|
08-22-2003, 11:21 PM
|
#1 |
|
student wrench turner
Join Date: Jan 2003
Location: wrightstown, wisconsin
Posts: 192
|
bumpstops
i recently cut the front springs on my 69 c-10 and now the truck bottoms out on the bumpstop bracket on the lower control arm. I was going to cut it off but it looked like it also stopped the tires from turning too far. I am wondering how much farther the wheels would turn without this in place. Any help would be appreciated.
__________________
1969 Chevy C-10 with 250 L6 2002 GMC Sierra 2500 HD Duramax with banks six gun |
|
|
|
08-22-2003, 11:59 PM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
I cut the bumpstops off, & left the portion that was steering stop, then welded a pc of flatstock on the back to reinforce. For bumpstops, I drilled a hole in the a arm, & used traction bar "snubbers". crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
