The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-23-2012, 02:08 AM   #1
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Stock Manifold Options for LS Swaps

I have been thinking about Trailblazer SS manifolds. I did some searching and found part numbers. They are supposed fit almost any frame from 60's to 80's.

12600526 MANIFOLD. Engine Exhaust Manifold - LH. Required: 01LHD.
12600527 MANIFOLD. Engine Exhaust Manifold - RH. Required: 01RHD.



LINK to data page.

www.GMPartsDirect.com
Left Side: $51.18
Right Side: $48.49




Please feel free to ADD PICTURES.
I would like to see some installed on 67-72 4x4 trucks....
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE

Last edited by usmcchevy; 07-03-2012 at 07:14 AM.
mcmlxix is offline   Reply With Quote
Old 06-23-2012, 10:07 AM   #2
gringoloco
A guy with a truck
 
gringoloco's Avatar
 
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,920
Re: TBSS Exhaust Manifold Info (Pictures)

Wow, good prices. GMpartsdirect generally kills you on shipping though. Check out the build thread index-- I know there are a few running them in there for sure. Or, do a search for TBSS...
Posted via Mobile Device
__________________
-Chris

Instagram _elgringoloco_

'70 Short-Wide How to: Ruin a perfectly good C10
‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd
'72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD)
'72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD)
'05 Yukon Daily Driven (not so stock) Yukon (SOLD)
‘07 Yukon Denali (daily)

Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy
gringoloco is offline   Reply With Quote
Old 06-24-2012, 02:29 PM   #3
usmcchevy
Has more rust than truck...
 
usmcchevy's Avatar
 
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
Re: TBSS Exhaust Manifold Info (Pictures)

I used them, Only clearance issue was between the motor mounts and the manifolds. I shaved the bump off of the mounts. Others just do a little clearanceing with a grinder.

__________________
1972 Custom/10 SWB, 4.8/4l80e
Build thread

LSx Swap FAQ index
usmcchevy is offline   Reply With Quote
Old 06-26-2012, 11:59 AM   #4
MAK191
Registered User
 
Join Date: Nov 2009
Location: FL
Posts: 335
Re: TBSS Exhaust Manifold Info (Pictures)

I'm using TBSS manifolds with dirty dingo adjustable 73+ mounts with the matching stands and rubber. They fit great with zero issues, they are not even close to the mounts or stands. I did notice the part numbers cast on mine are 12567483(LT) & 12567484(RT). Not sure what the difference is.
Attached Images
   
MAK191 is offline   Reply With Quote
Old 06-26-2012, 01:20 PM   #5
softballnrd27
Always a work in progress
 
softballnrd27's Avatar
 
Join Date: Jun 2007
Location: Harker Heights, TX
Posts: 1,599
Re: TBSS Exhaust Manifold Info (Pictures)

They charge $25.41 to ship them for a total of $125 so not too bad if you don't have maninfolds that work already.
__________________
USMC Retired
Never trust a man who can't laugh at his own fart!
2010 Silverado Crew Cab
73 SWB 5.3/4l80e
Build Thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=695168
softballnrd27 is offline   Reply With Quote
Old 06-26-2012, 01:58 PM   #6
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: TBSS Exhaust Manifold Info (Pictures)

Does anybody know it the GMparts direct manifolds come with the heat shields?
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 06-26-2012, 03:05 PM   #7
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: TBSS Exhaust Manifold Info (Pictures)

Lists a seperate part number...in my experience with them, anything listed separate that doesn't have a "*, kit, package" listed means its the item ala carte. I would expect to get the manifold alone, no studs no heatshield.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 06-26-2012, 04:23 PM   #8
kwin
Registered User
 
kwin's Avatar
 
Join Date: May 2011
Location: Grande Prairie, Alberta
Posts: 368
Re: TBSS Exhaust Manifold Info (Pictures)

