CA 88 chevy suburban 1/2ton 2wd - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevybuldr · 01-19-2011, 12:40 AM

Quote:

Originally Posted by SBTork

If you can get decent packing for the grille I will take my chances on it showing up ok. The front door panels still sound like something of interest to me. I can transfer my trim to these panels. The barn door, door panels, I am looking for the carpet lowers and the plastic upper trim panels. If they're cracked I will pass, but take some pics and we can go from there as mine are in really rough shape. I will take the speaker grilles. I will PM you a shipping address.

Here are pics of the door panels. You can see that the drivers side is getting a little light top side.

chevybuldr · 01-19-2011, 12:45 AM

The scratches on the rear door panels

The white is the cracks on the right cargo door panel

The cargo door carpet panels. The right door one needs to be glue back in one spot. Carpet of coarse could use a cleaning.

chevybuldr · 01-19-2011, 12:48 AM

The other window trim for the left cargo door and also another shot of the grill. Chrome does have a few small dents on it.

SBTork · 01-19-2011, 03:11 AM

PM sent, thanks for taking such good pictures

TomsCheyenne · 01-19-2011, 08:34 AM

I am interested in the 2 front door power window regulators, the power lock solinoids, and both harnesses (with relay) if possible. I am in Maine, 04256.

chevybuldr · 01-19-2011, 10:46 AM

Quote:

Originally Posted by TomsCheyenne

I am interested in the 2 front door power window regulators, the power lock solinoids, and both harnesses (with relay) if possible. I am in Maine, 04256.

OK let me work on getting those out and checking the regulators teeth. I am assuming you want the harness that runs under the dash.

TomsCheyenne · 01-19-2011, 11:11 AM

That sounds good, thanks. Yes, I would need that harness as well.

jorgensensc · 01-19-2011, 08:24 PM

How are the seatbelts? How many sets are there? I would also be interested in the second row seat brackets andlatches that hold the second row seat back upright. Shipped to 77018 please. Please let me know.
Shawn
Posted via Mobile Device

Dale440rt · 01-19-2011, 09:58 PM

I would like to buy the antenna. Can you get a pic of it and a close up of the base for me where it mates to the fender? I want to make sure it is the correct one for my truck!

Thanks Dale

Email Dale440rt@aol.com

chevybuldr · 01-20-2011, 12:25 AM

Quote:

Originally Posted by Dale440rt

I would like to buy the antenna. Can you get a pic of it and a close up of the base for me where it mates to the fender? I want to make sure it is the correct one for my truck!

Thanks Dale

Email Dale440rt@aol.com

Sorry the Antenna is junk.

chevybuldr · 01-20-2011, 12:28 AM

Quote:

Originally Posted by jorgensensc

How are the seatbelts? How many sets are there? I would also be interested in the second row seat brackets andlatches that hold the second row seat back upright. Shipped to 77018 please. Please let me know.
Shawn
Posted via Mobile Device

You mean the pieces that hold the seats to the floor?

chevybuldr · 01-20-2011, 02:12 AM

Pic of the fuel filler and door.

jorgensensc · 01-20-2011, 07:41 AM

Quote:

Originally Posted by chevybuldr

You mean the pieces that hold the seats to the floor?

I'm talking about the front seat brackets that attach the second row seat to the floor, and allow the seat to flip up.
And I'm also talking about the latches that are attached to the side cargo walls that the second row seat back clicks into when the seat is raised up. Also the small corresponding latches bolted to the seat that click into the above latches. Am I making any sense?
Any idea about the seat belts? Were the second row shoulder belts also? Did it have a third row?
Thanks!
Shawn
Posted via Mobile Device

chevybuldr · 01-20-2011, 10:28 AM

Quote:

Originally Posted by jorgensensc

I'm talking about the front seat brackets that attach the second row seat to the floor, and allow the seat to flip up.
And I'm also talking about the latches that are attached to the side cargo walls that the second row seat back clicks into when the seat is raised up. Also the small corresponding latches bolted to the seat that click into the above latches. Am I making any sense?
Any idea about the seat belts? Were the second row shoulder belts also? Did it have a third row?
Thanks!
Shawn
Posted via Mobile Device

You make perfect sense. I believe that all of that is there. Going to have to look and see if the second row is shoulder belts or not. The third seat is gone. Those belts attach to the seat frame.

american revolution · 01-20-2011, 11:52 PM

how much for the outside sideview mirrors...local can pick up

BigRed76 · 01-21-2011, 12:48 AM

Quote:

Originally Posted by chevybuldr

Pic of the fuel filler and door.

