Daughters 68 step... - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 11-22-2019, 09:22 AM

Quote:

Originally Posted by BigBird05

Thanks for the measurements guys! Now I know where to move the trailing arm cross member too. On the blueprint sheet the 0 line is the front of dash. All measurements are taken from this point. Forward( to the front) backward ( to the back).

All my measurements came off the back of the cab to rear of the frame. Both over all measurements where 75" so at least I know my cab is square!

Andy4639 · 11-22-2019, 09:24 AM

Quote:

Originally Posted by Getter-Done

Andy
I have been informed that EZ grind wire is the real deal.
I will refrain from using that (P) word
Pro that is.

I purchased some from my Local welding supply store.
I got it at a good price.
It's a little bit higher on e__ -Bay
I have not used it yet.
Because I am not to that point yet.
This is just a Suggestion.
This throwing that out there /

.

Yea don't like throwning that P word around a lot. I've been working on these trucks for over 30 years and I wouldn't call myself a pro by any stretch!

Andy4639 · 11-25-2019, 08:10 PM

I had a nice little surprise from another forum I post on this morning when I got up. Bangshift did a small write up on the 68. My daughter was tickled PINK!

https://bangshift.com/general-news/p...s-first-truck/

Today I started on the drivers side repair cutting out and heating up the what was left of the old rocker and backing plate to get it out.
Hope to have all this welding done by weeks end.
Not cutting out near as much on the cab corner on this side as we did on the other side.

2 Stovebolts · 11-25-2019, 08:42 PM

Andy...I give you a world of credit....projects like this totally burned me out....but the reward doing it for your daughter is priceless....Bless you.....

Andy4639 · 11-25-2019, 08:59 PM

Quote:

Originally Posted by 2 Stovebolts

Andy...I give you a world of credit....projects like this totally burned me out....but the reward doing it for your daughter is priceless....Bless you.....

Yes it does. I've had my moments but I just keep plugging away at it. Hope it's running by Christmas. Keeping my fingers crossed.

Andy4639 · 11-29-2019, 09:09 PM

Drivers side about done. Spent 8.5 hrs on it today cutting, grinding and welding metal. Oh did I mention grinding on it!
The door shuts good with good gap all around.
More filler welding and then more grinding it should be good.

ashx2 · 11-29-2019, 10:53 PM

It's coming along nicely. Keep bangin' away, Dec. 31 is just around the corner now!

Greg

Andy4639 · 12-02-2019, 08:28 PM

I really like these new push on door weather strips I got from GMC Pauls. They fit great and are super easy to install. All I did was scrap all the old sealer off and I had to tap the lip in a couple of places to insure they would grip the molding. They are great and I will be ordering another set for the 71C-10. I have a set for the ramp truck already.

I installed both door handles and adjusted both doors. They shut good and tight and the doors align good with the body.

Andy4639 · 12-05-2019, 08:24 PM

Door regulators and latches showed up. Waiting on the vent window rebuilding kit to get here to start back on the door's. I got the glass back in the frame for the side glass. I took one vent window a part to have it cleaned up and painted so I can get started with rebuilding it.

2 Stovebolts · 12-05-2019, 09:44 PM

Keep at it.....Can't wait to see progress in its entirety....

**Grumpy old man** · 12-07-2019, 10:19 AM

Are you going to paint it while it's completely stripped down ?

Andy4639 · 12-07-2019, 12:02 PM

Quote:

Originally Posted by Grumpy old man

Are you going to paint it while it's completely stripped down ?

Nope! It's a rust bucket kind of truck!Oh excuse me I mean patina truck!

I'm even thinking about stripping it down to bare metal and clearing it maybe.

Andy4639 · 12-11-2019, 10:08 PM

Drivers side door is done except for the inside panel, arm rest and new window crank. I also put the dash pad in and the wiring is back in the truck. Passenger side will be soon. I have to get the vent window done first though.
Question for ya'll though... The drivers side door shuts good and has no gaps that look out bad. But for the life of me I can not get the dang door to lock!!! What am I missing? The passenger side shuts and looks just fine. Any thoughts on this. I adjusted the sticker for over 2hrs today and it want lock. I can open the door and it locks just find no binding.

