|
12-16-2017, 08:00 PM
|
#1 |
|
Registered User
Join Date: Dec 2017
Location: Tabor City NC
Posts: 2
|
6 lug to 5 lug ???
So i'm trying to find out the easiest way to go from 6 to 5 lug. I've been told I can drop in a 71 to 72 rear. I thought I could buy new axles but not exactly sure what to order. I have a stock 67 c-10 rear in truck now. Any help on which way to go would great!!!
Thanks! |
|
|
|
12-16-2017, 08:27 PM
|
#2 |
|
Registered User
 Join Date: Apr 2017
Location: Portland, Oregon
Posts: 184
|
Re: 6 lug to 5 lug ???
My dad and I spent a Saturday bolting in a rear end from a 1972 truck, the only difference is about an inch in width (I forgot which is shorter). Assuming you have trailing arm rear suspension the hardest part was freeing up the rusty bolts.
|
|
|
|
|
12-16-2017, 09:04 PM
|
#3 |
|
Registered User
Join Date: Dec 2017
Location: Tabor City NC
Posts: 2
|
Re: 6 lug to 5 lug ???
Ok cool,thank you. Just need to find one.
I found axles on ebay but just not sure if they are the right ones. |
|
|
|
|
12-16-2017, 10:18 PM
|
#4 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
|
Re: 6 lug to 5 lug ???
Speedway Motors (among others) sells and axle/brake drum kit for less than $400 to convert yours. Just know that 67-70e and 70l-72 have different length axles and housings.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
12-17-2017, 01:20 PM
|
#5 |
|
Registered User
Join Date: Aug 2002
Location: philadelphia
Posts: 62
|
Re: 6 lug to 5 lug ???
I had a machine shop re drill my axles for 5 lug. I think they also had to machine down the hub a little. Was pretty reasonable.
|
|
|
|
|
12-17-2017, 03:22 PM
|
#6 |
|
Registered User
Join Date: Sep 2016
Location: Brentwood CA
Posts: 180
|
Re: 6 lug to 5 lug ???
I just replaced front 6 lug rotors to 5 lug rotors and replaced the rear axles to 5 lug, easy swap and not too expensive. I ordered everything from ECE.
|
|
|
|
|
12-17-2017, 10:13 PM
|
#7 |
|
Registered User
Join Date: Oct 2014
Location: Noblesville, IN
Posts: 103
|
Re: 6 lug to 5 lug ???
If you haven't done so, you will need to convert to disk brakes up front. I would suggest getting spindles that will use your existing ball joints and tie rod ends. ECE has what you need. Rotors can be bought just about anywhere, 71-83 all use the same rotor.
I just bought a rear axle conversion kit that includes Axles, bearings, seals, wheel studs and brake drums from Summit for my 69. I went ahead and replaced the rear shoes, wheel cylinders and brake hardware also |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