Thanks for the pic of the fuel door, but I'm gonna pass since upon further research im going in a different direction with the blazer tank swap fuel filler

chevybuldr · 01-21-2011, 01:12 AM

Quote:

Originally Posted by american revolution

how much for the outside sideview mirrors...local can pick up

sold pending payment

chevybuldr · 01-21-2011, 01:13 AM

Quote:

Originally Posted by BigRed76

Thanks for the pic of the fuel door, but I'm gonna pass since upon further research im going in a different direction with the blazer tank swap fuel filler

No problem thanks for letting me know.

chevybuldr · 01-22-2011, 12:58 PM

Still lots of good parts guys.

spudz · 01-22-2011, 01:08 PM

did the radio sell?

chevybuldr · 01-22-2011, 01:18 PM

Quote:

Originally Posted by spudz

did the radio sell?

Well I gave him a Price on it waiting for payment. I will give him a few more days.

chevybuldr · 01-23-2011, 08:44 PM

Seatbelts 75.00

chevybuldr · 01-23-2011, 09:00 PM

Tomscheyenne pics

slugish · 01-24-2011, 12:33 AM

Am interested in the tilt steerring coluum . Trying to find out if it is compatible with a 84 pickup with the wipers & turn signal on the coluum . Also if the switch on the lower 1/2 is compatible. Do you know ?

chevybuldr · 01-24-2011, 01:05 AM

Quote:

Originally Posted by slugish

Am interested in the tilt steerring coluum . Trying to find out if it is compatible with a 84 pickup with the wipers & turn signal on the coluum . Also if the switch on the lower 1/2 is compatible. Do you know ?

I dont know for sure so I can't say. Looking at LMC it says that the ignition switch in the years of mine and yours. The turn signal switch and the windshield switch are on the break.
http://www.lmctruck.com/icatalog/csb/full.aspx?Page=162

01-19-2011, 12:45 AM	#27
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 88 chevy suburban 1/2ton 2wd The scratches on the rear door panels The white is the cracks on the right cargo door panel The cargo door carpet panels. The right door one needs to be glue back in one spot. Carpet of coarse could use a cleaning. Attached Images

01-19-2011, 12:48 AM	#28
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 88 chevy suburban 1/2ton 2wd The other window trim for the left cargo door and also another shot of the grill. Chrome does have a few small dents on it. Attached Images

01-19-2011, 03:11 AM	#29
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,856	Re: 88 chevy suburban 1/2ton 2wd PM sent, thanks for taking such good pictures __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

01-19-2011, 08:34 AM	#30
TomsCheyenne Registered User Join Date: Jun 2009 Location: Mechanic Falls, Maine 04256 Posts: 62	Re: 88 chevy suburban 1/2ton 2wd I am interested in the 2 front door power window regulators, the power lock solinoids, and both harnesses (with relay) if possible. I am in Maine, 04256.

01-19-2011, 11:11 AM	#32
TomsCheyenne Registered User Join Date: Jun 2009 Location: Mechanic Falls, Maine 04256 Posts: 62	Re: 88 chevy suburban 1/2ton 2wd That sounds good, thanks. Yes, I would need that harness as well. Last edited by TomsCheyenne; 01-19-2011 at 11:12 AM.

01-19-2011, 08:24 PM	#33
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,006	Re: 88 chevy suburban 1/2ton 2wd How are the seatbelts? How many sets are there? I would also be interested in the second row seat brackets andlatches that hold the second row seat back upright. Shipped to 77018 please. Please let me know. Shawn Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

01-19-2011, 09:58 PM	#34
Dale440rt Active Member Join Date: Oct 2006 Location: Chicago Posts: 48	Re: 88 chevy suburban 1/2ton 2wd I would like to buy the antenna. Can you get a pic of it and a close up of the base for me where it mates to the fender? I want to make sure it is the correct one for my truck! Thanks Dale Email Dale440rt@aol.com

01-20-2011, 02:12 AM	#37
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 88 chevy suburban 1/2ton 2wd Pic of the fuel filler and door. Attached Images

01-20-2011, 11:52 PM	#40
american revolution Registered User Join Date: Apr 2007 Location: san francisco Posts: 446	Re: 88 chevy suburban 1/2ton 2wd how much for the outside sideview mirrors...local can pick up

01-22-2011, 12:58 PM	#44
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 88 chevy suburban 1/2ton 2wd Still lots of good parts guys.

01-22-2011, 01:08 PM	#45
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: 88 chevy suburban 1/2ton 2wd did the radio sell? __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

01-23-2011, 08:44 PM	#47
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 88 chevy suburban 1/2ton 2wd Seatbelts 75.00 Attached Images Last edited by chevybuldr; 01-25-2011 at 12:41 AM.

01-23-2011, 09:00 PM	#48
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: 88 chevy suburban 1/2ton 2wd Tomscheyenne pics Attached Images

01-24-2011, 12:33 AM	#49
slugish Slugish Join Date: Jan 2005 Location: Earlysville, Va. Posts: 1,024	Re: 88 chevy suburban 1/2ton 2wd Am interested in the tilt steerring coluum . Trying to find out if it is compatible with a 84 pickup with the wipers & turn signal on the coluum . Also if the switch on the lower 1/2 is compatible. Do you know ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.