Andy4639 · 12-11-2019, 10:14 PM

I painted the inside heater box stuff and have the heater core in and it's all ready to install. I got the fan motor gasket today to.

Andy4639 · 12-17-2019, 07:29 PM

Got the passenger side window in and all the rubber seals installed. New door latch. Wired up the wiper switch, dimmer, key switch, starter and HEI. I cut the resistor wire right at the fuse block and added a normal wire to the cap. Got the ground straps hooked up to the frame cab and motor.

68 P.O.S. · 12-18-2019, 12:24 PM

Great progress Andy. Keep it up, it's looking good! I wish my progress could be as swift

Andy4639 · 12-18-2019, 07:30 PM

Quote:

Originally Posted by 68 P.O.S.

Great progress Andy. Keep it up, it's looking good! I wish my progress could be as swift

Thanks,
had another good day in the shop. Swapped the old rod gas pedal out to my old 71 cable pedal. Got the transmission cooler lines all done. Heater box is all done, cables and wired up. Got to install fan motor. Dash is temporarily hooked up to check electrical stuff out tomorrow. New fire wall & radiator plastic tray for wiring installed. Got to strip the wiring harness for the internal alternator and install the head light relays.

PanelDeland · 12-19-2019, 12:03 AM

That's coming along nicely Andy. Bet she's getting excited.

Happy_dan · 12-19-2019, 12:16 PM

I am always amazed at the things you all do! I stress about changing a window regulator.

Great job Andy, love following this thread.

2 Stovebolts · 12-19-2019, 12:49 PM

Its amazing how much you get done with a gun to your head, with a deadline....

**landarts** · 12-19-2019, 02:48 PM

Coming along really nice, cant wait to see the finished product. Good job!

Andy4639 · 12-23-2019, 08:16 PM

Got the drivers door latch replaced with new one installed Tilt column waiting on the DD/ to 36 spline union to show up to finish installing it. Got the heater box all back in and wiring harness is all hooked up. Lights are hooked up temperarly to try the wiring out.
I was told today I have until Jan 31 2020 to be done. I shouldn't have any problem with that.

2 Stovebolts · 12-23-2019, 08:27 PM

Wow..shaping up nice.....

Happy_dan · 12-24-2019, 08:44 AM

Great work on this one! So fast!

Andy4639 · 12-24-2019, 09:06 AM

Quote:

Originally Posted by Happy_dan

Great work on this one! So fast!

Thanks, I've been getting after it. I still have a ways to go but hopefully by the end of Jan. it will be under it's own power.

11-25-2019, 08:10 PM	#78
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... I had a nice little surprise from another forum I post on this morning when I got up. Bangshift did a small write up on the 68. My daughter was tickled PINK! https://bangshift.com/general-news/p...s-first-truck/ Today I started on the drivers side repair cutting out and heating up the what was left of the old rocker and backing plate to get it out. Hope to have all this welding done by weeks end. Not cutting out near as much on the cab corner on this side as we did on the other side. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-25-2019, 08:42 PM	#79
2 Stovebolts Registered User Join Date: Sep 2019 Location: chappaquiddick MA Posts: 137	Re: Daughters 68 step... Andy...I give you a world of credit....projects like this totally burned me out....but the reward doing it for your daughter is priceless....Bless you.....

11-29-2019, 09:09 PM	#81
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... Drivers side about done. Spent 8.5 hrs on it today cutting, grinding and welding metal. Oh did I mention grinding on it! The door shuts good with good gap all around. More filler welding and then more grinding it should be good. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-29-2019, 10:53 PM	#82
ashx2 Registered User Join Date: Aug 2008 Location: Graham, Texas Posts: 239	Re: Daughters 68 step... It's coming along nicely. Keep bangin' away, Dec. 31 is just around the corner now! Greg

