Flush Fit Glass for 64-66 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fredhlynch2 · 09-30-2018, 02:49 AM

I was looking at some photos of a 66 C10 at a car show. Anyway it had what appeared to be flush fit glass for a windshield and the big back window (no gaskets). Anyone know who makes this? It sure looked super clean!

**Clyde65** · 09-30-2018, 10:30 AM

Curious, I’d like to see that!

Grounded63 · 09-30-2018, 02:16 PM

It's probably not who makes it, but what shop fabricated / built it.

**The Rocknrod** · 09-30-2018, 02:51 PM

Quote:

Originally Posted by Grounded63

It's probably not who makes it, but what shop fabricated / built it.

Exactly.

Hack_Attack · 10-01-2018, 11:21 AM

https://www.shopfesler.com/flush-mou...-10-truck-kit/

I don't see 64-66 but they make 67-72 and the square bodies also. Maybe what you saw was from the same company and was sort of a "prototype"?

I once saw in a magazine, this look was accomplished by welding sheet metal on the pillars to meet up with the stock glass and the glass was mounted with butyl tape. I dont really remember the details but that was the gist of it.

09-30-2018, 02:49 AM	#1
fredhlynch2 Registered User Join Date: Mar 2014 Location: Fond du Lac, wi Posts: 91	Flush Fit Glass for 64-66 C10 I was looking at some photos of a 66 C10 at a car show. Anyway it had what appeared to be flush fit glass for a windshield and the big back window (no gaskets). Anyone know who makes this? It sure looked super clean!

09-30-2018, 10:30 AM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: Flush Fit Glass for 64-66 C10 Curious, I’d like to see that! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-30-2018, 02:16 PM	#3
Grounded63 Registered User Join Date: Dec 2016 Location: Canon City, Colorado Posts: 67	Re: Flush Fit Glass for 64-66 C10 It's probably not who makes it, but what shop fabricated / built it.

10-01-2018, 11:21 AM	#5
Hack_Attack Registered User Join Date: May 2017 Location: Amelia Island, Florida Posts: 43	Re: Flush Fit Glass for 64-66 C10 https://www.shopfesler.com/flush-mou...-10-truck-kit/ I don't see 64-66 but they make 67-72 and the square bodies also. Maybe what you saw was from the same company and was sort of a "prototype"? I once saw in a magazine, this look was accomplished by welding sheet metal on the pillars to meet up with the stock glass and the glass was mounted with butyl tape. I dont really remember the details but that was the gist of it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.