How about some pics of '73-'87 Short Beds - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spray-Bomb · 06-28-2008, 11:40 PM

This is my 77 project, soon to be driver

dieselarmy13 · 06-29-2008, 12:50 AM

Looks like a great start, sparybomb. Keep us posted.

80FOUR · 06-29-2008, 05:02 PM

1984 Scottsdale. power windows, door locks, A/C and cruise control

Spray-Bomb · 06-29-2008, 06:48 PM

Quote:

Originally Posted by dieselarmy13

Looks like a great start, spray-bomb. Keep us posted.

I started a build thread for it, so you can go check it out

Build Thread

dooce · 07-02-2008, 11:25 PM

I posted my truck in here before, but I just got finished with the drop, so here it is again. 4/6 drop from western chassis. 2.5" spindles, 1.5" springs, 4" drop leafs, and 2" shackles. also installed belltech street performance shocks on all four corners. I like it, but I'm thinking about raising the rear up an inch. the shackles have two settings, 1" drop and 2" drop. What do you think?

80FOUR · 07-02-2008, 11:30 PM

I'd say drop the rear another inch. Loose the rake!

GMBowtie79 · 07-02-2008, 11:34 PM

Lower, lower Go down another 1"-2". Thats just my $.02.

moneyeater · 07-03-2008, 12:58 PM

Quote:

Originally Posted by dooce

I posted my truck in here before, but I just got finished with the drop, so here it is again. 4/6 drop from western chassis. 2.5" spindles, 1.5" springs, 4" drop leafs, and 2" shackles. also installed belltech street performance shocks on all four corners. I like it, but I'm thinking about raising the rear up an inch. the shackles have two settings, 1" drop and 2" drop. What do you think?

That looks great! Did you do the job at the base?
When are we going to meet?
Volker

Richard D · 07-03-2008, 02:30 PM

I sure wouldn't raise it. I think they look best with just a slight rake; where the distance from the top of the wheel to the fender lip is the same front and rear.

jchav62 · 07-03-2008, 04:04 PM

I say leave it. That slight rake looks good...

dooce · 07-03-2008, 04:09 PM

QUOTE=GMBowtie79;2790934]Lower, lower Go down another 1"-2". Thats just my $.02.[/QUOTE]

I would love to, but my ground clearance is an issue. It needs 6" to be able to be shipped. Once I get it, I might.

Quote:

Originally Posted by moneyeater

That looks great! Did you do the job at the base?
When are we going to meet?
Volker

No, the truck is not here yet. It is still back home in oklahoma. I went to order the parts and the company would not ship to my APO box, so the only way for me to get them would be to give them my German address, which would cost me an extra $300-$400, so a buddy put it all together for me.

My truck should be getting shipped within the next few weeks, so by the time it gets here it will be toward the end of August, early September. It should of already been here, but there have been a few problems getting the truck to the shipping yard. When it gets here, I will get in touch and we'll go cruise or something. Know anyone else with these trucks that might wanna go with us?

SCOTTROD · 07-04-2008, 11:27 AM

Heres mine:

86swb · 07-04-2008, 12:51 PM

Would love to see more pictures of your truck Scottrod.

moneyeater · 07-04-2008, 02:18 PM

Quote:

Originally Posted by dooce

QUOTE=GMBowtie79;2790934]Lower, lower Go down another 1"-2". Thats just my $.02.

I would love to, but my ground clearance is an issue. It needs 6" to be able to be shipped. Once I get it, I might.

No, the truck is not here yet. It is still back home in oklahoma. I went to order the parts and the company would not ship to my APO box, so the only way for me to get them would be to give them my German address, which would cost me an extra $300-$400, so a buddy put it all together for me.

My truck should be getting shipped within the next few weeks, so by the time it gets here it will be toward the end of August, early September. It should of already been here, but there have been a few problems getting the truck to the shipping yard. When it gets here, I will get in touch and we'll go cruise or something. Know anyone else with these trucks that might wanna go with us?[/QUOTE]

Sure there´s a buddy who has a K5 and a C10 under construction and he sells billett goodies and cool stuff. (www.cooleparts.com)
And there´s a boardmember from Krefeld with a long stepper thats los-lowrider and another member in southgermany with a great 68 C10 thats blukangoo (www.v8brothers.de) and another member is rob73-87!I think it would be great to make a german boardmeet!
I hope i´ll get mine thru TÜV and the LPG system soon,that i can cruise it!

SCOTTROD · 07-05-2008, 11:39 AM

heres some more:

86swb · 07-05-2008, 02:16 PM

That is one nice truck.

Robertw · 07-05-2008, 03:56 PM

Quote:

Originally Posted by SCOTTROD

heres some more:

man scottrod thats one slick truck whats it look like under the hood

MickMc · 07-05-2008, 04:29 PM

Quote:

Originally Posted by SulphurDave

Mine updated

How did you get that dash pad so smooothee and shinny?

Mick

watahyahknow · 07-05-2008, 05:23 PM

like the interiour on that one

SCOTTROD · 07-06-2008, 12:47 AM

Quote:

Originally Posted by 86swb

That is one nice truck.

