|
|
|
02-13-2016, 12:41 PM
|
#1 |
|
Registered User
Join Date: Apr 2010
Location: Oregon
Posts: 1,182
|
Re: Rear End Swap
The 4x4 rear axle is only 58" wide, you may want a ZR2 which is 63". I got some good info from fredscarryall "US Army Sargent slam" build thread. He has all the S10 axle measurements on page 6
I ended up getting an Explorer 8.8, it's 59.5" wide 3.73 gears. The 63" ZR2 was just too wide for me. |
|
|
|
02-13-2016, 02:56 PM
|
#2 |
|
Registered User
Join Date: Feb 2016
Location: Woodstock, Ga
Posts: 5
|
Re: Rear End Swap
I selected mine after talking to the guys at code 504. I told him what wheels I wanted to run. He suggested the 4x4 rearend
|
|
|
|
|
02-13-2016, 09:54 PM
|
#3 | |
|
Registered User
Join Date: Nov 2015
Location: Jemez Springs, NM
Posts: 434
|
Re: Rear End Swap
Quote:
X2 on the 8.8 373 posi with disc breaks. Upullit for 160.00! |
|
|
|
|
|
02-20-2016, 10:54 PM
|
#4 |
|
Registered User
Join Date: Nov 2015
Location: Garland, Tx
Posts: 27
|
Re: Rear End Swap
i have heard a 98 ford explorer will bolt right up to a s10 frame. plus comes with 3.55 or 3.73 gears with disc. breaks
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
