power window regulators on the cheap - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mmiddle · 11-14-2013, 12:30 AM

well Crap! I should have read further down.

Also look at www.mouser.com/ They are in Mansfield, Tx They are a electronics components supply company

**70STOVEBOLT** · 11-14-2013, 05:57 PM

Has anyone who did this mod tested them in the truck yet?

bonnieclyde100 · 11-14-2013, 06:17 PM

Quote:

Originally Posted by 70STOVEBOLT

Has anyone who did this mod tested them in the truck yet?

mine have been in my truck for almost a month and they work great better than the aftermaket kits that turn the hand crank shaft to raise and lower the window and it is closer to what stock would be

**70STOVEBOLT** · 11-14-2013, 06:33 PM

Does it matter what year the motor comes from? I see a bunch of different part numbers but they all look very similar. I know there are different numbers of teeth, looks like we need 9 tooth motors.

bonnieclyde100 · 11-14-2013, 11:36 PM

Quote:

Originally Posted by 70STOVEBOLT

Does it matter what year the motor comes from? I see a bunch of different part numbers but they all look very similar. I know there are different numbers of teeth, looks like we need 9 tooth motors.

mine is one that is for 1991 chevy truck but there is probably many that will work

sbknorr69 · 08-02-2016, 05:57 PM

I just came across this post and was wondering if anyone was able to do a drawing in Sketchup. I tried to hand draw a pattern but without right angles it is difficult with the measurements that are given.

Cj Davidson · 11-30-2019, 09:18 PM

Quote:

Originally Posted by jimcaf

I did mine a few weeks ago right after I saw this post, Thanks for the great post bonnieclyde100,, they work amazing,lots of power they roll up fast enough where youll want to make sure your fingers are clear

Did you have any problems with yours.?Does the motor brackets need to be at an angle or will it work like you have in the pic?
Posted via Mobile Device

kehstr · 12-03-2019, 01:07 AM

Glad I stumbled across this!! Now I just need to find a switch I like

sipper · 12-04-2019, 06:58 PM

I have these
https://www.nu-relics.com/Nu-Cranks-s/190.htm

a little pricey, but really cool.

11-14-2013, 12:30 AM	#51
mmiddle Registered User Join Date: Jul 2013 Location: Forestburg, Texas Posts: 659	Re: power window regulators on the cheap well Crap! I should have read further down. Also look at www.mouser.com/ They are in Mansfield, Tx They are a electronics components supply company __________________ Mark Jesus is the Way! 2003 2500HD CCLB Duramax/Ali (Clifford) 2014 2SS/RS black on black Camaro (Betty) 2006 Pontiac SOLSTICE silver/black (Lula-Bell) 1970 C/10 Short Wide (Peggy) 1964 C/10 Short Step (Hambone) RIP Jimmy Hamilton Thank you for the trucks

11-14-2013, 05:57 PM	#52
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,210	Re: power window regulators on the cheap Has anyone who did this mod tested them in the truck yet? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

11-14-2013, 06:33 PM	#54
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,210	Re: power window regulators on the cheap Does it matter what year the motor comes from? I see a bunch of different part numbers but they all look very similar. I know there are different numbers of teeth, looks like we need 9 tooth motors. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

08-02-2016, 05:57 PM	#56
sbknorr69 Registered User Join Date: Jul 2014 Location: berwick pa Posts: 5	Re: power window regulators on the cheap I just came across this post and was wondering if anyone was able to do a drawing in Sketchup. I tried to hand draw a pattern but without right angles it is difficult with the measurements that are given.

12-03-2019, 01:07 AM	#58
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 748	Re: power window regulators on the cheap Glad I stumbled across this!! Now I just need to find a switch I like __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

12-04-2019, 06:58 PM	#59
sipper Registered User Join Date: Oct 2015 Location: wyoming ontario Posts: 40	Re: power window regulators on the cheap I have these https://www.nu-relics.com/Nu-Cranks-s/190.htm a little pricey, but really cool.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.