Post pictures of your lifted 67-72's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Roadkillerv8 · 04-21-2016, 02:53 PM

Im trying to figure out what lift i wanna go with on my 72. Im thinking a 3 or 4 inch but still havent fully decided.

puller · 04-21-2016, 03:57 PM

3 inch body lift but do have 3 leaf HD front springs and 8 leaf rears.

collin70k/20 · 04-21-2016, 04:57 PM

Quote:

Originally Posted by puller

3 inch body lift but do have 3 leaf HD front springs and 8 leaf rears.

long stepper bed sweet truck man

collin70k/20 · 04-21-2016, 04:58 PM

Quote:

Originally Posted by collin70k/20

long stepper bed sweet truck man

what color blue is that?

puller · 04-22-2016, 12:09 PM

Quote:

Originally Posted by collin70k/20

what color blue is that?

Thanks! Toyota speedway blue pearl.

enigma · 04-22-2016, 02:12 PM

Im jealous beautiful truck Puller

**Ol Blue K20** · 04-22-2016, 02:37 PM

Quote:

Originally Posted by puller

3 inch body lift but do have 3 leaf HD front springs and 8 leaf rears.

Awesome looking truck Puller, I love the long step.

newstedcomeback · 04-22-2016, 02:44 PM

Here is my 71. It has a rough country 4" all spring lift. its on 37's with a dana 60 and 14 bolt.

newstedcomeback · 04-22-2016, 02:47 PM

better pic of the side.

enigma · 04-22-2016, 05:46 PM

cant wait to see what have in store and interesting name news

CG · 04-22-2016, 02:02 AM

I have a four inch lift with 35 inch tires on my new k20 and I really dislike it. I think I'm too old to haul my rear up in to the cab haha. It does look good though.

I have new 33 inch tires I'm putting on it when I can afford a 2.5 inch lift.

And puller that is a sweet long stepper.

**JIMs70GMC** · 04-22-2016, 06:19 PM

Here's mine. 3" springs up front. 4" springs in the rear with the factory block removed.

**special-K** · 04-27-2016, 05:39 AM

4" is where it all began. Then came bigger, then came smaller. I don't see much use for 3" lifts, except fine tuning a stance, and don't see why deciding between the two would be hard. It's only 1", can you really see that? Nothing against 3", just sating keep it simple and decide between 2" or 4". A 2" lift is a great way to add a healthy look to a stockish truck or allow better clearance for 33/12.50s. 4" will clear 35s with care and still not look too crazy lanky with 235/75s. That has the look of the early 4wds' stance. I had a 6" lift and 37" tires for my current '72, because I sold the short K/10 Stepside they were for. I also had a set of slots with 35s for an optional set. I sold the 6" stuff and 37s because I really didn't want it all that tall, and mostly wanted to get away from the huge expense of a set of tires. Since the trucks are more classic now, I gave consideration to keeping a closer to stock look (finally, after always running big rubber) and wanted a 2" lift with either 285/75s or 255/85s (35/12.50s for a wider option). But, here I still had the 35" set, so I decided to go with a 4" to run those and would that 2" more really matter with the other two sizes? They will look great, a healthy strong stance, with that lift.
Here is all I have for stock and with 4" lift, 9.75 wheels, and 35/12.50s
Name: Picture.jpg
Views: 3026
Size: 62.5 KB

Name: Picture.jpg
Views: 3026
Size: 62.5 KB

Name: IMG_0494.jpg
Views: 3021
Size: 43.2 KB

I guess what is wanted is 3" or 4" and nothing bigger?

**Razorbacker** · 04-28-2016, 09:53 PM

My K10 with a 2.5 spring lift on 33X10.50's

**Ol Blue K20** · 04-28-2016, 10:12 PM

Quote:

Originally Posted by Razorbacker

My K10 with a 2.5 spring lift on 33X10.50's

Extremely nice looking truck.

BLAZERMAN · 04-28-2016, 10:44 PM

72 K/10 with 4" Skyjacker lift, 35" BFG Mud Terrains on 8" wide Rally wheels.

**Razorbacker** · 04-29-2016, 01:21 PM

Quote:

Originally Posted by Ol Blue K20

Extremely nice looking truck.

Thank you.

