The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-12-2018, 12:12 AM   #1
Richard8971
Still livin the "dream" in '54
 
Richard8971's Avatar
 
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,653
GMC 270 engine mystery.

I have a '48 GMC 300 series truck. The
motor has been replaced with a 270.

GMC engine serial numbers are hard to come by/interpret. Here is the only block number I can find.

Can anyone help ID so I can maybe figure out what parts I need to order. Thanks.

From what I have read, they made a couple of different types of 270's over the years.
Attached Images
 
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD!

My '67 stepper "Tangerine Dream"

"Anything worth doing is worth doing right" James Dean

“When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.”
Sherlock Holmes

"There is no spoon." Neo
Richard8971 is offline   Reply With Quote
Old 10-12-2018, 07:58 AM   #2
1project2many
Registered User
 
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 2,136
Re: GMC 270 engine mystery.

I've never searched for an old GMC engine number before. It looks like the first three digits designate the engine as a 270. I believe the second three digits are a serial number. I believe I 4 I would be where a date code is found, and that the format should follow the same format as the casting date codes. If so, that the second I should be a number.

Quote:
Lastly, here is another helpful bit of information on reading date codes from Andy Siechen, our GMC Engine Technical Advisor: Several people have asked here and through my email about how to tell what year an engine really is. Here goes: I attached a picture of what is used to determine the casting date of the GMC engine blocks and heads.

The first digit is always a letter of the alphabet A-L. A=January, B=Febuary, C=March etc, etc all the way to L=December. The next digit is a number 1-31 which is the day of the month. The last digit is always a single number and represents the year of the casting.
So unless the I is a 1, which would indicate a '51, we have a genuine mystery.

My suggestion is to look for the casting dates on the block and head using the following reference:

Quote:
The date code casting for the block is usually on the same side if the block as the casting number. The cylinder head location is usually outside the valve cover near the center. Some of the later 270 and 302 heads had all the casting numbers and date castings under the valve cover down near where the pushrods come through. The raised area with the date almost looks like a small plate attached with two screws and they are often mistaken for something that can be removed. They actually are part of the casting.
Good luck in the search.
1project2many is offline   Reply With Quote
Old 10-12-2018, 04:59 PM   #3
rustycars63
Registered User
 
Join Date: Aug 2015
Location: Sulphur oklahoma
Posts: 27
Re: GMC 270 engine mystery.

There is a GMC old trucks web site that can help you with identify of your block.
rustycars63 is offline   Reply With Quote
Old 10-12-2018, 05:50 PM   #4
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 10,171
Re: GMC 270 engine mystery.

The Old GMC site doesn't show engine numbers that I can find. http://www.oldgmctrucks.com/index.html

I did find this with casting numbers http://home.znet.com/c1937/Cast.htm
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com