47-55.1 47 - 53 Rear Bumper - where to buy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

b-mac · 03-02-2020, 03:48 PM

I plan on painting my bumpers. Feels silly to buy chrome. Does anyone know where to find one? I would buy used.

I have one, but it's all bent to hell. P,P,P,PO probably pulled somebody out of a ditch with a chain.

Zippi · 03-02-2020, 04:55 PM

Try here. Cheaper than Chrome.

https://www.ebay.com/itm/Goodmark-19...ke%3AChevrolet

**mongocanfly** · 03-02-2020, 05:05 PM

Good price...but that free shipping is worth a lot more

mr48chev · 03-02-2020, 05:05 PM

Why not straighten the one you have? Or if there is a chrome shop that does bumpers you might see about having them straighten it but not do the finish work. = get it to the point where you can do the finish work and priming and painting. They may look at you like you grew horns but it should be a simple process for them and you get it back straight but needing finishing.

b-mac · 03-03-2020, 11:21 AM

Ok Mr. 48. I'm down for this idea.

Although, I don't have an acetylene torch. Do you think I could get away with heating it with map gas?

I'll try to find a pic of the damage.

mr48chev · 03-05-2020, 10:11 PM

A good stump or big round of firewood and a big hammer and a buddy fool enough to hang onto it while you beat on it might work pretty well to get it roughed back in shape.

Or if you know someone who has a hydraulic press you can use for a bit.

I'm not sure that the map gas would heat it enough to do any good nor am I sure you even need to heat it.

**joedoh** · 03-05-2020, 10:42 PM

bumpers are relatively springy, I dont think a big hammer will do a lot. best thing to do is run it over, no kidding.

i repaired one on nicks 54 that was torn in half, ended up with the gnarliest looking scar.

rear bumpers are hard to come by, (that is a front bumper on the back of nicks, lots of guys do that) I only have one and its in deplorable condition or I would offer another if I had it. there is a guy in rose hill who stashes these parts, or the swap meet is next weekend anyway.

mick53 · 03-06-2020, 11:02 PM

I have one in Indiana you can have. I bought new stainless ones. I can take pictures of it if you want.

sprworm12 · 03-20-2020, 09:03 AM

I have a new unpainted, you pay the shipping and it's yours.

mick53 · 03-21-2020, 06:19 PM

Here is my front bumper. It's yours if you want it.

Jemezcrusher · 03-22-2020, 08:44 PM

Brothers truck has a sale on. 150 for a chrome one so imagine the painted one would be cheaper

b-mac · 03-23-2020, 03:53 PM

sprworm12, I'm in. I PM'd you. But let me know if you don't get it.

mick53, I very much appreciate it brother, but yours is actually I little rougher than my current. And I have brackets built for the rear bumper.

Thanks for the note on Brothers. I'll buy new if I have to.

jocww · 03-25-2020, 01:15 AM

the rear is the same as the front.

**mongocanfly** · 03-25-2020, 06:52 AM

front and rear arnt the same...the rear doesn't have as much arch to it and is flat across the middle
borrowed pics showing difference
and the 54-55 rears have the license plate cutout

**joedoh** · 03-25-2020, 02:07 PM

Quote:

Originally Posted by jocww

the rear is the same as the front.

no, see my post above for what a front bumper looks like on the rear.

03-02-2020, 03:48 PM	#1
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 516	47 - 53 Rear Bumper - where to buy I plan on painting my bumpers. Feels silly to buy chrome. Does anyone know where to find one? I would buy used. I have one, but it's all bent to hell. P,P,P,PO probably pulled somebody out of a ditch with a chain.

