FiTech Fuel injection - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LostMy65** · 08-03-2019, 12:11 PM

Looks like Fitech created an even a more economical option. $687.
https://www.jegs.com/i/FITech+Fuel+I...RoCmLUQAvD_BwE

sweetk30 · 08-03-2019, 03:22 PM

i see thay started separating the ecm from the unit . must be to much heat soak killing them . a member on the other forum i am on had his ecm fail on his fitech after a engine bay wash down and he even stayed away from direct blasting it .

**LostMy65** · 01-07-2020, 08:12 PM

For some reason I still feel a little uneasy going long distance with fitech.
My thoughts are to keep a carb behind the seat with some simple tools. I think I could easily swap back to carb on the road to tide me over until I get back home.
Thoughts?

sweetk30 · 01-07-2020, 08:36 PM

fuel pump setup ? if only efi HIGH psi then carb no good unless you bring regulator and return line from it to tank .

i have close to 4k miles daily driving / plowing snow / towing trailers with my edelbrock pro flo 4 and she is GREAT ! . . . that holley sniper i had for 500 miles of PURE hell no thanks never again . i will not support any of there products or brands anymore the way i was treated .

**LostMy65** · 01-07-2020, 10:00 PM

Mine is with the fuel command center. So I would just reroute the line from the mechanical fuel pump to the carb.

SunSoaked · 01-07-2020, 10:13 PM

I'm with sweetk30. I **** canned that POS Sniper and went back to carb. I had zero problems with my original Pro-flo 10+ years running. I will never give Holley another dollar.

SunSoaked · 01-07-2020, 10:14 PM

Quote:

Originally Posted by SunSoaked

I'm with sweetk30. I **** canned that POS Sniper and went back to carb. I had zero problems with my original Pro-flo 10+ years running. I will never give Holley another dollar.

S_h_i_t...canned!

weq92f · 01-08-2020, 01:29 AM

.
Over 3000 miles MSD Atomic full kit.

-- only trouble has been IAC failed

-klb

sweetk30 · 01-08-2020, 08:20 AM

maybe holley and msd use the same IAC since there both owned by the same company and holley has lots of problems with them from stuff i have read .

08-03-2019, 12:11 PM	#26
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,497	Re: FiTech Fuel injection Looks like Fitech created an even a more economical option. $687. https://www.jegs.com/i/FITech+Fuel+I...RoCmLUQAvD_BwE __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-03-2019, 03:22 PM	#27
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: FiTech Fuel injection i see thay started separating the ecm from the unit . must be to much heat soak killing them . a member on the other forum i am on had his ecm fail on his fitech after a engine bay wash down and he even stayed away from direct blasting it . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

01-07-2020, 08:12 PM	#28
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,497	Re: FiTech Fuel injection For some reason I still feel a little uneasy going long distance with fitech. My thoughts are to keep a carb behind the seat with some simple tools. I think I could easily swap back to carb on the road to tide me over until I get back home. Thoughts? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-07-2020, 08:36 PM	#29
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: FiTech Fuel injection fuel pump setup ? if only efi HIGH psi then carb no good unless you bring regulator and return line from it to tank . i have close to 4k miles daily driving / plowing snow / towing trailers with my edelbrock pro flo 4 and she is GREAT ! . . . that holley sniper i had for 500 miles of PURE hell no thanks never again . i will not support any of there products or brands anymore the way i was treated . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

01-07-2020, 10:00 PM	#30
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,497	Re: FiTech Fuel injection Mine is with the fuel command center. So I would just reroute the line from the mechanical fuel pump to the carb. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-07-2020, 10:13 PM	#31
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Re: FiTech Fuel injection I'm with sweetk30. I **** canned that POS Sniper and went back to carb. I had zero problems with my original Pro-flo 10+ years running. I will never give Holley another dollar.

01-08-2020, 01:29 AM	#33
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 2,900	Re: FiTech Fuel injection . Over 3000 miles MSD Atomic full kit. -- only trouble has been IAC failed -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

01-08-2020, 08:20 AM	#34
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: FiTech Fuel injection maybe holley and msd use the same IAC since there both owned by the same company and holley has lots of problems with them from stuff i have read . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.