83 Short Step. First vehicle=First Project - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ndametz32 · 07-03-2009, 07:07 PM

I say he'd like to spend 3,500 at most. That's how much he's looking to sell the Vette for. And he would like a project/driver

JohnC · 07-04-2009, 07:41 AM

OK cool man I'll keep an eye out.

ndametz32 · 07-18-2009, 11:04 AM

Well.. My dad decided to keep his Corvette and put the 350 in it. Good news is I get the block that's coming out of the Vette!

JohnC · 07-18-2009, 01:12 PM

Woohoo!

ndametz32 · 08-03-2009, 09:35 PM

Got a TON done this weekend. With the help of my dad I got in my bucket seats, and built a center console which houses my 6x9's. And we cleaned the garage!

The console is a little rough but hopefully soon we'll fiberglass it and paint it. On to the pictures!

ndametz32 · 08-03-2009, 09:36 PM

And a little advice for someone who is planning on building a center console. 15/32" ply is not thick enough! The sheet warped bad and made it hard to make it straight. Alot of wood puddy was used

JohnC · 08-04-2009, 07:52 AM

Looks good man.

80chevyshortbox · 08-04-2009, 07:03 PM

that looks great man that pritty much what i wanted for a consol in my truck but a 10 inch sub insted of 6x9 and also some cup holders. but it looks sweet.

ndametz32 · 08-04-2009, 09:54 PM

Quote:

Originally Posted by 80chevyshortbox

that looks great man that pritty much what i wanted for a consol in my truck but a 10 inch sub insted of 6x9 and also some cup holders. but it looks sweet.

Mine is actually gonna get a 10 and some cup holders in that lower part

TheSunDanceKid · 08-16-2009, 04:24 PM

easy cup holder get 4" of black pvc pipe take a hole saw cut the circle out atach the pvc pipe in the hole use the piece of wood left ftom the hole and theres the bottom of your cup holder plumers strap works good to atach it from the underside

86 Red_Bowtie · 09-14-2009, 02:28 AM

What we have always used for cup holders in the console we have made was 4" subwoofer speaer box air port tubes because they have the rolled edges that lets them sit flush agaist the console.

diamondave · 09-14-2009, 08:18 AM

Nice rig... I almost bought something simular back in my teen years... But the rents said I had too many cars.. I didnt think 5 was too many

(72 nova, 70 Caprice, 69 camaro, 75 camaro, and a 76 blazer)

If you go 2-tone... remeber the lighter of the 2 goes to the bottom... specially if your "Slammin" it.. shows it better IMO...

Nice to see a father & Son projects! Me and mine race a A-Mod together.

Chlsnk · 12-30-2009, 10:25 PM

I was visiting my aunt in Witchata over thanksgiving and could of sworn I saw this truck.

ndametz32 · 01-02-2010, 09:41 PM

^ very possible. im in wichita a lot

jitteryguy · 01-03-2010, 10:04 PM

nise start on yer truck, I just made a console for the back od my dually, it will house a 10" sub inside it, work'n on the front console now. the drink holder will be the same idea.

both piece's have a hole , the top be'n slightly larger and I used 1" dowle rod to seprate em. the console is wrap'd in vynal and the top will be stain'd

ndametz32 · 02-12-2010, 12:02 AM

i had a pretty big uh oh today... long story short, its time to start building that 350...

GmtGmt · 02-12-2010, 09:04 AM

Weed Eater

didnt know Carbs where that green lol

JohnC · 02-12-2010, 12:03 PM

No but I bet you would get the yard mowed fast with that setup on the mower. I need to look into that model of mower.

ndametz32 · 02-13-2010, 12:46 AM

lawn mower with a vic. jr and a holley carb. 350+ horsepower lol front yard down in 6.8 seconds

JohnC · 02-13-2010, 11:16 AM

MrBeast · 02-13-2010, 12:49 PM

Thats a cool truck you have coming togeather, im in the process of building an 85. Gonna do a custom console in it as well. this is the look im going for with mine.

I also want to build a matching overhead console.

It sounds like you have some big plans for the truck, I think it would look damn good in the orange you are looking at. Expecially with a couple of well placed flat black pin stripes,

WillieloRidez · 02-02-2011, 12:28 PM

Saw this for sale on craigslist any updates?

07-03-2009, 07:07 PM	#51
ndametz32 Fire Truck Join Date: Jun 2009 Location: Wichita, Kansas Posts: 74	Re: 83 Short Step. First vehicle=First Project I say he'd like to spend 3,500 at most. That's how much he's looking to sell the Vette for. And he would like a project/driver __________________ -Nick '83 Chevrolet Silverado Stepside http://67-72chevytrucks.com/vboard/s...d.php?t=349394

07-04-2009, 07:41 AM	#52
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 83 Short Step. First vehicle=First Project OK cool man I'll keep an eye out.

07-18-2009, 11:04 AM	#53
ndametz32 Fire Truck Join Date: Jun 2009 Location: Wichita, Kansas Posts: 74	Re: 83 Short Step. First vehicle=First Project Well.. My dad decided to keep his Corvette and put the 350 in it. Good news is I get the block that's coming out of the Vette! __________________ -Nick '83 Chevrolet Silverado Stepside http://67-72chevytrucks.com/vboard/s...d.php?t=349394

07-18-2009, 01:12 PM	#54
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 83 Short Step. First vehicle=First Project Woohoo!

