The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-06-2018, 05:36 PM   #1
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
Decisions on quality vs quantity

Hey guys,

I'm looking for some advice from folks who have been in my position before. I got a few projects. A 76 c10 90% restored and a 69 c10 with no frame. I have a 78 K10 frame with a 454 4 speed just waiting for a body. Original plan was to modify the frame for the 69 and have that be my tow/stump puller while my cruiser would be the 76 c10.

Lately ive been tempted to swap frames with the squarebody and have a all in one truck and sell off the 69. I'm not opposed to fab work but I'm wondering if any of you guys consolidated some.of your projects to focus on really good truck and were you happy about it in the end? Thanks for the input.
__________________
Andrew

1953 3100 235 T5
1985 K5 Blazer 350 700R4 208

Last edited by 73kay; 12-06-2018 at 06:23 PM.
73kay is offline   Reply With Quote
Old 12-06-2018, 07:24 PM   #2
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,608
Re: Decisions on quality vs quantity

You would need a body lift kit to make the 69 cab clear the gas tank hump of the newer frame. I believe wheel base is longer that that of the 69, so unless you are running a flatbed, there maybe some chopping that needs done.
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 12-06-2018, 10:14 PM   #3
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
Re: Decisions on quality vs quantity

Ya I've been researching what folks have done for the frame. Found some good ways to work it. I got a welder and knew that going in.
__________________
Andrew

1953 3100 235 T5
1985 K5 Blazer 350 700R4 208
73kay is offline   Reply With Quote
Old 12-07-2018, 01:21 PM   #4
liftlawssuck
Registered User
 
liftlawssuck's Avatar
 
Join Date: Mar 2011
Location: MA
Posts: 353
Re: Decisions on quality vs quantity

I have been in a somewhat similar position with my projects. 79 K10, 71 K10. 71 I had been gathering parts for the last 20 years to someday restore it and drive it. 79 was my daily driver till 2004 then stripped it down. 79 was going to get restored to show room and as well the 71. Well as time went on and money is tight things have changed. I continued to restore my 79 as if it were new with what I want to do to it. The 71 I decided to put it all together as I had 98% of everything I needed but no money for full blown resto at the same time as my 79. So now the 71 is just about done and it has been a blast to put it all together with super clean parts and make everything work as it should. I'm hoping next year to put it on the road. It's more of the rad rod look but super solid. Just every body panel is a different color. My 79 is coming along slowly but getting there. And I'm ok with that.

So I had altered my plans a bit and glad I did as I would have never gotten the 71 to the point it's at for a long time.

Not sure if this helps or not but that was my journey.
liftlawssuck is offline   Reply With Quote
Old 12-07-2018, 01:22 PM   #5
swb4me
Registered User
 
Join Date: Sep 2015
Location: SE Idaho
Posts: 147
Re: Decisions on quality vs quantity

I think it depends on what you really want to own and drive? Having mutiple projects going at the same time is a bit overwhelming. I always have a driver and it's never sold until I have another one ready to drive. I only have one project in progress at a time. I often own several other project vehicles, but they have to wait their turn or they get sold.

With that said, I would finish the 76 asap and then decide if you want to keep/finish the other projects. Stay focused on the 76 until it's a driver.
swb4me is offline   Reply With Quote
Old 12-07-2018, 02:43 PM   #6
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
Re: Decisions on quality vs quantity

The 76 just needs the bed reshot with paint and a few cosmetics. My 53 is my wife's cruiser and gonna stay family stock. I everything I need except to do the bodywork. I'll have to do a lot of body work and mods with the k10, so that's a long term project. I have just been having the temptation to convert the 76 to 4x4 and have the 53 as the cruiser. Space isn't an issue.

I just might one of those guys that prefers 51% of the time to working on projects than driving them, haha Thanks for the feedback.
__________________
Andrew

1953 3100 235 T5
1985 K5 Blazer 350 700R4 208
73kay is offline   Reply With Quote
Old 12-07-2018, 05:44 PM   #7
andyh1956
Registered User
 
Join Date: Mar 2010
Location: thomastown mississippi
Posts: 1,261
Re: Decisions on quality vs quantity

Remember this:
"If You Trade Your Stuff For Money, You Will Spend The Money & Then You Won't Have The Money OR The stuff!"
andyh1956 is offline   Reply With Quote
Old 12-07-2018, 05:59 PM   #8
rgunlock
Senior Member
 
rgunlock's Avatar
 
Join Date: Jul 2009
Location: Tomball, Texas
Posts: 1,592
Re: Decisions on quality vs quantity

[QUOTE=73kay;8400785]
I just might one of those guys that prefers 51% of the time to working on projects than driving them, /QUOTE]

At home on my own time, I prefer to finish large projects before I start another for fear that I'd never finish any of them. Problem is that I'm kinda like you in that I apparently prefer to work on them. I've had my next project truck sitting in the driveway for 5 years but can't seem to call the current '78 project done even though I've been daily driving it on and off for about a year now. I just keep finding that "one more thing" I want to do to it. Starting to run out of one more things though...
__________________
Rick

78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel
71 GMC C25 350/TH400 - Project Angie
59 Chevy SWB Stepside (next in line? Not sure now )
2001 GMC Sierra K2500
rgunlock is offline   Reply With Quote
Old 12-10-2018, 01:44 PM   #9
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
Re: Decisions on quality vs quantity

Quote:
Originally Posted by andyh1956 View Post
Remember this:
"If You Trade Your Stuff For Money, You Will Spend The Money & Then You Won't Have The Money OR The stuff!"
haha I like your thinking!
__________________
Andrew

1953 3100 235 T5
1985 K5 Blazer 350 700R4 208
73kay is offline   Reply With Quote
Old 12-10-2018, 01:59 PM   #10
DieselSJ
Registered User
 
Join Date: Jun 2016
Location: Phoenix, AZ
Posts: 574
Re: Decisions on quality vs quantity

The problem I have is that when I have too many project cars/trucks, then I don't seem to make progress on any. I've slimmed down to my daily driven Jeep, the R30 (which is somewhat of a project, but I keep it driveable) and my full Jeep SJ project. When the Jeep project is done, then I'll find another project.
__________________
87 R30 CC Dually, TBI 454, NV4500, zero rust barn find
87 Jeep Grand Wagoneer, 6.5 turbodiesel, 700R4
DieselSJ is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com