They don't ship to Canada!! AAAAAHhh!!
kwin is offline   Reply With Quote
Old 06-26-2012, 09:01 PM   #9
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: TBSS Exhaust Manifold Info (Pictures)

Quote:
Originally Posted by MAK191 View Post
I'm using TBSS manifolds with dirty dingo adjustable 73+ mounts with the matching stands and rubber. They fit great with zero issues, they are not even close to the mounts or stands. I did notice the part numbers cast on mine are 12567483(LT) & 12567484(RT). Not sure what the difference is.
Those two part numbers list as Chevy SSR truck manifolds...
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 06-26-2012, 10:50 PM   #10
gringoloco
A guy with a truck
 
gringoloco's Avatar
 
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,920
Re: TBSS Exhaust Manifold Info (Pictures)

Quote:
Originally Posted by kwin View Post
They don't ship to Canada!! AAAAAHhh!!
I do! ...and mine come with heat shields and pipes...
http://67-72chevytrucks.com/vboard/s...d.php?t=530619
Quote:
Originally Posted by mcmlxix View Post
Those two part numbers list as Chevy SSR truck manifolds...
Same engine, same chassis, stands to reason same manifolds. Never look at an SSR the same again...
__________________
-Chris

Instagram _elgringoloco_

'70 Short-Wide How to: Ruin a perfectly good C10
‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd
'72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD)
'72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD)
'05 Yukon Daily Driven (not so stock) Yukon (SOLD)
‘07 Yukon Denali (daily)

Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy
gringoloco is offline   Reply With Quote
Old 07-03-2012, 09:51 AM   #11
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: Stock Manifold Options for LS Swaps

2004+ GTO : 12563277 and 12563278
They look like they tuck close to the block and ont have two vertical studs. Should be plenty of frame clearance...



__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE

Last edited by mcmlxix; 07-03-2012 at 09:54 AM. Reason: added pic
mcmlxix is offline   Reply With Quote
Old 07-03-2012, 10:46 AM   #12
Wasted Income
Boosted Member
 
Wasted Income's Avatar
 
Join Date: May 2002
Location: Mackinaw, IL
Posts: 2,200
Re: Stock Manifold Options for LS Swaps

I used those GTO manifolds too....but in a little different configuration
__________________
1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq
1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift
1964 Buick Skylark Twin TURBO 383 LS pro-touring project
2014 VW Passat TDI - Daily Driver
Turbo diesel
2015 Sierra Denali HD Duramax Turbo diesel
2016 Ford Explorer Sport - Twin Turbskis
2017 Polaris RZR Turbo
2014 Nor-Tech Center Console - Twin Supercharged Outboards

TURBO ALL THE THINGS!!
Wasted Income is offline   Reply With Quote
Old 07-05-2012, 01:49 AM   #13
yossarian19
Registered User
 
Join Date: Sep 2011
Location: Nevada City, CA
Posts: 908
Re: Stock Manifold Options for LS Swaps

Any input on which (if any) manifolds for a stock '57 front end?
yossarian19 is offline   Reply With Quote
Old 07-06-2012, 12:27 PM   #14
68MoneyPit
Registered User
 
Join Date: Jan 2007
Location: Weatherford Tx.
Posts: 106
Re: Stock Manifold Options for LS Swaps

Didnt the ssr have different heads with d port on exhaust ?
68MoneyPit is offline   Reply With Quote
Old 07-07-2012, 05:07 AM   #15
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: Stock Manifold Options for LS Swaps

Quote:
Originally Posted by 68MoneyPit View Post
Didnt the ssr have different heads with d port on exhaust ?
I dont believe so. They started in 2003 with the 5.3L so it should be round port exhaust....

PS: I have a pair of 5th Gen Camaro manifolds on the way. I'll post pics when I get them...
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 07-11-2012, 08:45 PM   #16
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: Stock Manifold Options for LS Swaps

Also test fit the 2010 Camaro manifold... Camaro on the left, Sierra on the right...