12-02-2019, 08:28 PM	#83
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... I really like these new push on door weather strips I got from GMC Pauls. They fit great and are super easy to install. All I did was scrap all the old sealer off and I had to tap the lip in a couple of places to insure they would grip the molding. They are great and I will be ordering another set for the 71C-10. I have a set for the ramp truck already. I installed both door handles and adjusted both doors. They shut good and tight and the doors align good with the body. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-05-2019, 08:24 PM	#84
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... Door regulators and latches showed up. Waiting on the vent window rebuilding kit to get here to start back on the door's. I got the glass back in the frame for the side glass. I took one vent window a part to have it cleaned up and painted so I can get started with rebuilding it. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-05-2019, 09:44 PM	#85
2 Stovebolts Registered User Join Date: Sep 2019 Location: chappaquiddick MA Posts: 137	Re: Daughters 68 step... Keep at it.....Can't wait to see progress in its entirety....

12-07-2019, 10:19 AM	#86
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Daughters 68 step... Are you going to paint it while it's completely stripped down ? __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

12-11-2019, 10:08 PM	#88
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... Drivers side door is done except for the inside panel, arm rest and new window crank. I also put the dash pad in and the wiring is back in the truck. Passenger side will be soon. I have to get the vent window done first though. Question for ya'll though... The drivers side door shuts good and has no gaps that look out bad. But for the life of me I can not get the dang door to lock!!! What am I missing? The passenger side shuts and looks just fine. Any thoughts on this. I adjusted the sticker for over 2hrs today and it want lock. I can open the door and it locks just find no binding. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-11-2019, 10:14 PM	#89
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... I painted the inside heater box stuff and have the heater core in and it's all ready to install. I got the fan motor gasket today to. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-17-2019, 07:29 PM	#90
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... Got the passenger side window in and all the rubber seals installed. New door latch. Wired up the wiper switch, dimmer, key switch, starter and HEI. I cut the resistor wire right at the fuse block and added a normal wire to the cap. Got the ground straps hooked up to the frame cab and motor. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-18-2019, 12:24 PM	#91
68 P.O.S. Registered User Join Date: Jan 2007 Location: Puyallup, WA Posts: 1,661	Re: Daughters 68 step... Great progress Andy. Keep it up, it's looking good! I wish my progress could be as swift __________________ 72 C10 lwb fleetside -stock 350/350 combo

12-19-2019, 12:03 AM	#93
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Daughters 68 step... That's coming along nicely Andy. Bet she's getting excited. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

12-19-2019, 12:16 PM	#94
Happy_dan Registered User Join Date: Jul 2019 Location: New Boston, NH Posts: 456	Re: Daughters 68 step... I am always amazed at the things you all do! I stress about changing a window regulator. Great job Andy, love following this thread. __________________ 1968 C-20 CST Vermillion http://imageevent.com/happy_dan/dantoys/68c20 2019 Silverado 2012 Camaro ZL1

12-19-2019, 12:49 PM	#95
2 Stovebolts Registered User Join Date: Sep 2019 Location: chappaquiddick MA Posts: 137	Re: Daughters 68 step... Its amazing how much you get done with a gun to your head, with a deadline....



Register or Log In To remove these advertisements.

12-19-2019, 02:48 PM	#96
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,321	Re: Daughters 68 step... Coming along really nice, cant wait to see the finished product. Good job! __________________ 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 69 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

12-23-2019, 08:16 PM	#97
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... Got the drivers door latch replaced with new one installed Tilt column waiting on the DD/ to 36 spline union to show up to finish installing it. Got the heater box all back in and wiring harness is all hooked up. Lights are hooked up temperarly to try the wiring out. I was told today I have until Jan 31 2020 to be done. I shouldn't have any problem with that. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-23-2019, 08:27 PM	#98
2 Stovebolts Registered User Join Date: Sep 2019 Location: chappaquiddick MA Posts: 137	Re: Daughters 68 step... Wow..shaping up nice.....

12-24-2019, 08:44 AM	#99
Happy_dan Registered User Join Date: Jul 2019 Location: New Boston, NH Posts: 456	Re: Daughters 68 step... Great work on this one! So fast! __________________ 1968 C-20 CST Vermillion http://imageevent.com/happy_dan/dantoys/68c20 2019 Silverado 2012 Camaro ZL1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.