|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-02-2016, 02:05 PM
|
#1 |
|
Registered User
Join Date: Apr 2008
Location: Tenino, Washington
Posts: 51
|
Can I use a block Mount Mini starter to replace my Belhousing mount starter ?
I've searched the forums a bit but didn't come up with an answer . I have a 72 Blazer 350 4x4 with 4speed and was wanting to upgrade my stock Starter to a high torque Mini Starter . Wasn't sure if I could do this with having a bell housing mounted factory starter. Has anyone tried? Block has the mounting holes I'm just not sure if there is any issues with clearance on the bell housing .... Any Help would be appreciated . Thanks
|
|
|
|
05-02-2016, 04:06 PM
|
#2 |
|
Registered User
Join Date: Apr 2008
Location: Tenino, Washington
Posts: 51
|
Re: Can I use a block Mount Mini starter to replace my Belhousing mount starter ?
I found my answer after searching more . Looks like I can use the block mounting holes without interference from the Bell housing .
|
|
|
|
|
05-02-2016, 09:01 PM
|
#3 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
|
Re: Can I use a block Mount Mini starter to replace my Belhousing mount starter ?
Yes as you've seen. I have one on my Jimmy. I went with the style that did not support the bendix on both ends as that meant there was nothing that had to go into the bellhousing that might interfere. But I would think either would work.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