**First c10** · 04-29-2016, 03:59 PM

70 K10 4" lift 33-12.50 Dick Cepeks on Alcoa wheels

**special-K** · 05-02-2016, 07:22 AM

"Swampthing Special" the day I sold it. Only picture I have. It's lifted some, with a few mods, but can't recall exactly what we did exactly. It's the original 2wd frame (reinforced) and we fabbed the mounts, crossmembers, and such to run the 2.5t Rockwell drivetrain

RANDY COX · 05-02-2016, 07:50 PM

Here's my ole 72 Blazer with 4" lift with 33's with the 8" stock wheels..

here's my old 70 Burban with 4" lift it had 33's when I sold it,this is it with 35's I believe..

**special-K** · 05-03-2016, 10:31 AM

I remember your Suburban. Don't you wish you could keep them all? I have pictures of my lifted '71 Blazer that are 32 or more years old. I wish I had it all that time. This thread is for general lifted 67-72s, so here it is/was. it has 7" of lift with 37/13-15 Swampers/8" wheels no rubbing

RANDY COX · 05-06-2016, 07:46 AM

Quote:

Originally Posted by special-K

I remember your Suburban. Don't you wish you could keep them all? I have pictures of my lifted '71 Blazer that are 32 or more years old. I wish I had it all that time. This thread is for general lifted 67-72s, so here it is/was

Yea wished I could keep them all.. I'd have a building full..

infinite-foamies · 05-04-2016, 02:51 PM

4" Rough Country. Rides better than my buddy's 2001 Stock Ranger Edge but worse than my 1988 F350 CCLB Dually Diesel(like sitting on your living room couch).

**special-K** · 05-04-2016, 10:59 PM

That is the biggest picture I have ever seen!

**Stocker** · 05-04-2016, 11:28 PM

Brief thread hijack -- what size tall & skinny tires are on that rig?

04-21-2016, 02:53 PM	#1
Roadkillerv8 Registered User Join Date: Aug 2015 Location: Washington Posts: 76	Post pictures of your lifted 67-72's Im trying to figure out what lift i wanna go with on my 72. Im thinking a 3 or 4 inch but still havent fully decided. __________________ 1972 GMC Sierra 'Ol Blue' K25 350/400 1999 GMC Sierra 'Ol Betsy' K15 5.3L Though I walk through the valley in the shadow of rice i will fear no turbo, for torque art with me. Thy rods and thy crankshaft, they comfort me.

04-21-2016, 03:57 PM	#2
puller Registered User Join Date: Aug 2011 Location: Manitowoc WI Posts: 67	Re: Post pictures of your lifted 67-72's 3 inch body lift but do have 3 leaf HD front springs and 8 leaf rears. Attached Images

04-22-2016, 02:12 PM	#6
enigma Registered User Join Date: Feb 2011 Location: enumclaw,Wa Posts: 120	Re: Post pictures of your lifted 67-72's Im jealous beautiful truck Puller

04-22-2016, 02:44 PM	#8
newstedcomeback Registered User Join Date: Apr 2008 Location: Santa Rosa, CA Posts: 99	Re: Post pictures of your lifted 67-72's Here is my 71. It has a rough country 4" all spring lift. its on 37's with a dana 60 and 14 bolt. Attached Images __________________ 1971 Chevy K30 / 454 / TH400 / NP205 / Dana 60/14 bolt FF on BFG Baja 37's - Build Thread : http://67-72chevytrucks.com/vboard/s...d.php?t=647877 2018 Silverado 1500 5.3 LTZ Z71 - daily driver 2019 Tahoe Z71 5.3 - (Wifes daily driver)

04-22-2016, 02:47 PM	#9
newstedcomeback Registered User Join Date: Apr 2008 Location: Santa Rosa, CA Posts: 99	Re: Post pictures of your lifted 67-72's better pic of the side. Attached Images __________________ 1971 Chevy K30 / 454 / TH400 / NP205 / Dana 60/14 bolt FF on BFG Baja 37's - Build Thread : http://67-72chevytrucks.com/vboard/s...d.php?t=647877 2018 Silverado 1500 5.3 LTZ Z71 - daily driver 2019 Tahoe Z71 5.3 - (Wifes daily driver)

04-22-2016, 05:46 PM	#10
enigma Registered User Join Date: Feb 2011 Location: enumclaw,Wa Posts: 120	Re: Post pictures of your lifted 67-72's cant wait to see what have in store and interesting name news

