superlift 6 inch lift for 67-72 3/4 ton

[boonedogs72]

thanks learn something every day around here.

[boonedogs72]

Originally Posted by BurnoutNova

1926 Q st
lincoln, ne
68510

business address also, if that matters

shipping would be right around 170

[72blazer_mud_bogger]

are you all still trying to part it all out or can we still get ahold of the lift kit comlete, also i didnt see any lift blocks with the kit

[boonedogs72]

im trying to sell the kit as a hole. But i will sell it however. No blocks are included with the kit i used them on the new kit i put on the pickup.

[BurnoutNova]

Originally Posted by special-K

In lift kits the 1/2t and 3/4t springs are the same.

a bit off topic, but... do softride lift springs actully flex a bit more than stock 3/4 springs when say pulling a heavy car trailor? i want to lift my K10 maybe 4-6" but want to keep the load capacity... (i think i have either 3/4 or 1T rear springs now) i can haul almost 4000 lbs in the bed and not be flexed all the way out... i know it shouldnt hold that much but it does! it does ride like sh*t too

[BurnoutNova]

Originally Posted by boonedogs72

im trying to sell the kit as a hole. But i will sell it however. No blocks are included with the kit i used them on the new kit i put on the pickup.

so the rear springs are stock springs? i thought this was an all-spring lift, but after looking closer they do look stock??

[boonedogs72]

no i think they had like a 2 inch block in back. They look like one set is skyjacker and the other is superlift.

[boonedogs72]

the spring eyes are 1 1/8 inch may be one inch but closer to 1 1/18.

[boonedogs72]

Originally Posted by BurnoutNova

a bit off topic, but... do softride lift springs actully flex a bit more than stock 3/4 springs when say pulling a heavy car trailor? i want to lift my K10 maybe 4-6" but want to keep the load capacity... (i think i have either 3/4 or 1T rear springs now) i can haul almost 4000 lbs in the bed and not be flexed all the way out... i know it shouldnt hold that much but it does! it does ride like sh*t too

the rear springs look like superlift the front are skyjacker. The superlift springs are pretty stiff the truck didnt ride bad but they are a heavy spring.

[highrpm]

Im interested in the dropped steering arm if you want to sell in pieces.

Thanks

[boonedogs72]

if i have buyers for everyting else then its yours but i want to keep it togeather for now

[BurnoutNova]

so just to get this straight ( and i know im not 1st in line, just wanted to ask anyway)

what else will i need ?

blocks 2" or so?
u bolts
shocks

anything else?

[boonedogs72]

that should do it. No one has made any offers so you are first in line if you want to be.

[Blue_71]

boone, if its still at me/jamie, were discussing options on how much we can each go on it. i should be able to give you an answer or an offer by tomarow night

[boonedogs72]

yeah ill wait tell tomorrow for an answer from you.

thanks boonie

[Blue_71]

ok, we came up with a number.

$315 shipped for the front springs, rear springs, and the drop drag link. you keep the steering gear to save on shipping cost

[boonedogs72]

the lowest i could go would be 340 shipped thats still a pretty good deal for the two of you.

[Blue_71]

one more question before i give a definate-- you said you had 2" blocks on top of these springs, but it is a 6" lift. does that mean the rear springs are a 4" set of springs maybe, and they put the 2" blocks to have 6"?

[boonedogs72]

im not sure i will measure the springs on monday maybe that will answer some questions.

[72blazer_mud_bogger]

yeah it should be 4in with 2 in blocks which you can put above or below the the springs. that is how most 6in kits work to my knowledge

[boonedogs72]

i think i can get some skyjaker shocks for whoever is interested in the kit they are used but in good shape i may have some new 2 inck blocks also just have to take a look. Hell of a deal for someone wish shipping wasnt so exspensive

[72blazer_mud_bogger]

so do you still not have a definite buyer for the lift kit as a whole which now includes shocks. you said you do have the rear blocks as well? if not can you give me an idea of what it would cost to ship to 22407

[boonedogs72]

looks like it would be around 180. still no serious buyers

[72blazer_mud_bogger]

with shipping what am i lookin at for a grand total. tryin to see if i can scrape the money together, also would it be any cheaper if i had it shipped to the shop i work at

[boonedogs72]

360 shipped that was a buisness delivery