The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-01-2012, 10:44 AM   #1
Steve Hafner
Registered User
 
Steve Hafner's Avatar
 
Join Date: Sep 2010
Location: Northport, Alabama
Posts: 1,353
Correct Valve Cover Decal - BLAZER - JIMMY

I'm doing research to have a "correct" valve cover decal made for my 70 C-10 pickup's original 350 4 BBL engine. I started a thread over in the pick up section a few months ago and got quite a bit of new information. I thought I'd ask over in the Blazer/Jimmy area to see if anyone here can ad anything. So far, I believe the "8 350" decal seen in the first picture below, from the 70 C-10 with 80 miles that was for sale a couple of years ago, is the correct one for my engine. It did NOT have a decal on the drivers side. The second picture below, is said to be a 72 GMC from an article in a service bulletin when it was new. The third picture below, shows an original 71 307's decal that I personally took pictures of a few weeks ago. It also did NOT have any remains of a decal on the driver's side.

My main questions are:

1) Does anyone have a Blazer or Jimmy with any portion of it's original valve cover decal still intact ? ( 69 through 72 and ANY cubic inch ) I'd like to see a picture of it, even if it doesn't look like the ones I've posted. I realize that Blazer/Jimmy decals could have been different from the factory then the decals on a pick up.

2) Does anyone remember seeing one of these in the past . . . and did they only come on the passenger side valve cover ?

. . . .
Attached Images
   

Last edited by Steve Hafner; 10-28-2012 at 05:07 PM.
Steve Hafner is offline   Reply With Quote
Old 10-26-2012, 10:47 AM   #2
jc06vmax
Registered User
 
jc06vmax's Avatar
 
Join Date: Aug 2012
Location: Hartford, TN
Posts: 56
Re: Correct Valve Cover Decal - BLAZER - JIMMY

Bump.

I don't have any info but I'm interested to see who does...
jc06vmax is offline   Reply With Quote
Old 08-21-2013, 12:26 AM   #3
bouncytruck
SKINNY TIRES RULE!
 
bouncytruck's Avatar
 
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,049
Re: Correct Valve Cover Decal - BLAZER - JIMMY

My engine is bone stock and doesn't have any valve cover stickers. Not a great picture, but you can see the valve covers don't have stickers. I guess they could have been removed, but it only had 103K when I bought it 10 years ago.
Attached Images
 
__________________
bouncytruck 1972 K5
The Hauler 1994 K1500 Suburban
The Daily2010 Kia Soul
Wife's Ride2014 Fiat 500L
bouncytruck is offline   Reply With Quote
Old 08-21-2013, 08:22 AM   #4
Steve Hafner
Registered User
 
Steve Hafner's Avatar
 
Join Date: Sep 2010
Location: Northport, Alabama
Posts: 1,353
Re: Correct Valve Cover Decal - BLAZER - JIMMY

Quote:
Originally Posted by bouncytruck View Post
My engine is bone stock and doesn't have any valve cover stickers. Not a great picture, but you can see the valve covers don't have stickers. I guess they could have been removed, but it only had 103K when I bought it 10 years ago.
. . . .

Thanks !!! From pictures I've seen, the 8 307 and 8 350 decals only came on the passenger side and most only lasted the first year or two because of the heat.

I saw a 8 307 decal last year ( pictured below ) on a 71 that was still in pretty good shape. There were no "remains" on the driver's side.

. . . .
Attached Images
 
Steve Hafner is offline   Reply With Quote
Old 08-21-2013, 12:03 PM   #5
briank
Registered User
 
Join Date: Sep 2011
Location: Leland, Il
Posts: 1,503
Re: Correct Valve Cover Decal - BLAZER - JIMMY

Steve, I may be mistaken but I think there was this decal on the pass side of a 69 Firetruck that just sold at auction. If you loook under the 67-72 truck side and go a few pages back it should be there. I have a 72 K5 all original , Ill go look to see if there is anything there. I just picked this one up about a month ago and havent really looked yet.
briank is offline   Reply With Quote
Old 08-21-2013, 12:35 PM   #6
Steve Hafner
Registered User
 
Steve Hafner's Avatar
 
Join Date: Sep 2010
Location: Northport, Alabama
Posts: 1,353
Re: Correct Valve Cover Decal - BLAZER - JIMMY

Quote:
Originally Posted by briank View Post
Steve, I may be mistaken but I think there was this decal on the pass side of a 69 Firetruck that just sold at auction. If you loook under the 67-72 truck side and go a few pages back it should be there. I have a 72 K5 all original , Ill go look to see if there is anything there. I just picked this one up about a month ago and havent really looked yet.
. . . .

You are right . . . it did have a decal, it's just not the one I'm looking for.

The one on the 69 fire truck is on the left, below.

It's like the one I bought for my 70 on the right, below.

I believe that the one on the fire truck WAS the original decal.

I'm looking for pictures of the "8 350" or "8 307" decals that I believe came on the 70 and 71 engines .

. . . .
Attached Images
 
Steve Hafner is offline   Reply With Quote
Old 09-29-2013, 10:58 AM   #7
Steve Hafner
Registered User
 
Steve Hafner's Avatar
 
Join Date: Sep 2010
Location: Northport, Alabama
Posts: 1,353
Re: Correct Valve Cover Decal - BLAZER - JIMMY

Quote:
Originally Posted by briank View Post
Steve, I may be mistaken but I think there was this decal on the pass side of a 69 Firetruck that just sold at auction. If you loook under the 67-72 truck side and go a few pages back it should be there. I have a 72 K5 all original , Ill go look to see if there is anything there. I just picked this one up about a month ago and havent really looked yet.
. . . .

Brian, have you had a chance to look at your 72's valve cover yet ?
Steve Hafner is offline   Reply With Quote
Old 09-30-2013, 11:59 AM   #8
briank
Registered User
 
Join Date: Sep 2011
Location: Leland, Il
Posts: 1,503
Re: Correct Valve Cover Decal - BLAZER - JIMMY

Steve, no sticker on the 72 k5 350. I have a 71 350 out of a c20 that has the partial 8 350 sticker I believe.
Posted via Mobile Device
briank is offline   Reply With Quote
Old 09-30-2013, 05:19 PM   #9
Steve Hafner
Registered User
 
Steve Hafner's Avatar
 
Join Date: Sep 2010
Location: Northport, Alabama
Posts: 1,353
Re: Correct Valve Cover Decal - BLAZER - JIMMY

Quote:
Originally Posted by briank View Post
Steve, no sticker on the 72 k5 350. I have a 71 350 out of a c20 that has the partial 8 350 sticker I believe.
Posted via Mobile Device
Thanks for looking . . . could you take a picture of what still left on the C20 ?
__________________
. . . .

Life is short . . . we only have, right now.

. . . .

My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526
Steve Hafner is offline   Reply With Quote
Reply

Bookmarks

Tags
valve cover decal, valve cover sticker

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com