OK 58 1 ton truck chassis/drivetrain - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OnePunch · 10-22-2014, 07:52 PM

Quote:

Originally Posted by RockTonka

Waiting on shorty to answer...doesn't look like he's been on the board for a week or so.

If there's anything else somebody may want, let us know.

did you get my PM about the front wheels?

thanks.....

RockTonka · 10-23-2014, 12:56 AM

The stock front wheels were the dually type and are long gone. The front wheels on the truck now are just 15" shop roll arounds...one of the roll around rears is a split type single wheel and I'm not sure of the dia., I keep forgetting to check it. Are you looking for a single or dually type 17.5" wheel??

OnePunch · 10-23-2014, 09:21 AM

Quote:

Originally Posted by RockTonka

The stock front wheels were the dually type and are long gone. The front wheels on the truck now are just 15" shop roll arounds...one of the roll around rears is a split type single wheel and I'm not sure of the dia., I keep forgetting to check it. Are you looking for a single or dually type 17.5" wheel??

im looking for the single 8 x 17.5 eight lug wheel that would have came on a 57 1-ton panel

RockTonka · 10-27-2014, 05:39 PM

Guys, I'm not sure what proper etiquette is in this case, but shorty hasn't checked in to the site since he posted here...at least under his sign-on.

I've sent a PM (doesn't do any good if you don't sign in), of course with no response.

My feeling is we get to move on, if he checks back he can make a decision on what he may want then.

Let me know what y'all may want...

RockTonka · 01-24-2015, 10:40 PM

This is going to scrap next week...really hate to have to do that, but I can't sit on it any longer. $300 for what's left...come and get it!!

dwcsr · 01-24-2015, 11:49 PM

do you still have the front spindle/brake hub assembly?

RockTonka · 01-25-2015, 01:36 AM

yes, I do.

dwcsr · 01-27-2015, 05:56 AM

Quote:

Originally Posted by RockTonka

yes, I do.

I'd be interested in the spindles, drum and hub extensions. what do you want for them.

RockTonka · 01-27-2015, 03:21 PM

How about just taking the whole front axle?? Be a lot easier on me and it has new tie rod ends!! How about $100 for the front??

dwcsr · 01-27-2015, 04:39 PM

Can you get it on a pallet and weight it? If its not to expensive to ship I'd take the whole axle

RockTonka · 01-27-2015, 04:53 PM

Yea, I could get an estimate...need a zip though.
Length could be an issue...do we know anybody that may be driving between here and there at some point?
We make sporadic trips to Dallas now and then, I could hold the axle for a while for you if that made sense??

dwcsr · 01-27-2015, 05:14 PM

Unfortunately I don't know anyone driving that way. Picking up in Dallas is an option. The other idea is cut it in half. I don't need the axle it self I just need the hubs and spindles so it it fits on a much smaller pallet it would cost less. I do have a forklift so I don't need tailgate service. the zip is 77094 business address

RockTonka · 01-27-2015, 05:31 PM

Working on a freight quote now...may take till the morning to get an answer back. I would cut the axle at the back of the brakes, from there out could fit on a smaller pallet = less $$.

dwcsr · 01-27-2015, 05:38 PM

That will work and cut the tie rod just after the end threads

RockTonka · 01-27-2015, 05:41 PM

yep, that'll work.

RockTonka · 01-28-2015, 03:11 PM

I can get them shipped to you for $75.00. Therefore, $175 to your door for all that has been discussed!

dwcsr · 01-28-2015, 03:46 PM

Paypal ok?

RockTonka · 01-28-2015, 05:41 PM

Just send a check, I don't do paypal. PM sent! Thanks!

RockTonka · 02-08-2015, 11:09 PM

Drivetrain is gone, chassis is going to scrap. I pulled the carb and the PTO if somebody wants those...

dwcsr · 02-08-2015, 11:54 PM

Do you happen to have the hand brake lever ?

RockTonka · 02-09-2015, 12:50 AM

Sorry Dave, that went with the drivetrain today...

mrf1002u · 02-28-2015, 10:51 PM

Quote:

Originally Posted by RockTonka

Drivetrain is gone, chassis is going to scrap. I pulled the carb and the PTO if somebody wants those...

What PTO? You got a picture? You talkin about a PTO that would come off the side of the trans? If so, was the trans an SM420 granny low?