03-02-2020, 04:55 PM	#2
Zippi Registered User Join Date: Nov 2019 Location: Southern Indiana Posts: 585	Re: 47 - 53 Rear Bumper - where to buy Try here. Cheaper than Chrome. https://www.ebay.com/itm/Goodmark-19...ke%3AChevrolet __________________ If you can't fix it with duct tape, it's an electrical problem. 1949 5 Window 3100 https://zippi6.wixsite.com/adtruck

03-02-2020, 05:05 PM	#3
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: 47 - 53 Rear Bumper - where to buy Good price...but that free shipping is worth a lot more __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

03-02-2020, 05:05 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,265	Re: 47 - 53 Rear Bumper - where to buy Why not straighten the one you have? Or if there is a chrome shop that does bumpers you might see about having them straighten it but not do the finish work. = get it to the point where you can do the finish work and priming and painting. They may look at you like you grew horns but it should be a simple process for them and you get it back straight but needing finishing. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-03-2020, 11:21 AM	#5
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 516	Re: 47 - 53 Rear Bumper - where to buy Ok Mr. 48. I'm down for this idea. Although, I don't have an acetylene torch. Do you think I could get away with heating it with map gas? I'll try to find a pic of the damage.

03-05-2020, 10:11 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,265	Re: 47 - 53 Rear Bumper - where to buy A good stump or big round of firewood and a big hammer and a buddy fool enough to hang onto it while you beat on it might work pretty well to get it roughed back in shape. Or if you know someone who has a hydraulic press you can use for a bit. I'm not sure that the map gas would heat it enough to do any good nor am I sure you even need to heat it. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-05-2020, 10:42 PM	#7
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,746	Re: 47 - 53 Rear Bumper - where to buy bumpers are relatively springy, I dont think a big hammer will do a lot. best thing to do is run it over, no kidding. i repaired one on nicks 54 that was torn in half, ended up with the gnarliest looking scar. rear bumpers are hard to come by, (that is a front bumper on the back of nicks, lots of guys do that) I only have one and its in deplorable condition or I would offer another if I had it. there is a guy in rose hill who stashes these parts, or the swap meet is next weekend anyway. Attached Images __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

03-06-2020, 11:02 PM	#8
mick53 Registered User Join Date: Oct 2018 Location: Warsaw IN Posts: 882	Re: 47 - 53 Rear Bumper - where to buy I have one in Indiana you can have. I bought new stainless ones. I can take pictures of it if you want.

03-20-2020, 09:03 AM	#9
sprworm12 Registered User Join Date: Oct 2010 Location: gadsden ,al Posts: 36	Re: 47 - 53 Rear Bumper - where to buy I have a new unpainted, you pay the shipping and it's yours.

03-21-2020, 06:19 PM	#10
mick53 Registered User Join Date: Oct 2018 Location: Warsaw IN Posts: 882	Re: 47 - 53 Rear Bumper - where to buy Here is my front bumper. It's yours if you want it. Attached Images

03-22-2020, 08:44 PM	#11
Jemezcrusher Registered User Join Date: Nov 2015 Location: Jemez Springs, NM Posts: 433	Re: 47 - 53 Rear Bumper - where to buy Brothers truck has a sale on. 150 for a chrome one so imagine the painted one would be cheaper

03-23-2020, 03:53 PM	#12
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 516	Re: 47 - 53 Rear Bumper - where to buy sprworm12, I'm in. I PM'd you. But let me know if you don't get it. mick53, I very much appreciate it brother, but yours is actually I little rougher than my current. And I have brackets built for the rear bumper. Thanks for the note on Brothers. I'll buy new if I have to.

03-25-2020, 01:15 AM	#13
jocww Registered User Join Date: Aug 2017 Location: San Ramon, Ca Posts: 251	Re: 47 - 53 Rear Bumper - where to buy the rear is the same as the front. __________________ My build a 49 5 window ls1 4l60e on a TCI chassis http://67-72chevytrucks.com/vboard/s...d.php?t=754926 My travel blog The Wong Winding Road-Adventures of The Chinese Cowboy https://thewongwindingroad.blogspot.com/

03-25-2020, 06:52 AM	#14
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: 47 - 53 Rear Bumper - where to buy front and rear arnt the same...the rear doesn't have as much arch to it and is flat across the middle borrowed pics showing difference and the 54-55 rears have the license plate cutout Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 03-25-2020 at 12:34 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.