Question about engine hoist - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rick0312 · 10-03-2007, 09:41 PM

thanks guys.

cableguy0 · 10-03-2007, 10:19 PM

a fully dressed small block with an iron intake is 550lbs about 500 with alum intake and about 450 or so with alum heads and intake. i used my two ton to pull and reinstall a fully dressed sbc with and sm465 hanging off the back. no issues mine came from summit quite a few years ago.that was all with boom fully extended at 1/2 ton setting.

10-03-2007, 09:41 PM	#26
rick0312 Registered User Join Date: Jan 2006 Location: Warrington, PA Posts: 403	Re: Question about engine hoist thanks guys.

10-03-2007, 10:19 PM	#27
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: Question about engine hoist a fully dressed small block with an iron intake is 550lbs about 500 with alum intake and about 450 or so with alum heads and intake. i used my two ton to pull and reinstall a fully dressed sbc with and sm465 hanging off the back. no issues mine came from summit quite a few years ago.that was all with boom fully extended at 1/2 ton setting. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.