__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 07-18-2012, 11:17 PM   #17
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: Stock Manifold Options for LS Swaps

Anyone know if the TBSS manifolds will fit with a 5.3/Dropmember set up?
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Old 07-19-2012, 12:36 PM   #18
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: Stock Manifold Options for LS Swaps

Anyone?? Can't seem to find what headers guys are running in the squares, with DM and LS Swap....
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Old 07-19-2012, 08:53 PM   #19
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: Stock Manifold Options for LS Swaps

Its 7" from the last manifold bolt on the head straight down to the flat gasket surface of the flange.
It sticks out 5.25" from the side of the block at its widest point. (Opposte of where the starter would attach.)






__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 10-29-2012, 12:00 PM   #20
mrhurt73
Registered User
 
Join Date: Aug 2012
Location: clifton forge, va
Posts: 261
Re: Stock Manifold Options for LS Swaps

does anybody know if the stock LM7 flange fits the TBSS manifolds?
i see they are both three bolt flanges, i was wondering if i could get that lucky. i need a set of manifolds, but was hoping to still use the pipe and flanges.
i know i will have to cut the pipes loose from the y so they will fit in the frame.

Quote:
Originally Posted by mcmlxix View Post
I have been thinking about Trailblazer SS manifolds. I did some searching and found part numbers. They are supposed fit almost any frame from 60's to 80's.

12600526 MANIFOLD. Engine Exhaust Manifold - LH. Required: 01LHD.
12600527 MANIFOLD. Engine Exhaust Manifold - RH. Required: 01RHD.



LINK to data page.

www.GMPartsDirect.com
Left Side: $51.18
Right Side: $48.49




Please feel free to ADD PICTURES.
I would like to see some installed on 67-72 4x4 trucks....
mrhurt73 is offline   Reply With Quote
Old 10-29-2012, 12:14 PM   #21
MAK191
Registered User
 
Join Date: Nov 2009
Location: FL
Posts: 335
Re: Stock Manifold Options for LS Swaps

The ones I have bolted right up. I think I have the SSR manifolds but they are identical to the TBSS ones
Posted via Mobile Device
MAK191 is offline   Reply With Quote
Old 11-03-2012, 10:12 PM   #22
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: Stock Manifold Options for LS Swaps

Quote:
Originally Posted by mcmlxix View Post
I have been thinking about Trailblazer SS manifolds. I did some searching and found part numbers. They are supposed fit almost any frame from 60's to 80's.

12600526 MANIFOLD. Engine Exhaust Manifold - LH. Required: 01LHD.
12600527 MANIFOLD. Engine Exhaust Manifold - RH. Required: 01RHD.



LINK to data page.

www.GMPartsDirect.com
Left Side: $51.18
Right Side: $48.49




Please feel free to ADD PICTURES.
I would like to see some installed on 67-72 4x4 trucks....

What are people using for reducers/collectors for the TBSS Manifolds? Do I have to find a TB and grab the exhaust system off of it, or is there an aftermarket piece?
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Old 11-05-2012, 03:17 PM   #23
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: Stock Manifold Options for LS Swaps

Quote:
Originally Posted by JNJchev77 View Post
What are people using for reducers/collectors for the TBSS Manifolds? Do I have to find a TB and grab the exhaust system off of it, or is there an aftermarket piece?

Anyone?

I wonder if an exhaust shop can fab some collectors for the manifolds?
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Old 11-05-2012, 06:05 PM   #24
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: Stock Manifold Options for LS Swaps

I unded up using the Camaro 2 bolt manifolds but I had the local waterjust guy cut two 3/8" steel flanges for a 2.5" OD exhaust pipe....
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 11-05-2012, 07:12 PM   #25
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: Stock Manifold Options for LS Swaps

Ya, looks like I'm just going to have some made, or make my own ;P... Thanks mcm
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Reply

Bookmarks

Tags
fuvk off

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com