|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-17-2020, 04:31 PM
|
#1 |
|
Registered User
Join Date: Jul 2014
Location: Bowie, Maryland
Posts: 82
|
64 Chevy C10 Spindle Confirmation
Good Afternoon!
Forgive me. When I uploaded my spindle picture, the upload process turned the picture 180 degrees. So it is totally upside down. I could not figure out how to turn it back round once I uploaded to the site. Please tell me how to correct this for the future. I am hoping that when you read this, the picture can be rotated. Since my wheel bearing have gotten noisy, and since I have no idea how long the current rotors and calipers have been on, I wanted to change out the entire setup. I am hoping I can use the existing spindles. Can you tell from the picture if the spindle looks like an OEM drum spindle? I think it is. My desire is to use the existing spindles. I took that approach for my Chevy car and it worked out fine. If I go this route, I just want to make sure and not order a kit that will not be compatible with the spindles I have. I will be thankful for all responses. Edward |
|
|
|
08-17-2020, 09:42 PM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: 64 Chevy C10 Spindle Confirmation
No that is definitely not an original drum brake spindle. It looks to me like a '73-'87 spindle. It is quite easy and in expensive to just change the bearings and seals.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
08-17-2020, 11:15 PM
|
#3 |
|
Registered User
Join Date: Jul 2014
Location: Bowie, Maryland
Posts: 82
|
Re: 64 Chevy C10 Spindle Confirmation
I hear you Captain. Thank you.
Edward |
|
|
|
|
08-18-2020, 09:51 AM
|
#4 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,907
|
Re: 64 Chevy C10 Spindle Confirmation
Saved & flipped.….
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
