The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-10-2018, 03:21 PM   #1
Senior Member
ScottH's Avatar
Join Date: Sep 2002
Location: Toms River, NJ
Posts: 7,623
Need info on stock v8 bellhousing cross member vs I6

I picked up a 65 swb truck a little while ago. Decent truck but the more I look the more I find whomever built it did not worry about doing things right. It has a 350 engine with a sagina 4 speed in it.

The engine is mounted in the forward V8 position with the correct towers. However what I noticed today is someone fabricated "extensions" (ie steel plates) from the bell housing to the original I6 cross member. The original x member is much further back than the bell housing so these span the distance.

My question, is there a different bell housing cross member for the V8 vs the I6? Or is the same x member used but located in a different position?

Any info is appreciated.

1967 C10 swb stepside (project)
1966 GMC G1000 Handi-bus (future project)
1965 C10 swb fleetside
1936 Ford 5 window coupe
ScottH is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 06:54 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 1997-2013