Shoulder belt swap from S10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kenny4454 · 12-01-2015, 11:46 AM

I was looking into getting shoulder belts for my 67 C10. I heard from someone that certain year S10 pickups will swap right in and are better then going the aftermarket route. Does anyone know which years Chevy S10 I should start searching for? Also, if anyone has done this can you please send pictures.

Andy4639 · 12-01-2015, 12:59 PM

I used late model truck seat & belts. I've used 2 sets out of late model trucks and both worked fine. I don't know how they will work with a factory seat because I swapped seats each time too!

89 truck 60/40 seat & belts:

99 Tahoe bucket's and belts:

kenny4454 · 12-02-2015, 02:42 PM

Thanks Andy for the pics! Has anyone on this forum done a S10 seatbelt swap? If so what year S10 did you use?

davepl · 12-02-2015, 03:08 PM

Bearing in mind that when not in use these are pretty much hidden, I don't think the aftermarket route looks all that bad.

Again, I don't leave them out like this, just so you can see them.

67ChevyRedneck · 12-02-2015, 03:15 PM

See my post posts in this thread starting with #5. There's pics and info where I got them.

http://67-72chevytrucks.com/vboard/s...ight=seat+belt

I've used the S10 belts before. The ones I used were from a 1st gen (square) S10. They're so old now I wouldn't really want to use them anyway. I've used 1st gen S10 and ones from a 73-87 GM truck, as well as aftermarket. I just put a new set of aftermarket in the truck (thread above). Pretty happy with them, and they're new.

kenny4454 · 12-03-2015, 03:40 PM

I like the look of those belts, thanks for sharing!

**Boog** · 12-03-2015, 10:37 PM

Dave what is the source of your belts? Nice interior too.

12-01-2015, 11:46 AM	#1
kenny4454 Registered User Join Date: Jun 2015 Location: bethesda, md Posts: 84	Shoulder belt swap from S10 I was looking into getting shoulder belts for my 67 C10. I heard from someone that certain year S10 pickups will swap right in and are better then going the aftermarket route. Does anyone know which years Chevy S10 I should start searching for? Also, if anyone has done this can you please send pictures.

12-01-2015, 12:59 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Shoulder belt swap from S10 I used late model truck seat & belts. I've used 2 sets out of late model trucks and both worked fine. I don't know how they will work with a factory seat because I swapped seats each time too! 89 truck 60/40 seat & belts: 99 Tahoe bucket's and belts: __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-02-2015, 02:42 PM	#3
kenny4454 Registered User Join Date: Jun 2015 Location: bethesda, md Posts: 84	Re: Shoulder belt swap from S10 Thanks Andy for the pics! Has anyone on this forum done a S10 seatbelt swap? If so what year S10 did you use?

12-02-2015, 03:08 PM	#4
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Shoulder belt swap from S10 Bearing in mind that when not in use these are pretty much hidden, I don't think the aftermarket route looks all that bad. Again, I don't leave them out like this, just so you can see them. Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

12-03-2015, 03:40 PM	#6
kenny4454 Registered User Join Date: Jun 2015 Location: bethesda, md Posts: 84	Re: Shoulder belt swap from S10 I like the look of those belts, thanks for sharing!

12-02-2015, 03:15 PM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Shoulder belt swap from S10 See my post posts in this thread starting with #5. There's pics and info where I got them. http://67-72chevytrucks.com/vboard/s...ight=seat+belt I've used the S10 belts before. The ones I used were from a 1st gen (square) S10. They're so old now I wouldn't really want to use them anyway. I've used 1st gen S10 and ones from a 73-87 GM truck, as well as aftermarket. I just put a new set of aftermarket in the truck (thread above). Pretty happy with them, and they're new. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

12-03-2015, 10:37 PM	#7
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,946	Re: Shoulder belt swap from S10 Dave what is the source of your belts? Nice interior too. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.