TCI to start new R&D Project with a C10!

[dirtyjim]

will the parts be available separately? I'm interested in the c-notch/panhard & upper coilover mounts. right now I'm running an old cpp coilover setup on the rear of my truck but the upper mounts are set up for a 4" stroke coil-over and I'd like to upgrade to at least 5" stoke for more suspension travel and it looks like your upper mounts would be just about perfect. right now I have to run a stiffer spring than I would like to keep it from bottoming
I was going to fab my own but if I can get the yours without having to buy the whole setup that's the way i'll go, and more than likely end up with your complete rear set up before its all over.

back 20 years ago when I was a teenager I installed and helped install a lot of tci suspension parts at a little street rod shop near spring texas. I worked for free in return for left over parts. when I tubbed my 72 the narrowed rear axle, wheel tubs, wheels and 14/32 pro-tracs cost me a whole whopping $200 installed. sometimes working for free is good