1968 - Page 89 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gdavis · 01-13-2015, 02:28 AM

Quote:

Originally Posted by swamp rat

Fingers crossed!

third time is a charm.
first one was all scratched up when I opened it up
second one was for a fleet bed
third I am crossing my fingers

only I could have this kind of luck.

gdavis · 01-14-2015, 01:06 AM

I got conformation on the rear bumper. It will be here VIA FedEx Tuesday Jan. 20th.
then I can start back on my truck. I need the bumper to adjust the rear Camaro gas tank. Then I can get started with the wood floor.

gdavis · 01-14-2015, 10:41 PM

order a few thing that I can not live without. Do anyone know where I can order a set of step side tail light lens gasket the rubber ones. I have check these company's
Tuckers
Classic Parts of America
LMC
summit
maneys

colgad · 01-14-2015, 10:48 PM

Not sure if these are rubber or not

http://sokyclassics.com/product.php?skcid=1001576

gdavis · 01-16-2015, 01:35 AM

Quote:

Originally Posted by colgad

Not sure if these are rubber or not

http://sokyclassics.com/product.php?skcid=1001576

No those are foam, I have a set of those. They tear so easy that is why I am wanting rubber. I am still waiting for the rear bumper.

gdavis · 01-16-2015, 03:17 PM

My front bumper came in this morning. It was suppose to come in on the 20th. 4 days early who is complaining. At last I got the right bumper. I will install the bumper today. maybe. The grand kids are taking over the front room as you can see. Got to love them.............................

gdavis · 01-17-2015, 01:30 AM

Well, today I installed the rear bumper. I put new bumper bolts on the bumper. One bolt gave me a problem. About half way it would not tighten or loosen up any. So I had to get my cutting tool out and cut the bolt off. I installed a new one and everything is a ok.
Tomorrow, I will adjust the gas tank so it centers in the square hole I cut in the bracket a month ago. If you look close enough you can see the tank sets a little too high and a little forward. I will correct that problem tomorrow. I am saving up for the front bumper next. Maybe next week, I will order it. Also I will be ordering a set of tail gate chain covers. These are to stiff as you can see.

swamp rat · 01-17-2015, 01:42 AM

Taking shape! That looks way better than the other bumper.

JD'S 69 · 01-17-2015, 03:05 AM

I ordered a rear bumper from LMC after I received it I discovered I ordered a fleetside and not a stepside. It cost to much to ship it back after all it was my mistake. I will sell it or find a truck it will fit. I ordered a show quality rear bumper from ecklers, I haven't got it yet.

**zicc1835** · 01-17-2015, 08:28 AM

looking good George remember these ...

http://67-72chevytrucks.com/vboard/s...d.php?t=642382

Mustard72 · 01-17-2015, 12:29 PM

Sweet!!!!

gdavis · 01-17-2015, 02:25 PM

Quote:

Originally Posted by JD'S 69

I ordered a rear bumper from LMC after I received it I discovered I ordered a fleetside and not a stepside. It cost to much to ship it back after all it was my mistake. I will sell it or find a truck it will fit. I ordered a show quality rear bumper from ecklers, I haven't got it yet.

yea I understand. When I ordered the bumper it stated it would fit my step side, well when It came it would fit but, it was to long. It was for a fleet. the company understood and took it back with any problem. They even paid for the shipping. I would do business with them again. The company is a jam up company. here is where they can be located. autopartswarehouse.com they are on e bay.
Classic parts sell it cheaper, but they do not ship for free and they do not take pay pal. Good luck with your build.

gdavis · 01-17-2015, 02:33 PM

Quote:

Originally Posted by swamp rat

Taking shape! That looks way better than the other bumper.

yea, this bumper is 6 inches shorter. I like the way it fits. The only problem that I had was when I mounted the tag support. It takes four 3/8 carriage bolts. But the fourth one was a little off. So I only installed three. It can's be seen and it's only holding a tag and bracket. I did not want to re drill the hole and take a chance in damaging the bumper. Maybe later I will take a rat tail file and do the support to receive the fourth bolt. Maybe.

gdavis · 01-17-2015, 02:36 PM

Quote:

Originally Posted by Mustard72

Sweet!!!!

