The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-12-2012, 03:25 PM   #1
mud slut 350
Registered User
 
mud slut 350's Avatar
 
Join Date: Jul 2011
Location: Navarre Fl
Posts: 93
sm465 hydraulic clutch slave bracket

quick question. I recently aquired a hydraulic clutch pedal setup to replace my mechanical setup on my 82 k 10 with sm465. my question is i need to make a bracket to mount the slave cyl to the bellhousing without getting a new bellhousing that already has it. has anyone made one for the stock slave? novak has one but its only for their slave. any info pics or links where i could get one or a template to make one let me know please im anxious to swap this in! also do i need to make any changes in the clutch itself? in the throwout bearing or anything?
__________________
82 k10 350sbc, sm465, np205, dana 60 front 14 bolt ff rear 4 inch susp lift 33's aka "MUD SLUT"

2007 cbr 1000rr
mud slut 350 is offline   Reply With Quote
Old 08-12-2012, 07:10 PM   #2
DirtyLarry
Windy Corner of a Dirty Street
 
DirtyLarry's Avatar
 
Join Date: Jun 2003
Location: Pueblo West, Colorado
Posts: 2,918
Re: sm465 hydraulic clutch slave bracket

Quote:
Originally Posted by mud slut 350 View Post
quick question. I recently aquired a hydraulic clutch pedal setup to replace my mechanical setup on my 82 k 10 with sm465. my question is i need to make a bracket to mount the slave cyl to the bellhousing without getting a new bellhousing that already has it. has anyone made one for the stock slave? novak has one but its only for their slave. any info pics or links where i could get one or a template to make one let me know please im anxious to swap this in! also do i need to make any changes in the clutch itself? in the throwout bearing or anything?
Advance Adapters has this one that works with a stock slave. I believe it will work with a stock SM465 bellhousing too. Not too bad at $40. I have this same bracket on my NV4500 and it works great!



You can use the same clutch, release bearing and fork as the mechanical set upů.Or at least I did without issue but some claim there is a different release bearing for hydro set ups which I see no difference plus the part numbers are listed as the same on the Napa and AC Delco websites.
DirtyLarry is offline   Reply With Quote
Old 08-12-2012, 07:45 PM   #3
mud slut 350
Registered User
 
mud slut 350's Avatar
 
Join Date: Jul 2011
Location: Navarre Fl
Posts: 93
Re: sm465 hydraulic clutch slave bracket

Awesome! Exactly what I need. I thought about making one but wasn't sure of the offset and all
Posted via Mobile Device
__________________
82 k10 350sbc, sm465, np205, dana 60 front 14 bolt ff rear 4 inch susp lift 33's aka "MUD SLUT"

2007 cbr 1000rr
mud slut 350 is offline   Reply With Quote
Old 05-06-2019, 04:22 PM   #4
jdalexa84
Registered User
 
Join Date: Dec 2013
Location: Lampasas, Texas
Posts: 221
Re: sm465 hydraulic clutch slave bracket

I know this is an ancient thread but did this bracket work for the Sm465.
jdalexa84 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com