RockTonka · 03-01-2015, 04:24 AM

Yep, PTO off the side of the stock SM420. Let me see if I have a pic somewhere...

mrf1002u · 03-01-2015, 10:08 AM

Quote:

Originally Posted by RockTonka

Yep, PTO off the side of the stock SM420. Let me see if I have a pic somewhere...

Not something I really need as my one ton isn't a dump, but could be a novelty later down the road if it is cheap enough. How much to 32097 and is it all there? Out put flange and whatever?

Larry W.

mrf1002u · 03-01-2015, 10:14 AM

Quote:

Originally Posted by mrf1002u

Not something I really need as my one ton isn't a dump, but could be a novelty later down the road if it is cheap enough. How much to 32097 and is it all there? Out put flange and whatever?

Larry W.

P.S. Is there a lever or shifter of some kind to engage and disengage? Never had one before.

10-23-2014, 12:56 AM	#52
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain The stock front wheels were the dually type and are long gone. The front wheels on the truck now are just 15" shop roll arounds...one of the roll around rears is a split type single wheel and I'm not sure of the dia., I keep forgetting to check it. Are you looking for a single or dually type 17.5" wheel?? __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

10-27-2014, 05:39 PM	#54
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain Guys, I'm not sure what proper etiquette is in this case, but shorty hasn't checked in to the site since he posted here...at least under his sign-on. I've sent a PM (doesn't do any good if you don't sign in), of course with no response. My feeling is we get to move on, if he checks back he can make a decision on what he may want then. Let me know what y'all may want... __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-24-2015, 10:40 PM	#55
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain This is going to scrap next week...really hate to have to do that, but I can't sit on it any longer. $300 for what's left...come and get it!! __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-24-2015, 11:49 PM	#56
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 1 ton truck chassis/drivetrain do you still have the front spindle/brake hub assembly?

01-25-2015, 01:36 AM	#57
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain yes, I do. __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-27-2015, 03:21 PM	#59
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain How about just taking the whole front axle?? Be a lot easier on me and it has new tie rod ends!! How about $100 for the front?? __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-27-2015, 04:39 PM	#60
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 1 ton truck chassis/drivetrain Can you get it on a pallet and weight it? If its not to expensive to ship I'd take the whole axle

01-27-2015, 04:53 PM	#61
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain Yea, I could get an estimate...need a zip though. Length could be an issue...do we know anybody that may be driving between here and there at some point? We make sporadic trips to Dallas now and then, I could hold the axle for a while for you if that made sense?? __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-27-2015, 05:14 PM	#62
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 1 ton truck chassis/drivetrain Unfortunately I don't know anyone driving that way. Picking up in Dallas is an option. The other idea is cut it in half. I don't need the axle it self I just need the hubs and spindles so it it fits on a much smaller pallet it would cost less. I do have a forklift so I don't need tailgate service. the zip is 77094 business address

01-27-2015, 05:31 PM	#63
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain Working on a freight quote now...may take till the morning to get an answer back. I would cut the axle at the back of the brakes, from there out could fit on a smaller pallet = less $$. __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-27-2015, 05:38 PM	#64
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 1 ton truck chassis/drivetrain That will work and cut the tie rod just after the end threads

01-27-2015, 05:41 PM	#65
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain yep, that'll work. __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-28-2015, 03:11 PM	#66
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain I can get them shipped to you for $75.00. Therefore, $175 to your door for all that has been discussed! __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-28-2015, 03:46 PM	#67
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 1 ton truck chassis/drivetrain Paypal ok?

01-28-2015, 05:41 PM	#68
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain Just send a check, I don't do paypal. PM sent! Thanks! __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread



Register or Log In To remove these advertisements.

02-08-2015, 11:09 PM	#69
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain Drivetrain is gone, chassis is going to scrap. I pulled the carb and the PTO if somebody wants those... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

02-08-2015, 11:54 PM	#70
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 58 1 ton truck chassis/drivetrain Do you happen to have the hand brake lever ?

02-09-2015, 12:50 AM	#71
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain Sorry Dave, that went with the drivetrain today... __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

03-01-2015, 04:24 AM	#73
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 58 1 ton truck chassis/drivetrain Yep, PTO off the side of the stock SM420. Let me see if I have a pic somewhere... __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

Register or Log In To remove these advertisements.