CA 1961 C40 part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tchevs · 08-21-2018, 12:33 AM

Parting this 1961 c40. I’m keeping front clip and doors for my 62. Cab has nice floor, nice corners, decent rockers, nice roof but has rust on the ceiling right above passenger door. Gas tank is gone, but most interior is still there.
Bare cab $600
Steering Column $100
Gauge cluster $50 sold
19.5 wheels $200
Complete roller frame $300
Original 12’ bed. $500 sold
6cyl Engine $50
4speed tranny $50

All big items are pickup only, if you want any small items I can ship at your expense.

**DPowers** · 08-21-2018, 07:38 PM

I'd be interested in the cluster, knobs, ashtray, glovebox door (pending pics) and heater controls to 37843.

**Rolland** · 08-21-2018, 11:23 PM

I'll take the steering column assuming you can ship it.
Also interested in the transmission brake assembly.

tchevs · 08-22-2018, 12:31 AM

Hope pictures help.

tchevs · 08-22-2018, 12:35 AM

Quote:

Originally Posted by Rolland

I'll take the steering column assuming you can ship it.
Also interested in the transmission brake assembly.

I’ll check on how hard it is to remove from trans than I’ll let you know. I’ll check on shipping for column as well.

tchevs · 08-22-2018, 09:51 AM

Do you want the drum that’s on the tranny as well? I want to make sure on exactly what you need

**Rolland** · 08-22-2018, 10:42 AM

Yes I would need the drum also, and if everything appears to be there and in decent condition, let me know what you need for it. Thanks. Shipping to 80917.

**cff** · 08-22-2018, 11:20 AM

How bout a price to ship the rear diff 3rd member to 98264

tchevs · 08-22-2018, 08:02 PM

Quote:

Originally Posted by cff

How bout a price to ship the rear diff 3rd member to 98264

If you were here to remove I would sell it for cheap but do to the pain of taking the rear end apart I would have to get 200 plus what ever shipping adds up to. If you still want it I can remove it to get the weigh so that I can get a shipping quote.

tchevs · 08-22-2018, 08:40 PM

Quote:

Originally Posted by Rolland

Yes I would need the drum also, and if everything appears to be there and in decent condition, let me know what you need for it. Thanks. Shipping to 80917.

It is complete was still working and in decent shape. Quote from ups for shipping the column is $35. The brake stuff is a little heavier and quote was at $50.
$100 for column
$100 for brake stuff

**DPowers** · 08-22-2018, 10:18 PM

Quote:

Originally Posted by tchevs

Hope pictures help.

Interested. Shipped quote to 37843 please.

**Rolland** · 08-22-2018, 11:01 PM

Would you take $175 for the column and brake parts plus the $85 shipping for a total of $260 shipped? Thanks.

tchevs · 08-23-2018, 12:03 AM

Quote:

Originally Posted by DPowers

Interested. Shipped quote to 37843 please.

Cluster $50
Knobs $30
Ashtray $20
Door $20
Heater controls $40
Shipping $35
Total of $195

tchevs · 08-23-2018, 12:05 AM

Quote:

Originally Posted by Rolland

Would you take $175 for the column and brake parts plus the $85 shipping for a total of $260 shipped? Thanks.

Sounds good, send me your billing info.

**Rolland** · 08-23-2018, 12:34 AM

PM sent. Thank you.

tchevs · 08-23-2018, 01:04 AM

Quote:

Originally Posted by Rolland

PM sent. Thank you.

check your PM

**DPowers** · 08-23-2018, 11:12 PM

Quote:

Originally Posted by tchevs

Cluster $50
Knobs $30
Ashtray $20
Door $20
Heater controls $40
Shipping $35
Total of $195

Thanks but will have to pass.

**pimpston65** · 08-23-2018, 11:24 PM

does it have a 6cyl fan shroud? if so and fiberglass whats your price?

j.kirn · 08-23-2018, 11:59 PM

Does the hood have the apache 40 emblems?

tchevs · 08-24-2018, 10:15 AM

Quote:

Originally Posted by DPowers

Thanks but will have to pass.

