New Project truck!! - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 11-02-2005, 07:08 PM

Fronts are 5.25" and rears are 5.5"

smbrouss70 · 11-20-2005, 01:40 AM

Man, I just stumbled onto this thread, and Now I want a sportside truck like that. And I thought I had finally cured myself from bringing stuff home when I finally found a 70 2wd Blazer (been looking for one for about 15 years)

Your truck is killer! but I'm sure its going to be a lot more fun with that BBC in there.

phantom dually · 11-20-2005, 11:04 AM

Thanks for the comments. I actually am heading out to the garage today to start pulling the drivetrain out. Should be fun!!

phantom dually · 11-23-2005, 12:19 AM

Got a start on the engine. Anyone know how to get to the top bolt on the serpentine bracket? I think I have to remove the pump to get there. The pulley has to come off to do this??

NLang · 11-23-2005, 01:50 AM

Ah yes, PITA...If I recall correctly, you first have to remove the ps pump pulley in order to remove the bracket from the head. I've done it a few times on my '94.

phantom dually · 11-23-2005, 07:20 PM

Quote:

Originally Posted by NLang

Ah yes, PITA...If I recall correctly, you first have to remove the ps pump pulley in order to remove the bracket from the head. I've done it a few times on my '94.

Yeah I was afraid of that!! Welcome to the board!!!

3100 special · 11-25-2005, 01:27 PM

Just reviewing all of the posts on this thread. Very nice work!
Well done.

phantom dually · 11-25-2005, 03:54 PM

Its gettin there Thanks!!

phantom dually · 11-27-2005, 12:04 AM

Update!! Got the old engine out and the 2 seperated. Tore into the engine compartment and am trying sort out the wiring. CUT out alot of wires that I wont need.

I plan to fill some of the extra holes in the firewall that I wont need such as winsheild wiper motor, Cruise, AC, heat etc etc. I may keep the heater core so I can atleast have a defrost. I must have cut 10 pounds of wiring out. Im going to rebuild the 350 and put it into my C2500 Daily driver.

**N2TRUX** · 11-27-2005, 12:37 AM

Quote:

Originally Posted by phantom dually

.... I plan to fill some of the extra holes in the firewall that I wont need such as winsheild wiper motor,.....

Nice progress. So your not going to have wipers?

phantom dually · 11-27-2005, 12:42 AM

Quote:

Originally Posted by N2TRUX

Nice progress. So your not going to have wipers?

You dont need wipers when you dont drive it in the rain!!

Tracy Focht · 11-30-2005, 10:21 PM

keep the dang 350 and send me that 496

phantom dually · 11-30-2005, 11:37 PM

Quote:

Originally Posted by Tracy Focht

keep the dang 350 and send me that 496

Hey man long time no talky!! Hows life?? I think I will hold on to the 496. the 350 is going into my other truck. I will however have a nice low mile 305 if you need one.

Tracy Focht · 12-01-2005, 11:10 AM

a 305, let me think about it...what heads...no, just kidding. LOL...I think I'll stick with walking

truck is looking great man...

chuck1960 · 12-01-2005, 11:13 PM

Truck looks perfect, that's some great work. keep up the details & pics.

phantom dually · 12-01-2005, 11:17 PM

Quote:

Originally Posted by chuck1960

Truck looks perfect, that's some great work. keep up the details & pics.

Im tryin like hell. Christmas is diggin into my play money!!

phantom dually · 12-11-2005, 09:51 PM

Found a dash and steering column from a 97 truck. Also got a set of power leather seats from a 95 truck. They will need recovered so I plan on doing some Katzkins on them. I still need some door panels and a few odds and ends.

smbrouss70 · 12-11-2005, 10:35 PM

Every time I look at this thread, the only word that comes to mind is SEXY! I feel like a junkie waiting on my fix (meaning more progress). Don't feel bad though my progress is ALOT slower than yours.

phantom dually · 12-11-2005, 10:54 PM

Yeah I try not to think of the $$ I have put into this already!!

67chevemall · 12-21-2005, 10:52 AM

You are you sick insane man! I love it! WOW
good work! Do you ever slow down?
The wheels were a great choice!
And that garage, man ....

phantom dually · 12-21-2005, 09:10 PM

Quote:

Originally Posted by 67chevemall

You are you sick insane man! I love it! WOW
good work! Do you ever slow down?
The wheels were a great choice!
And that garage, man ....

Thanks for the comments. I have alot left to do!!