04-22-2016, 02:02 AM	#11
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: Post pictures of your lifted 67-72's I have a four inch lift with 35 inch tires on my new k20 and I really dislike it. I think I'm too old to haul my rear up in to the cab haha. It does look good though. I have new 33 inch tires I'm putting on it when I can afford a 2.5 inch lift. And puller that is a sweet long stepper. __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

04-22-2016, 06:19 PM	#12
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: Post pictures of your lifted 67-72's Here's mine. 3" springs up front. 4" springs in the rear with the factory block removed. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

04-27-2016, 05:39 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Post pictures of your lifted 67-72's 4" is where it all began. Then came bigger, then came smaller. I don't see much use for 3" lifts, except fine tuning a stance, and don't see why deciding between the two would be hard. It's only 1", can you really see that? Nothing against 3", just sating keep it simple and decide between 2" or 4". A 2" lift is a great way to add a healthy look to a stockish truck or allow better clearance for 33/12.50s. 4" will clear 35s with care and still not look too crazy lanky with 235/75s. That has the look of the early 4wds' stance. I had a 6" lift and 37" tires for my current '72, because I sold the short K/10 Stepside they were for. I also had a set of slots with 35s for an optional set. I sold the 6" stuff and 37s because I really didn't want it all that tall, and mostly wanted to get away from the huge expense of a set of tires. Since the trucks are more classic now, I gave consideration to keeping a closer to stock look (finally, after always running big rubber) and wanted a 2" lift with either 285/75s or 255/85s (35/12.50s for a wider option). But, here I still had the 35" set, so I decided to go with a 4" to run those and would that 2" more really matter with the other two sizes? They will look great, a healthy strong stance, with that lift. Here is all I have for stock and with 4" lift, 9.75 wheels, and 35/12.50s I guess what is wanted is 3" or 4" and nothing bigger? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 04-27-2016 at 05:45 AM.

04-28-2016, 09:53 PM	#14
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: Post pictures of your lifted 67-72's My K10 with a 2.5 spring lift on 33X10.50's Attached Images __________________ Tony 1972 Chevy K10 SWB Custom Deluxe 350\|350\|NP205 2018 GMC Sierra Z/71 Crew 2008 GMC Yukon 2007 Chevy 1500 LT 1967 Pontiac Firebird 400

04-28-2016, 10:44 PM	#16
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: Post pictures of your lifted 67-72's 72 K/10 with 4" Skyjacker lift, 35" BFG Mud Terrains on 8" wide Rally wheels. Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-29-2016, 03:59 PM	#18
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Post pictures of your lifted 67-72's 70 K10 4" lift 33-12.50 Dick Cepeks on Alcoa wheels Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

05-02-2016, 07:22 AM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Post pictures of your lifted 67-72's "Swampthing Special" the day I sold it. Only picture I have. It's lifted some, with a few mods, but can't recall exactly what we did exactly. It's the original 2wd frame (reinforced) and we fabbed the mounts, crossmembers, and such to run the 2.5t Rockwell drivetrain Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-02-2016 at 08:25 AM.

05-02-2016, 07:50 PM	#20
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Post pictures of your lifted 67-72's Here's my ole 72 Blazer with 4" lift with 33's with the 8" stock wheels.. here's my old 70 Burban with 4" lift it had 33's when I sold it,this is it with 35's I believe.. __________________ 1964 BBC 402 4x4

05-03-2016, 10:31 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Post pictures of your lifted 67-72's I remember your Suburban. Don't you wish you could keep them all? I have pictures of my lifted '71 Blazer that are 32 or more years old. I wish I had it all that time. This thread is for general lifted 67-72s, so here it is/was. it has 7" of lift with 37/13-15 Swampers/8" wheels no rubbing Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 09-24-2018 at 06:34 AM.



Register or Log In To remove these advertisements.

05-04-2016, 02:51 PM	#23
infinite-foamies Registered User Join Date: Apr 2014 Location: Northport, NY Posts: 161	Re: Post pictures of your lifted 67-72's 4" Rough Country. Rides better than my buddy's 2001 Stock Ranger Edge but worse than my 1988 F350 CCLB Dually Diesel(like sitting on your living room couch).

05-04-2016, 10:59 PM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Post pictures of your lifted 67-72's That is the biggest picture I have ever seen! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-04-2016, 11:28 PM	#25
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,495	Re: Post pictures of your lifted 67-72's Brief thread hijack -- what size tall & skinny tires are on that rig? __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

Register or Log In To remove these advertisements.