Frame swap 63 Chevy to 65 GMC? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vanhow10 · 03-17-2017, 07:12 PM

I have some really bad sections on my 65 GMC frame, but I want to save my GMC 4x4. I have access to a 63 Chevy frame (both were long beds).

Other than the changes due to the differing suspension and front axle, is there any show stopper differences between a 63 Chevy long frame and a 65 GMC long frame? Thanks.

**Captainfab** · 03-18-2017, 12:03 AM

It sounds like the '63 frame is a 2wd? If so the 2wd frames are slightly different than the 4wd frames, but it is doable. The other thing is that your frame VIN will no longer match the cab VIN. That may or may not be an issue in your area. You might check into that before hand.

padresag · 03-18-2017, 12:15 AM

I don't know if anyone has come up with frame numbers on a GMC.re have been discussions on that.
he would better off with a GMC 2 wheel frame as it already has semi elliptics on the rear
ron

vanhow10 · 03-18-2017, 08:13 AM

Thanks for the information, looks like I should look for a GMC frame or get prepared for some serious welding.

GMDad · 03-18-2017, 08:23 AM

My buddy went the other way around. He liked the 63 cab and put it on his 65 frame and IIRC he had to modify the cap supports on the frame a bit but not a real big job.

03-17-2017, 07:12 PM	#1
vanhow10 Registered User Join Date: Sep 2013 Location: Moore, OK Posts: 12	Frame swap 63 Chevy to 65 GMC? I have some really bad sections on my 65 GMC frame, but I want to save my GMC 4x4. I have access to a 63 Chevy frame (both were long beds). Other than the changes due to the differing suspension and front axle, is there any show stopper differences between a 63 Chevy long frame and a 65 GMC long frame? Thanks.

03-18-2017, 12:03 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Frame swap 63 Chevy to 65 GMC? It sounds like the '63 frame is a 2wd? If so the 2wd frames are slightly different than the 4wd frames, but it is doable. The other thing is that your frame VIN will no longer match the cab VIN. That may or may not be an issue in your area. You might check into that before hand. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-18-2017, 12:15 AM	#3
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Frame swap 63 Chevy to 65 GMC? I don't know if anyone has come up with frame numbers on a GMC.re have been discussions on that. he would better off with a GMC 2 wheel frame as it already has semi elliptics on the rear ron

03-18-2017, 08:13 AM	#4
vanhow10 Registered User Join Date: Sep 2013 Location: Moore, OK Posts: 12	Re: Frame swap 63 Chevy to 65 GMC? Thanks for the information, looks like I should look for a GMC frame or get prepared for some serious welding.

03-18-2017, 08:23 AM	#5
GMDad Registered User Join Date: Aug 2008 Location: Caledonia Ont Posts: 137	Re: Frame swap 63 Chevy to 65 GMC? My buddy went the other way around. He liked the 63 cab and put it on his 65 frame and IIRC he had to modify the cap supports on the frame a bit but not a real big job.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.