08-03-2009, 09:35 PM	#55
ndametz32 Fire Truck Join Date: Jun 2009 Location: Wichita, Kansas Posts: 74	Re: 83 Short Step. First vehicle=First Project Got a TON done this weekend. With the help of my dad I got in my bucket seats, and built a center console which houses my 6x9's. And we cleaned the garage! The console is a little rough but hopefully soon we'll fiberglass it and paint it. On to the pictures! __________________ -Nick '83 Chevrolet Silverado Stepside http://67-72chevytrucks.com/vboard/s...d.php?t=349394

08-03-2009, 09:36 PM	#56
ndametz32 Fire Truck Join Date: Jun 2009 Location: Wichita, Kansas Posts: 74	Re: 83 Short Step. First vehicle=First Project And a little advice for someone who is planning on building a center console. 15/32" ply is not thick enough! The sheet warped bad and made it hard to make it straight. Alot of wood puddy was used __________________ -Nick '83 Chevrolet Silverado Stepside http://67-72chevytrucks.com/vboard/s...d.php?t=349394

08-04-2009, 07:52 AM	#57
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 83 Short Step. First vehicle=First Project Looks good man.

08-04-2009, 07:03 PM	#58
80chevyshortbox Registered User Join Date: Jun 2009 Location: lethbridge Posts: 269	Re: 83 Short Step. First vehicle=First Project that looks great man that pritty much what i wanted for a consol in my truck but a 10 inch sub insted of 6x9 and also some cup holders. but it looks sweet.

08-16-2009, 04:24 PM	#60
TheSunDanceKid Registered User Join Date: Aug 2009 Location: chandler, arizona Posts: 125	Re: 83 Short Step. First vehicle=First Project easy cup holder get 4" of black pvc pipe take a hole saw cut the circle out atach the pvc pipe in the hole use the piece of wood left ftom the hole and theres the bottom of your cup holder plumers strap works good to atach it from the underside

09-14-2009, 02:28 AM	#61
86 Red_Bowtie Registered User Join Date: Nov 2003 Location: South Wichita,KS Posts: 698	Re: 83 Short Step. First vehicle=First Project What we have always used for cup holders in the console we have made was 4" subwoofer speaer box air port tubes because they have the rolled edges that lets them sit flush agaist the console. __________________ Sean Midwest All Truck Nationals, Riverside, MO - 2008 - 2015

09-14-2009, 08:18 AM	#62
diamondave Registered User Join Date: Jul 2009 Location: Luverne,Mn Posts: 92	Re: 83 Short Step. First vehicle=First Project Nice rig... I almost bought something simular back in my teen years... But the rents said I had too many cars.. I didnt think 5 was too many (72 nova, 70 Caprice, 69 camaro, 75 camaro, and a 76 blazer) If you go 2-tone... remeber the lighter of the 2 goes to the bottom... specially if your "Slammin" it.. shows it better IMO... Nice to see a father & Son projects! Me and mine race a A-Mod together. __________________ Static Dropped 1988 Chevrolet ECLB "Hovering less then 3 inches from the ground... full-time"

12-30-2009, 10:25 PM	#63
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: 83 Short Step. First vehicle=First Project I was visiting my aunt in Witchata over thanksgiving and could of sworn I saw this truck. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

01-02-2010, 09:41 PM	#64
ndametz32 Fire Truck Join Date: Jun 2009 Location: Wichita, Kansas Posts: 74	Re: 83 Short Step. First vehicle=First Project ^ very possible. im in wichita a lot __________________ -Nick '83 Chevrolet Silverado Stepside http://67-72chevytrucks.com/vboard/s...d.php?t=349394

01-03-2010, 10:04 PM	#65
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: 83 Short Step. First vehicle=First Project nise start on yer truck, I just made a console for the back od my dually, it will house a 10" sub inside it, work'n on the front console now. the drink holder will be the same idea. both piece's have a hole , the top be'n slightly larger and I used 1" dowle rod to seprate em. the console is wrap'd in vynal and the top will be stain'd __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

02-12-2010, 12:02 AM	#66
ndametz32 Fire Truck Join Date: Jun 2009 Location: Wichita, Kansas Posts: 74	Re: 83 Short Step. First vehicle=First Project i had a pretty big uh oh today... long story short, its time to start building that 350... __________________ -Nick '83 Chevrolet Silverado Stepside http://67-72chevytrucks.com/vboard/s...d.php?t=349394



Register or Log In To remove these advertisements.

02-12-2010, 12:03 PM	#68
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 83 Short Step. First vehicle=First Project No but I bet you would get the yard mowed fast with that setup on the mower. I need to look into that model of mower.

02-13-2010, 12:46 AM	#69
ndametz32 Fire Truck Join Date: Jun 2009 Location: Wichita, Kansas Posts: 74	Re: 83 Short Step. First vehicle=First Project lawn mower with a vic. jr and a holley carb. 350+ horsepower lol front yard down in 6.8 seconds __________________ -Nick '83 Chevrolet Silverado Stepside http://67-72chevytrucks.com/vboard/s...d.php?t=349394

02-13-2010, 11:16 AM	#70
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 83 Short Step. First vehicle=First Project

02-13-2010, 12:49 PM	#71
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: 83 Short Step. First vehicle=First Project Thats a cool truck you have coming togeather, im in the process of building an 85. Gonna do a custom console in it as well. this is the look im going for with mine. I also want to build a matching overhead console. It sounds like you have some big plans for the truck, I think it would look damn good in the orange you are looking at. Expecially with a couple of well placed flat black pin stripes, __________________ "He used to be a pretty nice feller, now he's a welder!"

02-02-2011, 12:28 PM	#72
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 83 Short Step. First vehicle=First Project Saw this for sale on craigslist any updates? __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

Register or Log In To remove these advertisements.