FS: 68 Dash/gauges, SB/Vortec eng. parts, mini starter, more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rin68 · 01-25-2005, 07:47 PM

Cleaned out the garage this weekend. If no one is interested the parts will go on ebay in a couple days. All items are OBO

-Complete dash bezel/gauges out of the 68. All gauges functioned when the dash was removed. $30+ship

-Centerlink from a 71-72 (I think?) 2wd 1/2 ton. I can measure it to verify the year if someone can give me the numbers. $15+ship

-GM ministarter, staggered pattern for 168 tooth flywheel/flexplate. Less than 50 miles on it. $50+ship

The following parts are off of a 1998 Vortec 350

-Full set of connecting rods and pistons. Rods are in good shape, even though the number 5 rod bearing spun. (The crank took all the damage, it's missing over .040" of material on that journal) I believe these are the powdered metal connecting rods. $35+ship

-Driver's side exhaust manifold and EGR pipe, also full set of spark plug heat shields. $25+ship

-Balancer and flexplate. $25+ship each

-Stock hydraulic roller cam from engine. $20+ship

Post/PM any questions. Thanks

Super Duck · 01-25-2005, 08:30 PM

The pics didnt come up

ljbear · 01-25-2005, 09:00 PM

I'm interested in the starter. Is it a GM or aftermarket? Could you tell me what the bolt pattern is on it as well? Thanks

LUV2XCLR8 · 01-25-2005, 09:01 PM

Quote:

Originally Posted by rin68

Complete dash bezel/gauges out of the 68. All gauges functioned when the dash was removed. $30+ship

MAN I MIGHT NEED THIS BADLY, CAN YA GIVE ME A WEEK ON IT

Jimbotronics · 01-25-2005, 09:09 PM

Hey Rin68 - if you edit your post and remove the .orig from each of the photo links the pictures should display.

I was able to see the photos by right clicking the image and then cut and pasting the url into my browser without the .orig. Cheers, Jim.

rin68 · 01-25-2005, 10:50 PM

Thanks for the help jim, pics seem to be working now

LUV2XCLR8-I can wait a bit, let me know when you get it figured out

ljbear-Starter appears to be very similar to the GM mini-starters, but I don't know for sure. Bolt pattern is the standard GM staggered, not the straight across

LUV2XCLR8 · 01-25-2005, 11:13 PM

Quote:

Originally Posted by rin68

LUV2XCLR8-I can wait a bit, let me know when you get it figured out

WORKING A DEAL ON A 68 50TH, GAUGE CLUSTER IS ONE OF THE MISSING ITEMS

Alvin · 01-25-2005, 11:39 PM

How much for shipping on the pistons/connecting rods to zip 45069? I've been looking at powdered metal rods for awhile now.

rin68 · 01-26-2005, 01:11 AM

sorry alvin, rods are sold already. if something doesn't work out you're next in line

rin68 · 01-29-2005, 02:59 PM

ttt

rods/pistons, starter are sold. sale on the dash is pending.

01-25-2005, 07:47 PM	#1
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	FS: 68 Dash/gauges, SB/Vortec eng. parts, mini starter, more Cleaned out the garage this weekend. If no one is interested the parts will go on ebay in a couple days. All items are OBO -Complete dash bezel/gauges out of the 68. All gauges functioned when the dash was removed. $30+ship -Centerlink from a 71-72 (I think?) 2wd 1/2 ton. I can measure it to verify the year if someone can give me the numbers. $15+ship -GM ministarter, staggered pattern for 168 tooth flywheel/flexplate. Less than 50 miles on it. $50+ship The following parts are off of a 1998 Vortec 350 -Full set of connecting rods and pistons. Rods are in good shape, even though the number 5 rod bearing spun. (The crank took all the damage, it's missing over .040" of material on that journal) I believe these are the powdered metal connecting rods. $35+ship -Driver's side exhaust manifold and EGR pipe, also full set of spark plug heat shields. $25+ship -Balancer and flexplate. $25+ship each -Stock hydraulic roller cam from engine. $20+ship Post/PM any questions. Thanks __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies Last edited by rin68; 01-25-2005 at 10:26 PM.

01-25-2005, 08:30 PM	#2
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	The pics didnt come up __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

01-25-2005, 09:00 PM	#3
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	I'm interested in the starter. Is it a GM or aftermarket? Could you tell me what the bolt pattern is on it as well? Thanks __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

01-25-2005, 09:09 PM	#5
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Hey Rin68 - if you edit your post and remove the .orig from each of the photo links the pictures should display. I was able to see the photos by right clicking the image and then cut and pasting the url into my browser without the .orig. Cheers, Jim. __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

01-25-2005, 10:50 PM	#6
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	Thanks for the help jim, pics seem to be working now LUV2XCLR8-I can wait a bit, let me know when you get it figured out ljbear-Starter appears to be very similar to the GM mini-starters, but I don't know for sure. Bolt pattern is the standard GM staggered, not the straight across __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies

01-25-2005, 11:39 PM	#8
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	How much for shipping on the pistons/connecting rods to zip 45069? I've been looking at powdered metal rods for awhile now. __________________ Ethel - The Legend Continues... Ethel has been sold.

01-26-2005, 01:11 AM	#9
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	sorry alvin, rods are sold already. if something doesn't work out you're next in line __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies

01-29-2005, 02:59 PM	#10
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	ttt rods/pistons, starter are sold. sale on the dash is pending. __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.