Thanks man!!

SCOTTROD · 07-06-2008, 01:12 AM

Quote:

Originally Posted by Robertw

man scottrod thats one slick truck whats it look like under the hood

Thanks alot!! Heres one:

gafiredog · 07-06-2008, 05:28 PM

beautiful truck scottrod !!!!

SCOTTROD · 07-06-2008, 10:35 PM

Quote:

Originally Posted by gafiredog

beautiful truck scottrod !!!!

Thank you!!

SCOTI · 07-07-2008, 11:57 PM

I put the Coys that I bought for my 68 on for the weekend & took it up to Kellers the local burger/cruise joint. I figured a few pics w/the new shoes were good for sharing . . .....

upon1 · 07-08-2008, 09:51 AM

wow that is a deadly truck! what is your suspension setup and tire sizes??

06-28-2008, 11:40 PM	#776
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: How about some pictures of '73-'87 short beds This is my 77 project, soon to be driver __________________ Just not low enough... ----------------------------- Sinister Killer

06-29-2008, 12:50 AM	#777
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: How about some pictures of '73-'87 short beds Looks like a great start, sparybomb. Keep us posted. __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

06-29-2008, 05:02 PM	#778
80FOUR Registered User Join Date: Jun 2008 Location: Meridian, MS Posts: 54	Re: How about some pictures of '73-'87 short beds 1984 Scottsdale. power windows, door locks, A/C and cruise control Attached Images

07-02-2008, 11:25 PM	#780
dooce Registered User Join Date: Aug 2007 Location: Tinker, OK Posts: 369	Re: How about some pictures of '73-'87 short beds I posted my truck in here before, but I just got finished with the drop, so here it is again. 4/6 drop from western chassis. 2.5" spindles, 1.5" springs, 4" drop leafs, and 2" shackles. also installed belltech street performance shocks on all four corners. I like it, but I'm thinking about raising the rear up an inch. the shackles have two settings, 1" drop and 2" drop. What do you think? Attached Images __________________ 1976 Chevy 1/2T 2wd SWB 327/Saginaw 4spd 3.73:1 LQ4 6.0/T56 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=772071 LFSalleeII@gmail.com

07-02-2008, 11:30 PM	#781
80FOUR Registered User Join Date: Jun 2008 Location: Meridian, MS Posts: 54	Re: How about some pictures of '73-'87 short beds I'd say drop the rear another inch. Loose the rake!

07-02-2008, 11:34 PM	#782
GMBowtie79 Surviving, one day at a time! Join Date: Jan 2008 Location: Turlock,CA Posts: 295	Re: How about some pictures of '73-'87 short beds Lower, lower Go down another 1"-2". Thats just my $.02. __________________ 79 Burb,350,tremic 5 spd, 4 wheel disc, daily driver 74 swb,350,350,driver & future project "There's no such thing as a finished project"

07-03-2008, 02:30 PM	#784
Richard D Registered User Join Date: Jun 2008 Location: Texas Ctiy TX Posts: 228	Re: How about some pictures of '73-'87 short beds I sure wouldn't raise it. I think they look best with just a slight rake; where the distance from the top of the wheel to the fender lip is the same front and rear.

07-03-2008, 04:04 PM	#785
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: How about some pictures of '73-'87 short beds I say leave it. That slight rake looks good... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

07-04-2008, 11:27 AM	#787
SCOTTROD Registered User Join Date: Sep 2007 Location: lubbock, tx Posts: 69	Re: How about some pictures of '73-'87 short beds Heres mine: Attached Images

07-04-2008, 12:51 PM	#788
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: How about some pictures of '73-'87 short beds Would love to see more pictures of your truck Scottrod. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

07-05-2008, 11:39 AM	#790
SCOTTROD Registered User Join Date: Sep 2007 Location: lubbock, tx Posts: 69	Re: How about some pictures of '73-'87 short beds heres some more: Attached Images

07-05-2008, 02:16 PM	#791
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: How about some pictures of '73-'87 short beds That is one nice truck. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

07-05-2008, 05:23 PM	#794
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: How about some pictures of '73-'87 short beds like the interiour on that one __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

07-06-2008, 05:28 PM	#797
gafiredog Registered User Join Date: May 2008 Location: metro Atlanta, Ga. Posts: 194	Re: How about some pictures of '73-'87 short beds beautiful truck scottrod !!!!

07-07-2008, 11:57 PM	#799
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,917	Re: How about some pictures of '73-'87 short beds I put the Coys that I bought for my 68 on for the weekend & took it up to Kellers the local burger/cruise joint. I figured a few pics w/the new shoes were good for sharing . . ..... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

07-08-2008, 09:51 AM	#800
upon1 Registered User Join Date: Oct 2007 Location: Saskatoon Posts: 138	Re: How about some pictures of '73-'87 short beds wow that is a deadly truck! what is your suspension setup and tire sizes??

Register or Log In To remove these advertisements.