Thanks. How far along are you with yours? I haven't heard from you in quite some time. I hope that you are getting along good. I don't envy you at all with all that snow.

gdavis · 01-18-2015, 12:52 AM

Today I adjusted the Camaro gas tank to the rear bumper. I mounted this old tag I found in a truck I parts out. This way I know how much room I have. I also hooked up the tag lights and the ground to the gas tank. Got everything taped up rear good. I hope to order my front bumper some time this next week.

gdavis · 01-19-2015, 02:27 AM

took it easy today. and rested.

swamp rat · 01-19-2015, 02:50 AM

Tank is lookin nice on the re-adjust George!

gdavis · 01-20-2015, 01:09 AM

Quote:

Originally Posted by swamp rat

Tank is lookin nice on the re-adjust George!

Thanks. I hope the front bumper don't give me as much trouble as the rear bumper.

gdavis · 01-22-2015, 12:58 AM

nothing came in today. Hoping soon.

JD'S 69 · 01-22-2015, 02:01 AM

Do you think you could take a picture of your bumper from the side. I'm not sure if mine is fitting correct. Thank you

72bowtiestepper · 01-22-2015, 08:55 AM

Rear bumper & camaro gas tank install looks good George ! Could you do me a favor & measure the stepside bumper....the exact length, end to end ? I don't want to buy the wrong one for my truck while searching at a swap meet or craigslist. Thanks in advance !

gdavis · 01-22-2015, 11:54 AM

Quote:

Originally Posted by JD'S 69

Do you think you could take a picture of your bumper from the side. I'm not sure if mine is fitting correct. Thank you

Pictures of the rear bumper side view. I hope this helps, George

gdavis · 01-22-2015, 11:58 AM

Quote:

Originally Posted by 72bowtiestepper

Rear bumper & camaro gas tank install looks good George ! Could you do me a favor & measure the stepside bumper....the exact length, end to end ? I don't want to buy the wrong one for my truck while searching at a swap meet or craigslist. Thanks in advance !

A fleet side bed bumper is 78 inches long
A step side rear bumper is 71 1/2 or 72 inches.

72bowtiestepper · 01-22-2015, 12:32 PM

Quote:

Originally Posted by gdavis

A fleet side bed bumper is 78 inches long
A step side rear bumper is 71 1/2 or 72 inches.

Thank You George....during research, I found that stepside bumpers from
1967 thru 1986 have the same part #. Now that I have your measurement,
I can begin my search...I HATE buying the wrong parts !

JD'S 69 · 01-22-2015, 07:15 PM

Thanks George your pictures really did help. Did your bumper have two extra holes on the bottom?

01-14-2015, 01:06 AM	#2202
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 I got conformation on the rear bumper. It will be here VIA FedEx Tuesday Jan. 20th. then I can start back on my truck. I need the bumper to adjust the rear Camaro gas tank. Then I can get started with the wood floor. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

01-14-2015, 10:41 PM	#2203
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 order a few thing that I can not live without. Do anyone know where I can order a set of step side tail light lens gasket the rubber ones. I have check these company's Tuckers Classic Parts of America LMC summit maneys __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

01-14-2015, 10:48 PM	#2204
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: 1968 Not sure if these are rubber or not http://sokyclassics.com/product.php?skcid=1001576 __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

01-16-2015, 03:17 PM	#2206
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 My front bumper came in this morning. It was suppose to come in on the 20th. 4 days early who is complaining. At last I got the right bumper. I will install the bumper today. maybe. The grand kids are taking over the front room as you can see. Got to love them............................. Attached Images __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper Last edited by gdavis; 01-17-2015 at 01:40 AM.

