Project parts for sale!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigjimzlll · 01-12-2005, 11:33 PM

how about the rear differential cover...want to part with it??

phantom dually · 01-12-2005, 11:37 PM

I am going to part the rearend out if I get no sale in the next week. I paid big $$ for that damn thing!! If I part you will be first in line. Thanks

bigjimzlll · 01-12-2005, 11:38 PM

sorry I just saw it was for a 10 bolt...thought it was a 12

phantom dually · 01-13-2005, 07:08 PM

Ttt

NotLowerThanMe · 01-13-2005, 07:28 PM

Do you have a picture of the front bumper? I'm interested in it.

longnlow72 · 01-13-2005, 09:51 PM

would the tonneau fit a 67-72? is that shipped? because there site says 450 new, does yours have anything the one im lookin at doesnt(since you paid 600 new)?
thanks ben

phantom dually · 01-13-2005, 10:07 PM

That is what I paid shipped and all?? Im not exact on that. It measures 85 inches wide inside bed. Shipping this thing would be HELL!!

longnlow72 · 01-14-2005, 12:12 AM

ill check my bed, what do u think shippin would be?

ol skool 68 · 01-14-2005, 11:05 AM

how much for the crossmember and the upper and lower control arms?

phantom dually · 01-14-2005, 06:50 PM

Pm sent to you!!

NotLowerThanMe · 01-14-2005, 07:53 PM

Just wondering if you were able to take a pic of the front bumper?

Thanks

phantom dually · 01-14-2005, 10:05 PM

Here are a few pics. Not sure how good they are. There is a little surface rust from the raw metal but all will come off easily with a light sand before paint. Also have bracket to munt to 73-87 frame rails.

phantom dually · 01-15-2005, 09:38 AM

Ttt

Deuce · 01-15-2005, 02:14 PM

Do you still have the upper and lower control arms for the front suspension?? Will they fit a stock '80 cross member??

phantom dually · 01-15-2005, 04:35 PM

I have the complete front member with tubular uppers and lowers. The arms are made to go with the member.

Deuce · 01-15-2005, 09:42 PM

OK Thanks.

bagged_and_bodydrop · 01-16-2005, 01:45 AM

Would you be interested in just selling the compressor? I need another badly one viar 450 aint cuttin it, probly about to burn up 215 psi off one compressor I don't think thats good for it, but its fun. lol. Thanks.

phantom dually · 01-16-2005, 12:08 PM

I do not want to part the air ride out. Thanks!!

phantom dually · 01-16-2005, 06:06 PM

Ttt

laynlow77 · 01-16-2005, 10:04 PM

if that rear disc conversion will work ill take it!!! just let me know

r0lf- · 01-16-2005, 11:01 PM

If that bolt on 4 link isnt sold Im VERY interested in it! PM Sent!

phantom dually · 01-17-2005, 06:33 PM

PM sent back to you Rolf Also Laynlow77 what rearend do you have??

laynlow77 · 01-17-2005, 06:41 PM

its a stock 12 bolt...i know its not a posi...but other than that i dont know much else....if theres ways of knowing more let me know and ill check...thanks

phantom dually · 01-17-2005, 06:46 PM

Maybe someone here may know. It would only be diffrent if the backing plate holes are diffrent on the flange in which they bolt to. I dont want to sell you something you cant use!!

phantom dually · 01-17-2005, 10:07 PM

Ttt

01-12-2005, 11:33 PM	#26
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	how about the rear differential cover...want to part with it?? __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

01-12-2005, 11:37 PM	#27
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	I am going to part the rearend out if I get no sale in the next week. I paid big $$ for that damn thing!! If I part you will be first in line. Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-12-2005, 11:38 PM	#28
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	sorry I just saw it was for a 10 bolt...thought it was a 12 __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

01-13-2005, 07:08 PM	#29
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-13-2005, 09:51 PM	#31
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	would the tonneau fit a 67-72? is that shipped? because there site says 450 new, does yours have anything the one im lookin at doesnt(since you paid 600 new)? thanks ben __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

01-13-2005, 07:28 PM	#30
NotLowerThanMe Registered User Join Date: Nov 2003 Location: East Bethel, MN Posts: 27	Do you have a picture of the front bumper? I'm interested in it.

01-13-2005, 10:07 PM	#32
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	That is what I paid shipped and all?? Im not exact on that. It measures 85 inches wide inside bed. Shipping this thing would be HELL!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-14-2005, 12:12 AM	#33
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	ill check my bed, what do u think shippin would be? __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

01-14-2005, 11:05 AM	#34
ol skool 68 turnin wrenches Join Date: Dec 2002 Location: my garage Posts: 263	how much for the crossmember and the upper and lower control arms? __________________ "three can keep a secret if two are dead" -unknown hell's angel- D.M.C. -FF- 68 SWB full frame off (project ol skool) 2000 s-10 formally bagged but now my daily driver...

01-14-2005, 06:50 PM	#35
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Pm sent to you!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-14-2005, 07:53 PM	#36
NotLowerThanMe Registered User Join Date: Nov 2003 Location: East Bethel, MN Posts: 27	Just wondering if you were able to take a pic of the front bumper? Thanks

01-14-2005, 10:05 PM	#37
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	bumper pics Here are a few pics. Not sure how good they are. There is a little surface rust from the raw metal but all will come off easily with a light sand before paint. Also have bracket to munt to 73-87 frame rails. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-15-2005, 09:38 AM	#38
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-15-2005, 02:14 PM	#39
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Do you still have the upper and lower control arms for the front suspension?? Will they fit a stock '80 cross member?? __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

01-15-2005, 04:35 PM	#40
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	I have the complete front member with tubular uppers and lowers. The arms are made to go with the member. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

01-15-2005, 09:42 PM	#41
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	OK Thanks. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

01-16-2005, 01:45 AM	#42
bagged_and_bodydrop Just drag it Join Date: Dec 2004 Location: ardmore, oklahoma Posts: 98	Would you be interested in just selling the compressor? I need another badly one viar 450 aint cuttin it, probly about to burn up 215 psi off one compressor I don't think thats good for it, but its fun. lol. Thanks. Attached Images

01-16-2005, 12:08 PM	#43
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	I do not want to part the air ride out. Thanks!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-16-2005, 06:06 PM	#44
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-16-2005, 10:04 PM	#45
laynlow77 Registered User Join Date: Nov 2004 Posts: 115	if that rear disc conversion will work ill take it!!! just let me know

01-16-2005, 11:01 PM	#46
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	If that bolt on 4 link isnt sold Im VERY interested in it! PM Sent! __________________ 1978 Money Pit - CUSTOM DELUXE!!!!

01-17-2005, 06:33 PM	#47
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	PM sent back to you Rolf Also Laynlow77 what rearend do you have?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-17-2005, 06:41 PM	#48
laynlow77 Registered User Join Date: Nov 2004 Posts: 115	its a stock 12 bolt...i know its not a posi...but other than that i dont know much else....if theres ways of knowing more let me know and ill check...thanks

01-17-2005, 06:46 PM	#49
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Maybe someone here may know. It would only be diffrent if the backing plate holes are diffrent on the flange in which they bolt to. I dont want to sell you something you cant use!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-17-2005, 10:07 PM	#50
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Register or Log In To remove these advertisements.