WY 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 01-29-2010, 09:20 PM

I'm going to part this Blazer out the following way:
Original paint CST A.C. bare tub, sheetmetal only. solid floors and rocker boxes, will need the usual rocker/lower panel work. $600
Very clean single wall top, no hatch. $450
3.73 geared rolling chassis, motor and T-case crossmembers set up for V8 auto. $600
I can store any of these pieces until spring to allow plenty of time to plan a trip. Thanks, Sharpie

*sharpie1972* · 01-29-2010, 09:21 PM

more pics

*sharpie1972* · 01-29-2010, 09:22 PM

more pics 2

**too much stuff** · 01-29-2010, 09:50 PM

Looks like a good start for some one. How much for the shifter rope?

badpeanut · 01-29-2010, 09:57 PM

Solid sheet metal!

FYI, I belive it is a '72 due to the rear frame horns, vent window screw, and single wall top.

*sharpie1972* · 01-29-2010, 10:08 PM

Too much stuff: shifter rope? That's keeping the door from flying open in the Wyoming wind!
Badpeanut: You are right it's a 72, I lost my internet connection and then flubbed the title on round 2.... luckily I had the rest of the description copied! Sharpie

1949gmc · 01-29-2010, 10:37 PM

You got any pictures of the bottom side? What kind of shape are the torsion boxes and related hardware in? Powell, WY can be treacherous to get to this time of year... good call on the 'storing til spring'!

*sharpie1972* · 01-29-2010, 10:41 PM

1949gmc: I'll try to "catch the light" tomorrow and get some underneath pics. The torsion boxes, etc. are excellent, factory paint and undercoat still adhered. Sharpie

1949gmc · 01-29-2010, 10:45 PM

Well, I'd be interested in it. Does it come with a title? Is the frame for sale the same one that the tub is on? I'm assuming that it is.

1956cameo · 01-29-2010, 10:46 PM

Sharpie, It looks like it still has the chrome strips that go along the top of CST side interior panels. If so, and if they are for sale and in good condition, how much for them shipped to 77584.

*sharpie1972* · 01-30-2010, 10:38 AM

1949gmc: This one came from a bodyshop auction. The owner died and his wife only had titles for some of his parts rigs, the rest were sold with bill of sale. Yes, the tub, frame, and top pictured are the ones for sale.
1956cameo: I will be getting more pics today and will let you know condition of the top strips.
Thanks, Sharpie

*sharpie1972* · 01-30-2010, 05:24 PM

1949gmc: Hi Ray, it got above freezing here today so I washed some of the Wyoming dust out of the tub. The only areas of rust I found other than the obvious rockers and lower 1/4's were drivers side lower kick panel and just starting at the rear of the bed. The floors are very solid, just surface rust. The underside, frame, and axles are very clean. The top is solid with no damage. Hope the pics help, Sharpie
1956cameo: The top rails for the panels are in poor shape. Thanks, Sharpie

*sharpie1972* · 01-30-2010, 05:29 PM

more pics

*sharpie1972* · 01-30-2010, 05:31 PM

more pics 2

*sharpie1972* · 01-30-2010, 05:32 PM

more pics 3

*sharpie1972* · 01-30-2010, 05:35 PM

more pics 4

*sharpie1972* · 01-30-2010, 05:40 PM

more pics 5

*sharpie1972* · 01-30-2010, 05:41 PM

more pics 6

**lks dcvn** · 01-30-2010, 05:49 PM

This isn't the other blazer rolling chassis that you were referring to here is it...since I never heard anything back.

http://67-72chevytrucks.com/vboard/s...d.php?t=382031

Guess I will hop in line...

*sharpie1972* · 01-30-2010, 05:55 PM

lks dcvn: It is the other rolling chassis and I have a nearly complete Jimmy on the way also. Thanks, Sharpie

Custom 68 · 01-30-2010, 06:09 PM

I sure could use that tub and top back in MO I ended up with a problem tub
looks good to me...
Dave

**lks dcvn** · 01-30-2010, 06:58 PM

so based on this and the other thread - what is the order of potential buyers for this tub/chassis/top - just so I know...I don't want to line jump anybody or get jumped either.

I am interested in buying a body/rolling chassis if the price and condition are right - I don't need a top for it. How is the Jimmy tub that is on the way - any issues that you know of rust wise. I don't need two tubs - just need one.

Thanks Sharpie -

*sharpie1972* · 01-30-2010, 07:14 PM

lks dcvn:1949gmc has first shot. You did express interest in seeing pictures of the 2nd rolling chassis once I got it in. I should have carefully read my first thread and sent you a PM letting you know that I started a new thread with pictures. That would have been the proper line of communication. I apologize for not letting you know that the pictures had been posted. Hopefully I am handling this correctly. I don't want to cause problems or create enemies, just trying to keep our 67-72's on the road. As far as the Jimmy goes the outside looks the same as this one, but I have not got it home to strip down the interior and check all areas. Thanks, Sharpie

**lks dcvn** · 01-30-2010, 07:25 PM

No worries Sharpie - just wanted to be sure -

My bet is 1949gmc will hop on this one for sure to get his Jimmy back on the road...nice buy 1949gmc

I will then call first dibs on the Jimmy rolling chassis then...pending pix and price.

Thx! Enjoy the rest of your weekend!

