11-29-2010, 11:36 PM | #1 |
Registered User
Join Date: Dec 2008
Location: Ashland, KY
Posts: 700
|
Head gaskets?
Im swapping to Vortecs on my 400 sbc but i dnt know what head gaskets to use what would yall recommended? I dnt know if its been bored out, so will that matter? It should have around 9.5-10 compression street motor?
__________________
68 C10 LWB 2/4 drop 406/th400/3.73posi 04 Silverado SS LQ9 6.0/4L65e/4.11posi AWD |
11-30-2010, 01:32 AM | #2 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Head gaskets?
You'll need head gaskets for a SBC 400, and you'll have to drill the steam holes in the heads. It would be ideal to know your piston to deck measurement for optimum quench. But if you don't know if it is bored or not, you likely don't have that info.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
Bookmarks |
|
|