01-17-2015, 01:30 AM	#2207
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 Well, today I installed the rear bumper. I put new bumper bolts on the bumper. One bolt gave me a problem. About half way it would not tighten or loosen up any. So I had to get my cutting tool out and cut the bolt off. I installed a new one and everything is a ok. Tomorrow, I will adjust the gas tank so it centers in the square hole I cut in the bracket a month ago. If you look close enough you can see the tank sets a little too high and a little forward. I will correct that problem tomorrow. I am saving up for the front bumper next. Maybe next week, I will order it. Also I will be ordering a set of tail gate chain covers. These are to stiff as you can see. Attached Images __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper Last edited by gdavis; 01-17-2015 at 01:37 AM.

01-17-2015, 01:42 AM	#2208
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 1968 Taking shape! That looks way better than the other bumper. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-17-2015, 03:05 AM	#2209
JD'S 69 Registered User Join Date: Mar 2012 Location: Baker city Oregon Posts: 268	Re: 1968 I ordered a rear bumper from LMC after I received it I discovered I ordered a fleetside and not a stepside. It cost to much to ship it back after all it was my mistake. I will sell it or find a truck it will fit. I ordered a show quality rear bumper from ecklers, I haven't got it yet. __________________ When I stand before god at the at the end of my life, I would hope that I would not have a single bit of talent left, and I could say," I used everything you gave me" My 69 stepper http://67-72chevytrucks.com/vboard/s...d.php?t=601095

01-17-2015, 08:28 AM	#2210
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,119	Re: 1968 looking good George remember these ... http://67-72chevytrucks.com/vboard/s...d.php?t=642382 __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

01-17-2015, 12:29 PM	#2211
Mustard72 Registered User Join Date: Jul 2012 Location: Ladysmith, WI Posts: 641	Re: 1968 Sweet!!!! __________________ Nick Old Mustard, 1972 Chevy C20, 350, TH350, 4.10 Dana 60 rear, owned since I was 16 in 1986 http://67-72chevytrucks.com/vboard/s...d.php?t=545356 Blue Bell, 1987 K20, 6.2L Diesel, TH400/NP208, 4.10 gears Ustahav 1976 K10, 350/350/203, Gov Loc, Yooper beater trail truck.

01-18-2015, 12:52 AM	#2215
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 Today I adjusted the Camaro gas tank to the rear bumper. I mounted this old tag I found in a truck I parts out. This way I know how much room I have. I also hooked up the tag lights and the ground to the gas tank. Got everything taped up rear good. I hope to order my front bumper some time this next week. Attached Images __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

01-19-2015, 02:27 AM	#2216
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 took it easy today. and rested. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

01-19-2015, 02:50 AM	#2217
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 1968 Tank is lookin nice on the re-adjust George! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-22-2015, 12:58 AM	#2219
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 nothing came in today. Hoping soon. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

01-22-2015, 02:01 AM	#2220
JD'S 69 Registered User Join Date: Mar 2012 Location: Baker city Oregon Posts: 268	Re: 1968 Do you think you could take a picture of your bumper from the side. I'm not sure if mine is fitting correct. Thank you __________________ When I stand before god at the at the end of my life, I would hope that I would not have a single bit of talent left, and I could say," I used everything you gave me" My 69 stepper http://67-72chevytrucks.com/vboard/s...d.php?t=601095

01-22-2015, 08:55 AM	#2221
72bowtiestepper Registered User Join Date: Feb 2013 Location: Northwest NJ Posts: 684	Re: 1968 Rear bumper & camaro gas tank install looks good George ! Could you do me a favor & measure the stepside bumper....the exact length, end to end ? I don't want to buy the wrong one for my truck while searching at a swap meet or craigslist. Thanks in advance !



Register or Log In To remove these advertisements.

01-22-2015, 07:15 PM	#2225
JD'S 69 Registered User Join Date: Mar 2012 Location: Baker city Oregon Posts: 268	Re: 1968 Thanks George your pictures really did help. Did your bumper have two extra holes on the bottom? __________________ When I stand before god at the at the end of my life, I would hope that I would not have a single bit of talent left, and I could say," I used everything you gave me" My 69 stepper http://67-72chevytrucks.com/vboard/s...d.php?t=601095

Register or Log In To remove these advertisements.