*sharpie1972* · 01-30-2010, 07:28 PM

lks dcvn: Thanks for being understanding... I swore I would not get in the middle of one of these deals, but it looks I was not careful enough. You certainly do have first dibs on the Jimmy for the same price and I will PM you and wait for a response so that you know the pictures are being posted. Thanks, Sharpie

01-29-2010, 09:20 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis I'm going to part this Blazer out the following way: Original paint CST A.C. bare tub, sheetmetal only. solid floors and rocker boxes, will need the usual rocker/lower panel work. $600 Very clean single wall top, no hatch. $450 3.73 geared rolling chassis, motor and T-case crossmembers set up for V8 auto. $600 I can store any of these pieces until spring to allow plenty of time to plan a trip. Thanks, Sharpie Attached Images

01-29-2010, 09:21 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis more pics Attached Images

01-29-2010, 09:22 PM	#3
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis more pics 2 Attached Images

01-29-2010, 09:50 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,694	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis Looks like a good start for some one. How much for the shifter rope? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-29-2010, 09:57 PM	#5
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,755	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis Solid sheet metal! FYI, I belive it is a '72 due to the rear frame horns, vent window screw, and single wall top. __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

01-29-2010, 10:08 PM	#6
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis Too much stuff: shifter rope? That's keeping the door from flying open in the Wyoming wind! Badpeanut: You are right it's a 72, I lost my internet connection and then flubbed the title on round 2.... luckily I had the rest of the description copied! Sharpie

01-29-2010, 10:37 PM	#7
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis You got any pictures of the bottom side? What kind of shape are the torsion boxes and related hardware in? Powell, WY can be treacherous to get to this time of year... good call on the 'storing til spring'!

01-29-2010, 10:41 PM	#8
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis 1949gmc: I'll try to "catch the light" tomorrow and get some underneath pics. The torsion boxes, etc. are excellent, factory paint and undercoat still adhered. Sharpie

01-29-2010, 10:45 PM	#9
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis Well, I'd be interested in it. Does it come with a title? Is the frame for sale the same one that the tub is on? I'm assuming that it is. Last edited by 1949gmc; 01-29-2010 at 10:55 PM. Reason: hopped up on cold meds

01-29-2010, 10:46 PM	#10
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis Sharpie, It looks like it still has the chrome strips that go along the top of CST side interior panels. If so, and if they are for sale and in good condition, how much for them shipped to 77584. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-30-2010, 10:38 AM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis 1949gmc: This one came from a bodyshop auction. The owner died and his wife only had titles for some of his parts rigs, the rest were sold with bill of sale. Yes, the tub, frame, and top pictured are the ones for sale. 1956cameo: I will be getting more pics today and will let you know condition of the top strips. Thanks, Sharpie

01-30-2010, 05:24 PM	#12
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis 1949gmc: Hi Ray, it got above freezing here today so I washed some of the Wyoming dust out of the tub. The only areas of rust I found other than the obvious rockers and lower 1/4's were drivers side lower kick panel and just starting at the rear of the bed. The floors are very solid, just surface rust. The underside, frame, and axles are very clean. The top is solid with no damage. Hope the pics help, Sharpie 1956cameo: The top rails for the panels are in poor shape. Thanks, Sharpie Attached Images

01-30-2010, 05:29 PM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis more pics Attached Images

01-30-2010, 05:31 PM	#14
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis more pics 2 Attached Images

01-30-2010, 05:32 PM	#15
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis more pics 3 Attached Images



Register or Log In To remove these advertisements.

01-30-2010, 05:35 PM	#16
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis more pics 4 Attached Images

01-30-2010, 05:40 PM	#17
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis more pics 5 Attached Images

01-30-2010, 05:41 PM	#18
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis more pics 6 Attached Images

01-30-2010, 05:49 PM	#19
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis This isn't the other blazer rolling chassis that you were referring to here is it...since I never heard anything back. http://67-72chevytrucks.com/vboard/s...d.php?t=382031 Guess I will hop in line...

01-30-2010, 05:55 PM	#20
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis lks dcvn: It is the other rolling chassis and I have a nearly complete Jimmy on the way also. Thanks, Sharpie

01-30-2010, 06:09 PM	#21
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,930	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis I sure could use that tub and top back in MO I ended up with a problem tub looks good to me... Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" Last edited by Custom 68; 01-30-2010 at 06:11 PM.

01-30-2010, 06:58 PM	#22
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis so based on this and the other thread - what is the order of potential buyers for this tub/chassis/top - just so I know...I don't want to line jump anybody or get jumped either. I am interested in buying a body/rolling chassis if the price and condition are right - I don't need a top for it. How is the Jimmy tub that is on the way - any issues that you know of rust wise. I don't need two tubs - just need one. Thanks Sharpie -

01-30-2010, 07:14 PM	#23
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis lks dcvn:1949gmc has first shot. You did express interest in seeing pictures of the 2nd rolling chassis once I got it in. I should have carefully read my first thread and sent you a PM letting you know that I started a new thread with pictures. That would have been the proper line of communication. I apologize for not letting you know that the pictures had been posted. Hopefully I am handling this correctly. I don't want to cause problems or create enemies, just trying to keep our 67-72's on the road. As far as the Jimmy goes the outside looks the same as this one, but I have not got it home to strip down the interior and check all areas. Thanks, Sharpie

01-30-2010, 07:25 PM	#24
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis No worries Sharpie - just wanted to be sure - My bet is 1949gmc will hop on this one for sure to get his Jimmy back on the road...nice buy 1949gmc I will then call first dibs on the Jimmy rolling chassis then...pending pix and price. Thx! Enjoy the rest of your weekend!

01-30-2010, 07:28 PM	#25
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 CST A.C. Blazer tub, single wall top, 3.73 rolling chassis lks dcvn: Thanks for being understanding... I swore I would not get in the middle of one of these deals, but it looks I was not careful enough. You certainly do have first dibs on the Jimmy for the same price and I will PM you and wait for a response so that you know the pictures are being posted. Thanks, Sharpie

Register or Log In To remove these advertisements.