1987 Shortwide · 12-22-2005, 03:27 AM

Awsome buildup so far man. I'm very anxious to see the finish product! You make me feel like I'm working slow

phantom dually · 12-22-2005, 09:06 PM

Quote:

Originally Posted by 1987 Shortwide

Awsome buildup so far man. I'm very anxious to see the finish product! You make me feel like I'm working slow

Man your coming along great. I had a 83 truck that I took down to the frame. Things didnt go as smooth as I had hoped with a few suspension parts. 2 Yrs in I decided I had enough. I sold off every part little by little. I bought the 92 and got to work. I learned alot on the first attempt. I decided I would set a reasonable plan and bust ass to get my goals done for the summer. I made those goals, now all I need is some $$ and a new set of goals!!

phantom dually · 01-02-2006, 12:44 AM

Worked on the truck a little tonight. Got the dash out so I could get all the A/C and heat parts out. I am going to clean up the firewall so these must go. I also got my master cylinder mocked into place for the TKO tranny.

phantom dually · 01-02-2006, 12:48 AM

I worked on the engine some also getting the heads bolted up and the timing chain cover. Also set the oil pump as well.

11-02-2005, 07:08 PM	#151
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! Fronts are 5.25" and rears are 5.5" __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-20-2005, 01:40 AM	#152
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: New Project truck!! Man, I just stumbled onto this thread, and Now I want a sportside truck like that. And I thought I had finally cured myself from bringing stuff home when I finally found a 70 2wd Blazer (been looking for one for about 15 years) Your truck is killer! but I'm sure its going to be a lot more fun with that BBC in there. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

11-20-2005, 11:04 AM	#153
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! Thanks for the comments. I actually am heading out to the garage today to start pulling the drivetrain out. Should be fun!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-23-2005, 12:19 AM	#154
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! Got a start on the engine. Anyone know how to get to the top bolt on the serpentine bracket? I think I have to remove the pump to get there. The pulley has to come off to do this?? Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-23-2005, 01:50 AM	#155
NLang Registered User Join Date: Aug 2005 Location: Destin, FL Posts: 1	Re: New Project truck!! Ah yes, PITA...If I recall correctly, you first have to remove the ps pump pulley in order to remove the bracket from the head. I've done it a few times on my '94.

11-25-2005, 01:27 PM	#157
3100 special Street Rod Dreamin' Join Date: Feb 2004 Location: Work:Batam, Indonesia/ Home:League City, Texas Posts: 1,243	Re: New Project truck!! Just reviewing all of the posts on this thread. Very nice work! Well done. __________________ 1954 Chevy 3100 Panel Truck 2004 GMC Yukon 2007 GMC Sierra 4X4 "I am for doing good to the poor, but I differ in opinion of the means. I think the best way of doing good to the poor, is not making them easy in poverty, but leading or driving them out of it." Benjamin Franklin, On the Price of Corn and Management of the Poor, November 1776

11-25-2005, 03:54 PM	#158
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! Its gettin there Thanks!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-27-2005, 12:04 AM	#159
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! Update!! Got the old engine out and the 2 seperated. Tore into the engine compartment and am trying sort out the wiring. CUT out alot of wires that I wont need. I plan to fill some of the extra holes in the firewall that I wont need such as winsheild wiper motor, Cruise, AC, heat etc etc. I may keep the heater core so I can atleast have a defrost. I must have cut 10 pounds of wiring out. Im going to rebuild the 350 and put it into my C2500 Daily driver. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-30-2005, 10:21 PM	#162
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	Re: New Project truck!! keep the dang 350 and send me that 496

12-01-2005, 11:10 AM	#164
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	Re: New Project truck!! a 305, let me think about it...what heads...no, just kidding. LOL...I think I'll stick with walking truck is looking great man...

12-01-2005, 11:13 PM	#165
chuck1960 Junior Member Join Date: Oct 2005 Location: cleveland, tn. Posts: 71	Re: New Project truck!! Truck looks perfect, that's some great work. keep up the details & pics.

12-11-2005, 09:51 PM	#167
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! Found a dash and steering column from a 97 truck. Also got a set of power leather seats from a 95 truck. They will need recovered so I plan on doing some Katzkins on them. I still need some door panels and a few odds and ends. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-11-2005, 10:35 PM	#168
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: New Project truck!! Every time I look at this thread, the only word that comes to mind is SEXY! I feel like a junkie waiting on my fix (meaning more progress). Don't feel bad though my progress is ALOT slower than yours. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

12-11-2005, 10:54 PM	#169
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! Yeah I try not to think of the $$ I have put into this already!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-21-2005, 10:52 AM	#170
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: New Project truck!! You are you sick insane man! I love it! WOW good work! Do you ever slow down? The wheels were a great choice! And that garage, man .... __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD



Register or Log In To remove these advertisements.

12-22-2005, 03:27 AM	#172
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	Re: New Project truck!! Awsome buildup so far man. I'm very anxious to see the finish product! You make me feel like I'm working slow __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

01-02-2006, 12:44 AM	#174
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! Worked on the truck a little tonight. Got the dash out so I could get all the A/C and heat parts out. I am going to clean up the firewall so these must go. I also got my master cylinder mocked into place for the TKO tranny. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 01-02-2006 at 12:46 AM.

01-02-2006, 12:48 AM	#175
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: New Project truck!! I worked on the engine some also getting the heads bolted up and the timing chain cover. Also set the oil pump as well. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Register or Log In To remove these advertisements.