The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-13-2017, 06:38 PM   #1
jaws61
Registered User
 
Join Date: Oct 2014
Location: Ontario
Posts: 136
Door latches? Altman or stock?

Hi Guys
I"m curious if its worth the money to buy the altman latches or just run the stock door latches, I"ve yet to paint the truck so what everyones opinion.. Its going on a 56 TF..
Thanks

Last edited by jaws61; 03-13-2017 at 06:44 PM.
jaws61 is offline   Reply With Quote
Old 03-13-2017, 07:46 PM   #2
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,134
Re: Door latches? Altman or stock?

Altman is a very good latch it does have a draw back of no locking mechanism with a key. on 1950 down

52 - 59 with the push button handles outside you use the button lock.
47-51 its a must to replace the latches because just hitting a bump in the road can open the door on turn down handles 52 to 59 not so much
dwcsr is offline   Reply With Quote
Old 03-13-2017, 08:00 PM   #3
capnduane
Registered User
 
capnduane's Avatar
 
Join Date: Jan 2014
Location: Moreno Valley, Calif.
Posts: 244
Re: Door latches? Altman or stock?

When I redid my 55 TF, 3 years ago, I replaced the drivers side door lock mechanism with a repro part. The original was worn out. The passenger side, I adjusted the latch plate, and they both have been golden ever since. When I first got the truck, the doors were held closed with a couple of barrel bolts!!!??? Yup, Bubba in action.....
__________________
'55 Chevy 1/2ton pickup w/ Pontiac 350 and Muncie M21 close ratio 4speed "Red Ryder"
capnduane is offline   Reply With Quote
Old 03-13-2017, 10:13 PM   #4
ndeep
Registered User
 
Join Date: Jan 2016
Location: Walnut Hill,Il
Posts: 56
Re: Door latches? Altman or stock?

only one choice if you want your doors to shut like a modern car--altman
ndeep is offline   Reply With Quote
Old 03-13-2017, 10:39 PM   #5
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,330
Re: Door latches? Altman or stock?

Others will chime in and say stock latches work fine if they're replaced with new. That said, I'm old enough to remember older cars doors opening on turns and spilling groceries and dogs - fortunately never kids but I imagine that must have happened too.

I installed Altman in my '55.2
__________________
'55 Big Window Shortbed,
Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's

Dan's '55 Big Window "Build" - Well, Kinda!
Dan in Pasadena is offline   Reply With Quote
Old 03-14-2017, 12:20 AM   #6
BIGglaSS
Registered User
 
BIGglaSS's Avatar
 
Join Date: May 2014
Location: ID
Posts: 663
Re: Door latches? Altman or stock?

My originals are worn out, I was researching this last week. Here's what I found. Altman are bolt in, but you will still have to cut sheet metal. $350.

Others, like http://www.hotrodlatches.com/default.asp or Autoloc are a simple bear claw. You will have to do the engineering, cutting, and welding to make it work. $50.

I was telling my Dad about this dilemma. Saturday, he shows up with a set of autoloc bear claws that he isn't going to use. I guess that is the direction I'm going.
BIGglaSS is offline   Reply With Quote
Old 03-14-2017, 12:53 AM   #7
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 5,989
Re: Door latches? Altman or stock?

Quote:
Originally Posted by dwcsr View Post
Altman is a very good latch it does have a draw back of no locking mechanism with a key. on 1950 down

52 - 59 with the push button handles outside you use the button lock.
47-51 its a must to replace the latches because just hitting a bump in the road can open the door on turn down handles 52 to 59 not so much
Or get NOS, I have NOS latches and handles, bought off Ebay.

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 03-14-2017, 03:17 PM   #8
b-mac
Registered User
 
b-mac's Avatar
 
Join Date: Mar 2014
Location: Wichita
Posts: 516
Re: Door latches? Altman or stock?

Martin,

Can we get a link? I'm having trouble finding them.
b-mac is offline   Reply With Quote
Old 03-14-2017, 03:52 PM   #9
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 5,989
Re: Door latches? Altman or stock?

I didn't find some just now, I am saying I have a pair of NOS latches and handles I bought for my 48 on eBay. I then bought a pair more of 53ish because I am thinking about changing them.

Point being they ARE there....but not every day. I did just find this one for the later suburban. http://www.ebay.com/itm/NOS-55-56-57...BYa8EH&vxp=mtr

Here are NOS strikers for your truck.

http://www.ebay.com/itm/NOS-1952-196...VYn1ld&vxp=mtr

Here is a Right latch. http://www.ebay.com/itm/1955-1959-Ch...pYuDOX&vxp=mtr

Here is how I find stuff I want on ebay. I make a search with a pretty liberal search words. 1956 Chevy truck door For instance, I do this in "advanced search" go to the bottom of the page to "Sort By" and put it on "TIME: Newly listed" this way I see what was the latest listed, going back to oldest. I check this every morning and find stuff EVERY TIME in a few days or weeks that has a good buy it now price or something and I get it. I will have a crap load of these searches saved to my favorites with all the different years, calling it a truck or a pickup, that sort of thing, I look at them all every morning, in only takes a few seconds being they are the newest listed and you saw the older ones yesterday.

I have found CRAP LOADS of stuff that way, NOS distributor, NOS Corvette 235 Intake, NOS latches, mouldings, headlamp rings, lights, Steering wheel, horn button, brake parts, etc. there is a lot of stuff out there!


Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 03-14-2017, 06:02 PM   #10
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 5,989
Re: Door latches? Altman or stock?

