The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-22-2018, 11:52 AM   #1
Thebrownturd
Registered User
 
Join Date: Jun 2013
Location: Palamino Valley, Nevada
Posts: 220
4x4 Transmission rebuild

Can anyone point me in the right direction for a th350 rebuild kit? There are so many options I would like to know if anyone has had good luck with any kits and if there is any I should stay away from.

The truck is a 3/4 ton 4x4, with a stock 350 motor and will see towing duty and off roading.

I am also not sure what stall speed for my torque converter to get. This is my first time working on a transmission.

So far I've read about upgrading the rear sprag/roller clutch from a 4l60 to spread out the stress a little better.

Not sure if staying stock or getting some kind of shift kit would benefit me in any way?

I know its a lot of questions but any input is appreciated so I can move on to buy the parts I need and get the tranny back in before the snow flies. Thanks
Thebrownturd is offline   Reply With Quote
Old 09-22-2018, 12:09 PM   #2
mongocanfly
Senior Member
 
Join Date: May 2015
Location: Alabama
Posts: 7,069
Re: 4x4 Transmission rebuild

It's been along time since I've rebuilt a auto trans..but I always used b&m kits with good luck...as far a stall ,unless your building a big cam engine a stock converter should be fine...
__________________
Mongo...aka Greg

1981 c30 lq9 nv4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
1955.1 ls3 tr6060...(under construction)(on hold)
2013 gmc z71. (daily driver)
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
mongocanfly is offline   Reply With Quote
Old 09-22-2018, 02:35 PM   #3
Thebrownturd
Registered User
 
Join Date: Jun 2013
Location: Palamino Valley, Nevada
Posts: 220
Re: 4x4 Transmission rebuild

What would the factory stall speed for a 350/350/np205 and 4:10 gears be then? I can't seem to find that info anywhere
Thebrownturd is offline   Reply With Quote
Old 09-22-2018, 07:59 PM   #4
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 1,283
Re: 4x4 Transmission rebuild

do a transtar reman kit .

and a transgo sk350 kit .

then have your convertor remand or swapped out .

dont forget a can of cooler flush to rinse the lines and cooler out .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
sweetk30 is offline   Reply With Quote
Old 09-24-2018, 06:42 PM   #5
YoungPup1977
Registered User
 
YoungPup1977's Avatar
 
Join Date: Jun 2015
Location: X
Posts: 557
Re: 4x4 Transmission rebuild

On a stock 350 engine which may see some towing time, I would make sure you have extra cooling other than the cooler in the radiator. There are several nice trans coolers on the market, take your pick.

Grab a Master rebuild kit with steels produced by transtar, transgo SK350 shift kit, upgrade your intermediate sprag, bushing kit, thrust washer kit, adjustable modulator, band, filter and a stock TC.

Bushing kit (buy the one that has the wider direct clutch drum bushing), weak point on a factory T350.

Governor springs from SK, use YELLOW/YELLOW.

Direct drum pressure plate is thicker than the Forward clutch pressure plate.... they are used for clearance purposes. Always check your clutch clearances.

If you like nice firm shifts "ONLY", you can do a few of the following suggestions which does not cost much:
1. Take the waved plate out of the "intermediate clutch pack" and replace it with a steel these steels fit into the case of the trans, which is used for second gear, clutches spline into the intermediate sprag assembly.
2. remove and discard the accumulator spring.
3. remove the spring under the piston in the VB that applies the band.

Thats enough free advice for now.....GOOD LUCK !

Last edited by YoungPup1977; 09-24-2018 at 11:40 PM.
YoungPup1977 is offline   Reply With Quote
Old 09-27-2018, 02:01 PM   #6
Chevyrestorerman
Registered User
 
Join Date: Aug 2018
Location: South Dakota
Posts: 134
Quote:
Originally Posted by Thebrownturd View Post
Can anyone point me in the right direction for a th350 rebuild kit? There are so many options I would like to know if anyone has had good luck with any kits and if there is any I should stay away from.

The truck is a 3/4 ton 4x4, with a stock 350 motor and will see towing duty and off roading.

I am also not sure what stall speed for my torque converter to get. This is my first time working on a transmission.

So far I've read about upgrading the rear sprag/roller clutch from a 4l60 to spread out the stress a little better.

Not sure if staying stock or getting some kind of shift kit would benefit me in any way?

