The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-10-2019, 08:52 AM   #1
Nestevec
Registered User
 
Nestevec's Avatar
 
Join Date: Jan 2018
Location: Waterloo,Nebraska
Posts: 309
1972 radiator replacement

When I bought my 72 K5 it already had a Griffin radiator in it. I had never really heard anything positive about the Griffin radiators to begin with. Well, what started as a slow leak is now a constant drip. I’ve got a DeWitts radiator in my 70 Chevelle and love it. Just wondering if anyone has used them in their K5 or what is a good replacement. Thanks, Steve
Nestevec is offline   Reply With Quote
Old 01-11-2019, 08:26 PM   #2
cleszkie
Registered User
 
cleszkie's Avatar
 
Join Date: Feb 2003
Location: Santa Ana, CA
Posts: 2,191
Re: 1972 radiator replacement

Many aftermarket aluminum radiators are not fully welded. That is to say that the tanks are expoxied to the core and not welded. These units have the highest rate of failure in my experience. Then there are all the fully welded aluminum units that do not fit correctly in the stock cradles, despite being advertised as direct bolt-ins. The poor fit causes stress and movement that eventually fatigues and cracks the aluminum at some weak point.

With that said, I have had very good fit, performance, and longevity from my two-row, cross-flow, fully welded aluminum radiator from BeCool. It was a bit more expensive than many others out there, but it has served me well.
cleszkie is offline   Reply With Quote
Old 01-11-2019, 08:28 PM   #3
notsolo
Registered User
 
notsolo's Avatar
 
Join Date: Apr 2008
Location: Md
Posts: 2,446
Re: 1972 radiator replacement

I bought a 4 core replacement from Orielly's. Close to original, filler cap is set different....Otherwise good quality and decent price.
notsolo is offline   Reply With Quote
Old 01-11-2019, 11:33 PM   #4
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,919
Re: 1972 radiator replacement

I have a Dewitt’s but haven’t ran it. Fits in the stock spot for me. They also sell their own rubber cushions for it.
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is online now   Reply With Quote
Old 01-12-2019, 03:47 PM   #5
Ewr101
Registered User
 
Ewr101's Avatar
 
Join Date: Dec 2014
Location: Spring, Tx
Posts: 244
Re: 1972 radiator replacement

I got the MC369 from Jeg's. Fit perfect and has been working great for a few years now. Texas summers are no joke and this thing never bats an eye.
__________________
72 Chevy 2WD Blazer
Ewr101 is offline   Reply With Quote
Old 01-13-2019, 12:27 PM   #6
BIG BLOCK JIMMY
Registered User
 
BIG BLOCK JIMMY's Avatar
 
Join Date: Jul 2018
Location: FL and WV
Posts: 135
Re: 1972 radiator replacement

This was one of the first things I replaced as soon as I got my Jimmy... and before I knew about this forum:
https://www.summitracing.com/parts/SUM-384001
I would not recommend!
It seems to be good quality except the petcock drips a few times a day and I can't make it stop. As far as fitting goes, the lower radiator hose fitting is straight instead of angled up and the radiator sits about 1" off center. I really wish I sent it back, but I was too impatient.
I'm going to have some radiator mounts made that will be adjustable to center this one and any future radiators.
Unrelated, but I added a clear coolant filter so the new radiator wouldn't get all the crap in it from what was in the block. Very happy I did too! I also added a remote trans filter until I put the new transmission in.
__________________
72' JIMMY 454
BIG BLOCK JIMMY is offline   Reply With Quote
Old 01-13-2019, 06:40 PM   #7
scott123
Registered User
 
Join Date: Dec 2007
Location: Middleburg, North Carolina
Posts: 462
Re: 1972 radiator replacement

Agree on the Griffin.

We used them in our dirt race cars for years and I never saw one fail unless it was from a collision.

I put one in my truck as a direct fit and in time the epoxied edges gave up and had a leak. I re-epoxied in an attempt to save the radiator but it was to no avail.

I found a stock type and had it re-built. So far so good.

S
scott123 is offline   Reply With Quote
Old 01-15-2019, 04:55 PM   #8
cleszkie
Registered User
 
cleszkie's Avatar
 
Join Date: Feb 2003
Location: Santa Ana, CA
Posts: 2,191
Re: 1972 radiator replacement

Quote:
Originally Posted by BIG BLOCK JIMMY View Post
It seems to be good quality except the petcock drips a few times a day and I can't make it stop.
Replacement radiator petcocks are available at just about any auto parts store. They are threaded into the radiator, not welded in.
cleszkie is offline   Reply With Quote
Old 01-15-2019, 09:59 PM   #9
BIG BLOCK JIMMY
Registered User
 
BIG BLOCK JIMMY's Avatar
 
Join Date: Jul 2018
Location: FL and WV
Posts: 135
Re: 1972 radiator replacement

Yes Sir... it was a new radiator and I didn't think I needed to test the petcock. Of course after filling with all kinds of fancy fluids I wished that I did. It doesn't drip that much, just enough to be annoying. I'm going to flush everything soon to clean up the last nasties from the old radiator and I will fix it then.
__________________
72' JIMMY 454
BIG BLOCK JIMMY is offline   Reply With Quote
Old 01-16-2019, 09:09 PM   #10
Mike C
Registered User
 
Mike C's Avatar
 
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
Re: 1972 radiator replacement

I have a Griffin in mhy '69 Camaro. It is the two tube 1.25" HD cooling version. I paid $249 and welded my own brackets on it back when direct fits were $700 without the Chinese option. It has been great.

I bought a Dewitts for my big block conversion in my '64 'vette. It is absolutely awesome. But it was the second most expensive part I've ever bought at $1200. Can buy a LOT of Chinese radiators for that kind of money...
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
Mike C is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com