Here are a pair of NOS latches. They aren't cheap, but these aren't the ones I would buy with my "Check ever day newest listed" method. I would get these for a fraction of this when someone lists them wrong.

http://www.ebay.com/itm/1955-56-57-5...pXjpuJ&vxp=mtr

Here is another right one for ten dollars less than the one I previously posted.
http://www.ebay.com/itm/NOS-1955-195...ZYmKma&vxp=mtr

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 03-14-2017, 07:41 PM   #11
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,660
Re: Door latches? Altman or stock?

i've had repops on my 58 truk for 6 yrs and 30,000 miles they work fine
i have also driven these trucks since the 70s and have had worn out latches pop open
new reproductions is what i recommend, just replace them every 60,000 miles

dang... truk is half way there
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 03-18-2017, 11:32 PM   #12
Russell Ashley
Registered User
 
Russell Ashley's Avatar
 
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,640
Re: Door latches? Altman or stock?

I have re-pop latches and striker plates on my truck and the doors close and latch great. Adjusting the latches and striker plates before installing the rubber door seal makes getting the doors adjusted much easier.
Russell Ashley is offline   Reply With Quote
Old 03-19-2017, 12:18 AM   #13
bajabob
Registered User
 
bajabob's Avatar
 
Join Date: Dec 2009
Location: Ventura, Ca.
Posts: 439
Re: Door latches? Altman or stock?

Quote:
Originally Posted by MARTINSR View Post
Or get NOS, I have NOS latches and handles, bought off Ebay.

Brian

Yea what he said

I have a bunch of repo crap I'll sell you cheap, cheap cheap!!!!
bajabob is offline   Reply With Quote
Old 09-04-2020, 09:02 PM   #14
Khaus
Registered User
 
Join Date: Sep 2017
Location: Calgary Alberta
Posts: 27
Re: Door latches? Altman or stock?

https://lsfab.ca/product/1947-1951-c...-door-latches/

https://lsfab.ca/product/1952-1954-c...-door-latches/
Khaus is offline   Reply With Quote
Old 09-05-2020, 02:16 PM   #15
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,242
Re: Door latches? Altman or stock?

My wife still has the scars on her face and knees from falling out of our 48 42 years ago when the not all that worn 5 year old bought from the GM Dealer in McGregor TX genuine GM latche failed. I bought and installed them in May of 73 and it failed (passenger door) in the fall of 78. Both latch and striker had been replaced in73.

The driver's door flew open on me about the third day I had the truck when I was making a right hand corner two blocks from my house in Texas and I went straight to the dealer and bought new latches. I had one arm hooked on the window sill, one hand on the wheel and my right foot hooked around the brake pedal. Just luckily no one was parked at the soft ball field and no kids were out there.

Altman's latches aren't cheap but that is well spent money.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 09-08-2020, 11:51 AM   #16
57tailgater
Registered User
 
Join Date: Nov 2011
Location: Middle Georgia
Posts: 283
Re: Door latches? Altman or stock?

My lower hinge pockets aren't so good and will eventually be fixed. Way back when I was making a right turn the driver's door flew open - woah!! Never had the passenger door fly open. Started looking at it and noticed someone had changed the driver's door striker to one of a different model which probably explains the sudden opening and latch wear. But the part on the door latch has worn due to this. I have some bearclaws I am potentially planning on using when I get to that point.
57tailgater is offline   Reply With Quote
Old 09-08-2020, 07:40 PM   #17
jackson
Registered User
 
Join Date: Jan 2012
Location: el campo texas
Posts: 322
Re: Door latches? Altman or stock?

has anyone that has boxed his frame still have issues with doors opening ive noticed the old trucks seem to twist a little
jackson is offline   Reply With Quote
Old 09-19-2020, 09:52 AM   #18
carbuff382
Registered User
 
carbuff382's Avatar
 
Join Date: Oct 2012
Location: ALBUQUERQUE,N.M.
Posts: 447
Re: Door latches? Altman or stock?

I've got a TCI fully boxed frame with stock door latches and haven't had any issues. And hopefully won't!
carbuff382 is offline   Reply With Quote
Old 09-22-2020, 04:52 PM   #19
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,660
Re: Door latches? Altman or stock?

Quote:
Originally Posted by jackson View Post
has anyone that has boxed his frame still have issues with doors opening ive noticed the old trucks seem to twist a little
you have a 49, the later trucks have double detent latch door latches
truk has a boxed frame and new repop latches, the doors have never inadvertently unlatched
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 09-30-2020, 10:20 AM   #20
rollinrooster
Registered User
 
rollinrooster's Avatar
 
Join Date: Apr 2010
Location: Morristown TN.
Posts: 355
Re: Door latches? Altman or stock?

Im running the Altman. Heard to many stories from everyone in my circle about the doors flying open. Altman is well worth the money and my doors open and close now better than my 2018 2500HD.
rollinrooster is offline   Reply With Quote
Old 10-04-2020, 12:24 AM   #21
mick53
Registered User
 
Join Date: Oct 2018
Location: Warsaw IN
Posts: 881
Re: Door latches? Altman or stock?

I always just warned the ladies so they would scoot over next to me.
mick53 is offline   Reply With Quote
Old 10-17-2020, 07:22 PM   #22
jocww
Registered User
 
Join Date: Aug 2017
Location: San Ramon, Ca
Posts: 251
Re: Door latches? Altman or stock?

Would these latches work with tesla door handles? Thats my next mod I think.
__________________
My build a 49 5 window ls1 4l60e on a TCI chassis
http://67-72chevytrucks.com/vboard/s...d.php?t=754926

My travel blog
The Wong Winding Road-Adventures of The Chinese Cowboy
https://thewongwindingroad.blogspot.com/
jocww is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com