You need them and they are in my way, how about 150 to your door?

tchevs · 08-24-2018, 10:16 AM

Quote:

Originally Posted by pimpston65

does it have a 6cyl fan shroud? if so and fiberglass whats your price?

No shroud, sorry

tchevs · 08-24-2018, 10:19 AM

Quote:

Originally Posted by j.kirn

Does the hood have the apache 40 emblems?

Pictures

**DPowers** · 08-25-2018, 07:53 PM

Quote:

Originally Posted by tchevs

You need them and they are in my way, how about 150 to your door?

Will have to think on it. I am looking to resell is the issue.

**cff** · 08-26-2018, 08:19 AM

I think I will pass on the rear diff. Thanks.

C40 · 08-30-2018, 09:17 PM

How much for the oval plate on the parking brake hole. I’m interested on the 12’ oem bed, will you please post pictures.

08-21-2018, 12:33 AM	#1
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 492	1961 C40 part out Parting this 1961 c40. I’m keeping front clip and doors for my 62. Cab has nice floor, nice corners, decent rockers, nice roof but has rust on the ceiling right above passenger door. Gas tank is gone, but most interior is still there. Bare cab $600 Steering Column $100 Gauge cluster $50 sold 19.5 wheels $200 Complete roller frame $300 Original 12’ bed. $500 sold 6cyl Engine $50 4speed tranny $50 All big items are pickup only, if you want any small items I can ship at your expense. Attached Images Last edited by tchevs; 12-30-2018 at 12:31 PM. Reason: Part sold

08-21-2018, 07:38 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: 1961 C40 part out I'd be interested in the cluster, knobs, ashtray, glovebox door (pending pics) and heater controls to 37843. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-21-2018, 11:23 PM	#3
Rolland Senior Member Join Date: Mar 2014 Location: Colorado Springs CO Posts: 215	Re: 1961 C40 part out I'll take the steering column assuming you can ship it. Also interested in the transmission brake assembly.

08-22-2018, 12:31 AM	#4
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 492	Re: 1961 C40 part out Hope pictures help. Attached Images

08-22-2018, 09:51 AM	#6
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 492	Re: 1961 C40 part out Do you want the drum that’s on the tranny as well? I want to make sure on exactly what you need Attached Images

08-22-2018, 10:42 AM	#7
Rolland Senior Member Join Date: Mar 2014 Location: Colorado Springs CO Posts: 215	Re: 1961 C40 part out Yes I would need the drum also, and if everything appears to be there and in decent condition, let me know what you need for it. Thanks. Shipping to 80917.

08-22-2018, 11:20 AM	#8
cff Active Member Join Date: Feb 2014 Location: langley BC Posts: 159	Re: 1961 C40 part out How bout a price to ship the rear diff 3rd member to 98264

08-22-2018, 11:01 PM	#12
Rolland Senior Member Join Date: Mar 2014 Location: Colorado Springs CO Posts: 215	Re: 1961 C40 part out Would you take $175 for the column and brake parts plus the $85 shipping for a total of $260 shipped? Thanks.

08-23-2018, 12:34 AM	#15
Rolland Senior Member Join Date: Mar 2014 Location: Colorado Springs CO Posts: 215	Re: 1961 C40 part out PM sent. Thank you.

08-23-2018, 11:24 PM	#18
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: 1961 C40 part out does it have a 6cyl fan shroud? if so and fiberglass whats your price?

08-23-2018, 11:59 PM	#19
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1961 C40 part out Does the hood have the apache 40 emblems?

08-26-2018, 08:19 AM	#24
cff Active Member Join Date: Feb 2014 Location: langley BC Posts: 159	Re: 1961 C40 part out I think I will pass on the rear diff. Thanks.

08-30-2018, 09:17 PM	#25
C40 Registered User Join Date: Jul 2016 Location: Las Vegas NV Posts: 24	Re: 1961 C40 part out How much for the oval plate on the parking brake hole. I’m interested on the 12’ oem bed, will you please post pictures.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.