that hold the gasket in place while you install the pan.
Quote:
Originally Posted by The Rocknrod View Post
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 03-07-2018, 04:22 PM   #19
Praxiss454
Registered User
 
Praxiss454's Avatar
 
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
Re: Leaking near flywheel

I didn't see any single piece oil pan gaskets, so I went w/ the multi piece from rockauto. Gonna try to get all that gunk cleaned off this weekend and see what I'm working with before dropping the pan.
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
Praxiss454 is offline   Reply With Quote
Old 03-07-2018, 05:59 PM   #20
Chevy Fleetside
Registered User
 
Chevy Fleetside's Avatar
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,774
Re: Leaking near flywheel

Thanks for the thread. Reminds me I have to do my oil pan/rear seal also. woo hoo.
__________________
"A man and his truck, what a beautiful thing"

65 Short Fleetside BBC
65 Long Fleetside 283 3 on the tree for now.
my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536
Chevy Fleetside is offline   Reply With Quote
Old 03-07-2018, 09:53 PM   #21
factorystock
Registered User
 
factorystock's Avatar
 
Join Date: Feb 2007
Location: west coast
Posts: 3,343
Re: Leaking near flywheel

99% positive the rear main seal is leaking, not the pan gasket, seal probably hard as a rock on an original never rebuilt 50+ year old engine. Very difficult to change out with engine still in truck. There should be a rectangular cover plate in the open area. They are often left off or lost after a clutch job. This is what it looks like and may very well be correct for the 230 250 also https://www.ebay.com/itm/1956-62-CHE...JZGf1X&vxp=mtr

Last edited by factorystock; 03-07-2018 at 10:04 PM.
factorystock is offline   Reply With Quote
Old 03-07-2018, 10:23 PM   #22
Railroader
Registered User
 
Railroader's Avatar
 
Join Date: Mar 2018
Location: Florence Ms
Posts: 117
Re: Leaking near flywheel

My 250-6 is leaking also. Replaced once when I did oil pan. Now Pan doesn't leak, seal does.

Any hot tips on replacing seal?
Railroader is offline   Reply With Quote
Old 03-08-2018, 12:25 AM   #23
rvrfoot
Registered User
 
Join Date: Oct 2016
Location: san bernardino ca
Posts: 1,611
Re: Leaking near flywheel

The rear main seal is leaking.
rvrfoot is offline   Reply With Quote
Old 03-13-2018, 11:05 AM   #24
Praxiss454
Registered User
 
Praxiss454's Avatar
 
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
Re: Leaking near flywheel

With the help of some kerosene, some degreaser, and a power washer, I cleaned up the engine reasonably well, and then drove it around for a while. Most of the engine looks to be dry/leak free, but it looks like there is some fresh oil by the rear main seal.

I know there are a bunch of threads on this, but I see some conflicting info. On my 65 GMC 1000 w/ the L6 230, do I need to unbolt or loosen the engine, and jack it up in order to get the oil pan off? In my GMC Maintenance Manual, the procedure for changing the rear main seal does not include this step.

I'm not looking forward to dropping the pan. It looks like a PO used gorilla glue or some kind of slight expanding foam to seal the pan. The pan has also been dropped and sprayed blue, but the blue is peeling off and I can see the original red beneath it. So Ideally I'll completely remove the pan, clean it, spray red again, and button it back up.
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
Praxiss454 is offline   Reply With Quote
Old 03-14-2018, 12:58 PM   #25
Praxiss454
Registered User
 
Praxiss454's Avatar
 
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
Re: Leaking near flywheel

Quote:
Originally Posted by Praxiss454 View Post
I know there are a bunch of threads on this, but I see some conflicting info. On my 65 GMC 1000 w/ the L6 230, do I need to unbolt or loosen the engine, and jack it up in order to get the oil pan off? In my GMC Maintenance Manual, the procedure for changing the rear main seal does not include this step.
Well, rain in the forecast here for the next week or more, so not sure I'll get a chance to dive into this for a while. One of the drawbacks of not having a garage with enough space to work in.
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD
Thanks everyone for the help over the years.
Praxiss454 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com