I know its a lot of questions but any input is appreciated so I can move on to buy the parts I need and get the tranny back in before the snow flies. Thanks
Are you planning on rebuilding this th350 yourself ?
Is there anything wrong with it today that is stopping you from using your truck. Do you have a plow on the front of it
Chevyrestorerman is offline   Reply With Quote
Old 09-27-2018, 02:22 PM   #7
Thebrownturd
Registered User
 
Join Date: Jun 2013
Location: Palamino Valley, Nevada
Posts: 220
Re: 4x4 Transmission rebuild

Quote:
Originally Posted by Chevyrestorerman View Post
Are you planning on rebuilding this th350 yourself ?
Is there anything wrong with it today that is stopping you from using your truck. Do you have a plow on the front of it
Yes I plan to do it myself since the quote I've have in town to rebuild my trans is 1400. Seems steep for a 350. I took it out to replace main seals since it was leaking all over. You can see the oil stains all the way on the real axle. It always seemed to struggle when shifting into R or D and would sort of stall before actually engaging then it randomly engages and jolts pretty hard. Not sure if the cause but definatly was a trans issue since I repacked the u joints which were also the cause of some of the jolting.
Thebrownturd is offline   Reply With Quote
Old 09-27-2018, 09:23 PM   #8
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 1,283
Re: 4x4 Transmission rebuild

a th350 reman job and you have it out already for 1400 bucks = bend you over and dont use the lube please .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
sweetk30 is offline   Reply With Quote
Old 09-28-2018, 12:59 AM   #9
Thebrownturd
Registered User
 
Join Date: Jun 2013
Location: Palamino Valley, Nevada
Posts: 220
Re: 4x4 Transmission rebuild

Do any of you have the part number for the full rebuild kit from transtar? Will this include all basic stuff or most of it? By that i mean washers, steels, bearings, bushings etc.
Thebrownturd is offline   Reply With Quote
Old 09-28-2018, 09:05 AM   #10
Bigdav160
Registered User
 
Bigdav160's Avatar
 
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,180
Re: 4x4 Transmission rebuild

Transmission kits are usually sold by the piece.

Paper and rubber,
Add clutch choice (here they call them 'banner' kits)
add steel plates (masters)
Bushings extra
Band extra
Filter extra
bearings/thrust washers extra
any hard parts or shift improver kits extra
Converter? extra
__________________
My Classics:
'72 K20 Suburban + '65 Dodge Town Wagon
'72 Corvette Roadster +'67 Corvette Roadster
'73 Z-28 Camaro
'63 Ford SWB Uni Pickup
'50 Ford Coupe
Bigdav160 is offline   Reply With Quote
Old 09-28-2018, 01:32 PM   #11
Chevyrestorerman
Registered User
 
Join Date: Aug 2018
Location: South Dakota
Posts: 134
Re: 4x4 Transmission rebuild

Sounds like you may have a front pump issue as well, the th350's are bad for having bad pump/stator issues....which does not come in a master kit.

google the master kit for a th350....amazing what the internet can do for you as far as the part numbers, it may take some of your time to figure what you want to spend and order using part numbers that you can find on the internet. Do your homework yourself this way you can only blame self for ordering the wrong part.

One more thing, its best to get the transmission apart and figure what is wrong, than order your parts. Most likely, you will need some hard parts too. hard parts meaning front pump/stator, input shaft where it goes into the output shaft wears the bushing which in turn wears out the input shaft, direct drum is a weak part (bushing wear) because how the stator is designed in the t350. Make sure you check the governor bore in the case once you remove the governor out of the case.

Last edited by Chevyrestorerman; 09-30-2018 at 08:17 PM.
Chevyrestorerman is offline   Reply With Quote
Old 10-01-2018, 05:01 PM   #12
Myself
Registered User
 
Join Date: Oct 2005
Location: Northern Arkansas
Posts: 773
Re: 4x4 Transmission rebuild

I always buy my parts here...http://www.makcotransmissionparts.com/350-350c.html

I usually do 1 or 2 performance overhauls a year. It's VERY hard to beat these folks prices on quality parts.

And also for a 4x4 that will see towing and off roading stick with a low/stock stall speed.
Myself is offline   Reply With Quote
Old 10-01-2018, 05:45 PM   #13
Chevyrestorerman
Registered User
 
Join Date: Aug 2018
Location: South Dakota
Posts: 134
Re: 4x4 Transmission rebuild

Quote:
Originally Posted by Myself View Post
I always buy my parts here...http://www.makcotransmissionparts.com/350-350c.html

I usually do 1 or 2 performance overhauls a year. It's VERY hard to beat these folks prices on quality parts.

And also for a 4x4 that will see towing and off roading stick with a low/stock stall speed.
Makco sells TRANSTAR parts, kits, etc.... Hard parts used to come out of TN by a company called Dacco. The owner used to work there, Mr George.
__________________
46 total vehicles in my collection:
4 -72 blazer 4x4, 1 - 72 GMC 2wd, 3 - 72 c10 swb
3 - 67 corvettes, 1 - 67 chevelle, 5 - 68 chevelles
2 - 67 Nova SS, 1 - 57 nomad, 1 - 57 belair
Chevyrestorerman is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com